Hi Bishwas, This whole series has been a great help! I am working in wireless EV charging domain and your videos are my basic learning tools. Kudoos! Cheers to you!
Brother you are super, want that you should do some project,,,,,, or do simulation of some research paper in your channel, through this way your channel will grow up
@@viswashh because if you want to grow your channel... this is the best option to show the papr and dow the simulation of that paper... the student will get courage in this way and you will get a lot of subcriber...
Thank you very much, please, when you change the solution type to transient in Simplorer, did you keept the solution type of maxwell as magnetostatic or not?
hI Sir, Thank you for your great work, One Q plz, How u managed to obtain the values of uh in the L values at @20:04 Inductuncees, I am getting nh no matter which distance I test with. can you please help me, thank you.
ops I got it, the number of turns was similar to the one u were testing with and I totally forgot to test with my design, thanks anyways ur vids are very helpful.
I want to perform a sweep with different load values and see which load gives an optimal result. But in the magnetostatic analysis, I havent had the luck till now.
can you tell is changing distance between coil will change efficiency as self inductance will be constant for all distances so in my point of view efficiency will be constant.
Circuit simulation will take over once it is used. Maxwell model is just for parameter derivations. It has no play except that in circuit simulation. So you can name the current whatever you want. Its basically same thing.
Sir, could you please make a video in which wpt system takes into account the motion of the coil as well i.e the primary coil remains stationary and the secondary coil is in motion
This is something I have already covered in previous lessons. Where we do a change receiver's distance by using "parametric sweep" and generate data. Please refer to previous lessons. Thank you.
hi I am having this error, "Simplorer requires the source solution 'Setup1 : LastAdaptive' to have a frequency sweep of at least '20' points". The frequency I am using is 2.5 kHZ. Plz help!
I had the same error. Then I changed my Maxwell model solution type from 'Eddy Current' to 'Magnetostatic' (Right click to 'Maxwell 3DDesign (Eddycurrent) --> Solution Type). The problem has been solved. Don't forget to change SubCircuit as well.
Excellent tutorials Bishwas Basnet! Watched with a pleasure. Man, could you please advise, I want to excite 4-coil WPT. Resonant coils suppose to be connected to the corresponding capacitors. To connect them in circuit I should choose Add Excitation => Current or Coil terminal? Just Coil terminal seems to be correct
Thank you so much for your feedback. I am glad that you liked it. For your problem can you tell me diagrammatically so that I can understand it better? Please email: bishwasbasnet2017@gmail.com
HI Bishwas, Thank you very much for your video, but I have finished analyzing the simplorer, but the result is always not running, has anyone encountered this problem, is it because I am not using Twin Builder? The frequency I use is 100KHZ
Thank you teacher. You are very friendly and instructive. You helped me a lot with my studies. Healthy and happy lives.
Hi Bishwas, This whole series has been a great help! I am working in wireless EV charging domain and your videos are my basic learning tools. Kudoos! Cheers to you!
Thank you so much. Means a lot to me. Good luck in your endeavors.
Thank you so much, brother. Personally, I can say it was very helpful for me.
That means a lot. Thank you so much for your kind words.
Brother you are super, want that you should do some project,,,,,, or do simulation of some research paper in your channel, through this way your channel will grow up
Thank you brother. Will definitely think about your suggestion. Keep supporting and have a great time.
@@viswashh because if you want to grow your channel... this is the best option to show the papr and dow the simulation of that paper... the student will get courage in this way and you will get a lot of subcriber...
Thank you so much
Thank you so much. Nice Tutorial.
I am glad that you liked it. Please do not forget to subscribe for future updates.
@@viswashh sir, source should be ac...u r taking dc source
Thank u this is great help to me
I am glad that it helped.
amazing video please do more videos on this area
Thank you and surely will be uploading soon.
great videos
Thank you very much, please, when you change the solution type to transient in Simplorer, did you keept the solution type of maxwell as magnetostatic or not?
Yes. It's magnetostatic only.
Thank you so much and it was amazing. Will you make any video regarding full system simulation on Simplorer ?
Great to know that. Right now I don't have plans but let's see how it goes.
hI Sir,
Thank you for your great work, One Q plz, How u managed to obtain the values of uh in the L values at @20:04 Inductuncees, I am getting nh no matter which distance I test with. can you please help me, thank you.
ops I got it, the number of turns was similar to the one u were testing with and I totally forgot to test with my design, thanks anyways ur vids are very helpful.
I want to perform a sweep with different load values and see which load gives an optimal result. But in the magnetostatic analysis, I havent had the luck till now.
If you are talking about parameterizing load itself then you shall do it in Simplorer and keep load as a global variable.
Can we see the magnetic field distribution with circuit simulation?
can you tell is changing distance between coil will change efficiency as self inductance will be constant for all distances so in my point of view efficiency will be constant.
Thats correct, it's the mutual inductance/coupling factor we are concerned with.
Hi Sir, When using Simplorer simulation, the coil current is the circuit current or excitation current. I do not understand this point?
Circuit simulation will take over once it is used. Maxwell model is just for parameter derivations. It has no play except that in circuit simulation. So you can name the current whatever you want. Its basically same thing.
Sir, could you please make a video in which wpt system takes into account the motion of the coil as well i.e the primary coil remains stationary and the secondary coil is in motion
This is something I have already covered in previous lessons. Where we do a change receiver's distance by using "parametric sweep" and generate data. Please refer to previous lessons. Thank you.
hi sir,Thank you for video,I made a design in Simplorer but there is something wrong with the design and I don't know what it is. Can you help me?
Thank you so much 🌸
But I need Video explaining how I can installing the Ansys electronics
Unfortunately, you need to figure it out on your own.
dear teacher, I want to know why I don't have the current project in the subcircut---maxwell component---add dynamic magnetostatic?
I also want to ask questions regarding the simulation of WPT
Sure. Feel free to reach out to me on my email.
yeah...i will share
hi
I am having this error, "Simplorer requires the source solution 'Setup1 : LastAdaptive' to have a frequency sweep of at least '20' points". The frequency I am using is 2.5 kHZ. Plz help!
I had the same error. Then I changed my Maxwell model solution type from 'Eddy Current' to 'Magnetostatic' (Right click to 'Maxwell 3DDesign (Eddycurrent) --> Solution Type). The problem has been solved. Don't forget to change SubCircuit as well.
@@ceryanc9984 I solved the issue in Eddy Current Solution. In the solver tab you have to put a frequency sweep of atleast 20 points (20 frequencies).
Excellent tutorials Bishwas Basnet! Watched with a pleasure. Man, could you please advise, I want to excite 4-coil WPT. Resonant coils suppose to be connected to the corresponding capacitors. To connect them in circuit I should choose Add Excitation => Current or Coil terminal? Just Coil terminal seems to be correct
Thank you so much for your feedback. I am glad that you liked it. For your problem can you tell me diagrammatically so that I can understand it better?
Please email: bishwasbasnet2017@gmail.com
@@viswashh I have sent the mail))) Please review. Help me sir 🙂
why use 6.67 Mhz frequency? Is it because we want it that or why?
It is one of the ISM band frequencies but anyway its a choice.
HI Bishwas, Thank you very much for your video, but I have finished analyzing the simplorer, but the result is always not running, has anyone encountered this problem, is it because I am not using Twin Builder? The frequency I use is 100KHZ
Hi, I do not think I understand your problem statement quite well.
There is no Twin Builder in my program. How can I add it? (It's not cracked, I use which one is for students.)
The student version might not have everything. Please proceed to the cracked version in case there are no other means.
Full Playlist of this series: lnkd.in/ga6sp8a