Error EC20 Part 2 With 8" Vertical Screen (previous model) Redline Embroidery Machines

In this video shows everything related with EC20 Error in Embroidery Machine.
For more information about the Redline Embroidery Machine please visit www.redline1501.com/
For thread you go at metroemb.com

[@DenaliEmbroideries]

I checked everything you told in the video. I had some a fresh look at my machine, and a broken wire started working. Add it to your condition and results.

[@cafengalapi]

Where is the stop position sensor located on the double head machine?

[@JeanGoulart]

Congratulations on the videos. Do you have a video showing how to change the 2:48 time mail?

[@chitraselvam422]

My machine shows generatix overvoltage error even at a 214volt along with main motor timeout error any suggestion pls

[@isayc2208]

Do you have a video for EC19 error, please?

[@SunilKumar-bz7hh]

Hey Can you please post the video of changing the main motor?

[@user-ly1zu9kf5s]

What could be the problem if such an error not at startup, but after a few minutes of working.

[@findel4]

Possible the stop position sensor.

[@kamelchikhabelgacem5502]

I have problem the machine not stop postion 100° just 104° what is the problem ???

[@RedlineEMB]

It cloud be the stop position sensor not working properly or the notch of the stop position sensor metal disk is not properly calibrated .
With a clean qutip clean the stop position sensor to see if this fixes the issue if not verified the notch of the metal disk to see is between the 2 magnets of the sensor and the main shaft at 100 degree. if not calibrate the disk.

[@kamelchikhabelgacem5502]

@@RedlineEMB Sensor stops in the notch completely

[@kamelchikhabelgacem5502]

@@RedlineEMB i have problem axis main sheft not stop 100°

[@kamelchikhabelgacem5502]

@@RedlineEMB Machine pointer is incorrect 104 °

[@kamelchikhabelgacem5502]

I think problem in the encoder : .(