Keith said to remember OSPF Neighbors need to match and the acronym TANMAT helps T-Timers A-Area N-Network Address M-MTU A-Authentication T-Type (Network Type) And THIS is why I always watch Keith Barkers channel.
Thank you! I needed this because I might forget when I do not use it. Your contribution to the IT community is priceless. Hope you still have the energy & means to keep on doing this.
OSPF for Router to enable OSPF >>RAD R: run ospf A: add interfaces D: discover for Router to become a NEIGHBOR >> TAN MAT T: timers A: area #number N: network address M: MTU A: authentication(pw) T: OSPF network type
Danke Keith! Ich habe es endlich ein bisschen verstanden :D Jetzt heißt es üben. :) / Thanks Keith! I finally understood it a bit :D Now it's time to practice. :)
Been catching up on your videos from last Yeae and you have a fun way of teaching, I hope you'll get to touch on bgp because and mpls if you haven't, I look forward to these ones
Keith, thank you so much for your tutorials and videos! It really helps me to improve my network knowledge at all. I still have a question, not regarding to OSPF: I was looking to dive in into SDN and some people recommended me if I want to build a bigger network, I should use MPLS as underlying “backend” in order to make traffic engineering easier (RSVP). Have you already made a video about this topic or similar here (or on CBT)? I would really appreciate it.
Thank you Tom S.. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord Thanks again Tom S.!
Thank you Stewie Griffin for the suggestion. Currently I am focusing most of my TH-cam content at the Cisco CCNA level, but will keep your suggestion in the queue as a possibility in the future. Thanks again for the idea.
Thank you for the question Brighton Skiyi. I don't have all the videos in any specific order, but checkout the CCNA playlists on my channel, and happy studies.
Hi, just found this channel. This was a really great video! I got a question though: Instead of activating ospf on the interface via the network - wildcard mask syntax. You can do "ip ospf 7 area 0" on every interface and achieve the same result right? Is this a valid alternative?
Thank you Joseph Martin. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord Thanks again Joseph Martin!
0.0.0.0 0.0.0.0 is typically how you would create a default route. The first four zeros is saying any destination network in the IPv4 address space, the second set of zeros is the wildcard mask saying you don't care about matching any number in each octet. in 0.0.0.0 255.255.255.255 the first four zeros is also saying any destination network in the IPv4 address space BUT the 255.255.255.255 is the wildcard mask that says to match each octet in the destination you just mentioned (the exact address of 0.0.0.0).
Dear Sir, please make life easy for beginners like me. I am finding it difficult to work on packet tracer 7.3 version. I hope you will give me solution. Twice I uninstalled and reinstalled but find it difficult to login again after the laptop again restarts from sleep or hibernate mode.
Thank you Santosh Hukkerikar. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord Thanks again Santosh Hukkerikar!
Keith said to remember OSPF Neighbors need to match and the acronym TANMAT helps
T-Timers
A-Area
N-Network Address
M-MTU
A-Authentication
T-Type (Network Type)
And THIS is why I always watch Keith Barkers channel.
No need to go to the market to get OSPF tutorials or tips, while Keith is here👏👏👍
Oh yeah anything from Keith Barker and Kevin Wallace, expect the quality to be on point.
Thank you! I needed this because I might forget when I do not use it. Your contribution to the IT community is priceless. Hope you still have the energy & means to keep on doing this.
You are so welcome!
Thank you Keith, you helped me understand this ospf single area so quick and well.
Happy to do it, thanks for the feedback @r-archieg3146.
I'm loving this "new" series already!
Thank you Omari R!
Thanks for that
More sessions like those please
That was the 1st in months
Keith is awesome isn't he !
OSPF
for Router to enable OSPF >>RAD
R: run ospf
A: add interfaces
D: discover
for Router to become a NEIGHBOR >> TAN MAT
T: timers
A: area #number
N: network address
M: MTU
A: authentication(pw)
T: OSPF network type
Thanks for all your videos, they are super helpful. Also, love the Celine Dion reference! :D
Thank you @leniotsiou!
Danke Keith! Ich habe es endlich ein bisschen verstanden :D Jetzt heißt es üben. :) / Thanks Keith! I finally understood it a bit :D Now it's time to practice. :)
Danke Kevin Hartwig!
Nice Explanation Keith... WoW...
Thank you very much Keith!!
Happy to do it, thanks for the feedback @evelc6988.
Great tutorial on OSPF. Well paced. Thank you Keith.
Happy to do it, thanks for the feedback T G.
Love this video. Thanks, Keith!
Thanks a lot for your content you help me out a lot!!
Happy to help!
thanks Keith
@Keith you are the best
Thank you George Mavimbela!
Thank you Keith 🎉
The OG for real 🎉
Thank you Izoka 182!
Is the Live hour at 10 am here or on Discord?
Been catching up on your videos from last Yeae and you have a fun way of teaching, I hope you'll get to touch on bgp because and mpls if you haven't, I look forward to these ones
Thank you Keshi!
This is wonderful! Thank you! Keep it going! By the way your hashtags splitted, no spaces in hashtags.. .
Oh thank you!
Keith, thank you so much for your tutorials and videos! It really helps me to improve my network knowledge at all. I still have a question, not regarding to OSPF: I was looking to dive in into SDN and some people recommended me if I want to build a bigger network, I should use MPLS as underlying “backend” in order to make traffic engineering easier (RSVP). Have you already made a video about this topic or similar here (or on CBT)? I would really appreciate it.
Thank you Tom S.. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord
Thanks again Tom S.!
nice video. When will you get a new series on Palo Alto? Also, Fortinet NSE4 is a nice topic.
Thank you Stewie Griffin for the suggestion. Currently I am focusing most of my TH-cam content at the Cisco CCNA level, but will keep your suggestion in the queue as a possibility in the future. Thanks again for the idea.
Keith your t-shirts 😂😂😂
Thank you
Welcome!
Bravo!
Thank you Caravanplus!
Good jobs men, thanks
Great!
Thank you ITSystemsAdmin!
Great great
excellent teaching that every dumb (me) can easily grab lessons
Kieth im new here how can i access your first tutorials
Thank you for the question Brighton Skiyi. I don't have all the videos in any specific order, but checkout the CCNA playlists on my channel, and happy studies.
Hi, just found this channel. This was a really great video! I got a question though:
Instead of activating ospf on the interface via the network - wildcard mask syntax. You can do "ip ospf 7 area 0" on every interface and achieve the same result right? Is this a valid alternative?
Thank you for the question Pontus Åberg. Yes, enabling on the interface is also a valid option. Both ways work.
Hey keith my upvote from the Livestream is still persistent on this vid.
Woow
This is crucial for CCNA test
Many thanks keith
Like the accronyms
It will be a great help
Do you share your packet tracer file?
Do we have to add the loopback address for the client to reach the server?
Thank you Joseph Martin. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord
Thanks again Joseph Martin!
Thanks, will do!
Hello! newbie here! what is the difference between 0.0.0.0 0.0.0.0 and 0.0.0.0 255.255.255.255 ?
0.0.0.0 0.0.0.0 is typically how you would create a default route. The first four zeros is saying any destination network in the IPv4 address space, the second set of zeros is the wildcard mask saying you don't care about matching any number in each octet. in 0.0.0.0 255.255.255.255 the first four zeros is also saying any destination network in the IPv4 address space BUT the 255.255.255.255 is the wildcard mask that says to match each octet in the destination you just mentioned (the exact address of 0.0.0.0).
@@NetworkBruh alright got it! Many thanks to you bro!
My dream to have home office like you. Save 3% towards that.
Way to commit to your goal Zadkiel Addae❗ You can do this.
You forgot to upload the edited ospf quiz?
Thank you Comedy Trends KE, here it is: th-cam.com/video/E_Lw2MWIZH8/w-d-xo.html
Dear Sir, please make life easy for beginners like me. I am finding it difficult to work on packet tracer 7.3 version. I hope you will give me solution. Twice I uninstalled and reinstalled but find it difficult to login again after the laptop again restarts from sleep or hibernate mode.
Thank you Santosh Hukkerikar. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord
Thanks again Santosh Hukkerikar!
Awesome
Thank you juliano resende!
Anyone has last week's quiz
🙏🏿🙏🏿🙏🏿📖🧠
Thank you