Used Solar Panels: shorturl.at/swyGL New Solar Panels: shorturl.at/fPW27 Victron MPPT: shorturl.at/tuAEQ Powerqueen MPPT : amzn.to/4aNwjem Watt Power Meter: amzn.to/3ww8x6L
Bought my used 250 watt panels 3 years ago. They were 30 bucks ea.. they have been running like clockwork ever since. Producing at least 105% of rated power for at least 5 hours a day when the sun shines.
I live just west of the Phoenix metro, so Santan is about an hour away. Out here, a lot of people have used panels from Santan and everyone loves them. Generally speaking, the used panels function within new specifications. I'm installing a bunch right now.
Solar MPPT contollers vary on their power point. Your test would be more conclusive if you had used the Victron for both panels rather than throwing in the variable of the other MPPT controller. San Tan has great prices but it's the freight that kills the deal.
Your videos are some of the best solar videos on YT! At $30 a panel for the used instead of bi-facials you could just put the $30 ones back to back and and still be cheaper and get both sides!
From what I’ve learned in assessing used panels, it makes sense to buy 200% of your needs. Say you need 1kW you buy 2kW, put 500W in storage as spares. Set up your 1.5kW worth of panels and your charge controller will perform well on far from ideal days because of the larger redundant array. You couldn’t do that at new prices. Of course you need to observe open circuit voltages, de rate for your winter temps and make sure that doesn’t exceed your charge controller’s voltage limit.
New is good if you get some credits/rebates. Old generally are fine as long as the panel is not damaged - no snail trails, burns on back or cracked glass etc otherwise degradation per year is pretty small like 1% per year or something. The only issue would be you shouldn't mix and match panels so if an array is damaged by hail etc then you need to replace the lot on that string, unless you using micro inverters then its doesn't matter each one is contributing AC back to the grid. The only time one might look at new is for full install not DIY or as you say looking at new technology bifacial or newer panels have significantly better performance per area (though these days panels are sold to unsuspecting customers on being higher powered when in reality they are just bigger panels). I got a load of them for off grid and also replace a 18month string damaged by hail and they were second hand and actually higher rated panels. Higher output on panels is due to temp on the panel the closer or to 25c or lower the panel will produce more power - though have to be careful as the voltage and amps go up from memory in cold weather and in cloud edge effect that you had.
My used jinkos were 315w and they'll definitely hit it. They are over 5 years old now. I think these things only lose 1% per year so it'll take a decade to actually notice a performance issue vs seasonal fluctuations.
I bought 2 used Trina 250w panels for my off grid shed. I have them on a renogy rover 40amp mppt 12v. I usually see 380-450 watts depending on temperature outside in full sun around noon. I paid $120 them and honestly I'd do it again. I also have 6 renogy 100 watt panels ok the same controller and I see 500-550 most of the time. During partly cloudy weather I will see 550-650 watts during cloud edge effect. On my array I made including 12 of those renogy 100 watt panels I observed 1450 watt peak and average 1250 during cold temperatures. From 12-2pm. Very please with used panels. You do have to watch out for the corroded bus bars. Those will catch fire. I looked through the stack before buying mine. I was hapoy to see you tested each panel separately while not hooked to the battery at the same time. Better results. Also the panels should be under a load (charging for about 15 minutes before taking peak power measurements but honestly it's not much of a difference with a 500 or less system. Anything above 500 watts if it's crucial then a hot panel test is nice to have the information from vs the cold panel test. Nice job and thank you for the video!
@Tokyo1991.JL1AJE they were 10 years old supposedly and I have had then for 2 years. I'll see if I can find a date code or use the serial numbers to find out. In curious now myself lol. You can do a open circuit test and short circuit test in full sun to find out thier output. Just connect the negative and positive and use a DC amp clamp. If the isc is (example) 10 amps and you measure 9 amps at rated temperature then it's got 90% life left. Hope this helps for testing before buying! Also trinas you need to inspect the bus bars for corrosion. It'll be green. :)
Hey thanks for the detailed reply. The panels I’m looking at are about that old. Do Trina panels suffer from snail trails? Thanks for the heads up on the corrosion. Another tip: I take the spec Open Voltage x Short Current and compare that to the spec MPP to give me an expected performance value (0.76 for the panels I’m looking at). When you test you multiply the OCV x CCI x 0.76 to get your guesstimated power. I’ll add as well it’s worth having a known working panel on hand (I have a 50W panel) so you can gauge the actual ‘solar performance’ on the day you’re testing panels. Say you only see 40W out of your 50W good panel then what ever panel you test you could expect to see an extra 25% on a good day. The weather is far from ideal for testing as we are in the humid rainy season before summer unleashes itself. Hopefully I can snag enough to give me 1.5kW and start some serious tinkering :)
@Tokyo1991.JL1AJE absolutely and thanks! With used panels, overpaneling is a good idea lol. They are known for snail trails but only early on. So if they don't have them then your pretty much safe lol.
lol, every time I try and do a solar video, the clouds come out 😆 I have panels that I bought nearly 25 years ago and they are still working fine. The panels on my cabin have been running since 2008 when I put them into service and they are still running great, there is a lot to be said with using old panels Vs buying new ones. I think now-a-days people want perfection, they want everything new and perfect and pay a fist full of money tying to achieve it.
Unsure, but the temperature of the solar panel also affects the output... with rain, and shade, could one (the old one) have been cooler just before the test?
Your video made my day! It made me realise that we don’t necessarily get screwed over on everything we buy here in Australia. (We’re so used to seeing things much cheaper in the US) I can buy Trina Solar 510W Mono crystalline panels brand new for $118 AUD ($77 USD) It was a great video and I’m curious as to what the panel temperature was during your test.
Wow, that's amazing you can get them for that price. I thought the $180 for a 300 watt new panel was even pretty good. Maybe because your closer to China? 🤷♂️. The temp was around 50 degrees fahrenheit. What part of Australia do you live? I lived in Brisbane, ipswich and mackay for a couple of years.
It's safe to assume that you've lost half a decade of use by buying secondhand - that alone justifies the price. If you live in Texas it is highly unlikely that those panels will last another five years and it is for this reason solar installers go bust and or change their name so they don't have to honor the so-called 20 year 'guarantee'. I am on my third set of good rigid panels and I did my own install from the get-go as I am a retired power production specialist for the federal government.
Thanks for the comment, it's a good point that I did lose 5 years out of these panels. Because they are performing the same as the new panels I'm not too concerned . down the road that could change though . Who knows. Have you found that hotter weather is pretty hard on your panels? 3rd set? Wow, that's crazy!
I do not know your email address but in the morning I plan on ordering 10 of the 424 watt used panels if I can get the free shipping. Thank you for the help came at a perfect time.
Nice, my email is in the description and I also have a discount code that might also save you some money. I'm not sure if it still works but it's worth a try... good luck!
Just running some quick numbers in my head you would need 700 watts of solar and a 12 volt 200 amp hour lfp battery... sunny conditions. It will give you a little bit of room to expand...imo.
Nice! Not in the market now though. I did look at Santan at the time and they couldn't compete. I got a pallet of 400/500 bifacial panels to the door for $110 ea with a new warranty in place. I'm not opposed to used panels at all but it all comes down to price at the end. I'm seeing some good deals lately on solar equipment. It pays to do your due diligence shopping and hound out the deals. The economy sux and people aren't spending and sellers are trying to sell. It's a little crazy out there.
That's not their published price on the website. I made a good sized order along with the panels. Not being so comfortable with placing orders like that on a website I called and went through sales. After discounts and next to no shipping and a few freebies...... They did right by me straight up! Don't mind throwing them a bone at all. Signature Solar...... They're now doing some free shipping and by backs on inverter panels that can't be passed up at the moment. Just a happy customer brother!
@@beebop9808 That's a good point.. if you're going to buy a large package that is all bundled together... Depending on the price it may be best to buy new in that scenario.
@@diySolarPowerFunWithRay I wish I would’ve kept mine. I sold it be because I figured that I didn’t need to be riding and possibly getting injured as a new father. Now I ride an XR650R🤣
Sent an solar is where I bought mine. I believe they are the largest supplier in the United States for used panels. www.santansolar.com/?ref=DiySolarPowerFun&campaign=AreBuyingUsedSolarPanelsWorthTheMoney
@@diySolarPowerFunWithRay I'm referring to the partly sunny test when the used panel got significantly more. The Power Queen MPPT just seems to have a superior max power point algorithm when compared to the Victron. There can not be any other explanation for that large difference 142Wh vs 114Wh.
I got 3000 watt growatt and 200ah 24 v lifepo4 battary no panels yet. I really trying to find a clear understanding of how lomg the battery will power a 5amp fridge. I was told it would only last 1.5 hours roughly its hard for me to grasp that idea please need some understanding
5 Amp X 120V is 600W so your fridge is not quite as energy efficient by todays standards. Mine doesn't go over 2.5 amps and its a huge LG fridge/freezer. With that said, a single 190Ah lifepo4 is perfect for my use. The fridge has never shut down due to lacking power for about two years so far. Try doubling your battery capacity or opt for a more efficient, newer model fridge. My fridge is outside in open air, not in a hot garage so I don't have to combat an extra 300 watts of heat output turning on the AC. So a 600 watt fridge will cancel out a 5,000 BTU window AC if you're trying to cool the living space with the fridge. A lot of people don't understand that having an older fridge is akin to throwing cash out the window with the current energy rates. After a year of runtime the EXTRA allotment on your power bill would have most likely paid for the extra lifepo4 battery - albeit, a used one.
You are comparing Jinko to Canadian Solar panels. I feel the Jinko panels are better made than the Canadian Solar is why the very comparable results. The comparison to be fair should have been same make and model of panels rather than from companies far apart.
Damn you get screwed over there for some foil/foil panels that will disintegrate at around 12 years. Here in germany I got the Trina vertex s+ 435 bifacial glas/glas for 75€ / panel (new)
@@diySolarPowerFunWithRay Here are so many chinese panels for under 70€ nearly everywhere to buy, this is nice for the end user, but this is the reason why solar producers are turning their back on germany and the EU.
Used Solar Panels: shorturl.at/swyGL
New Solar Panels: shorturl.at/fPW27
Victron MPPT: shorturl.at/tuAEQ
Powerqueen MPPT : amzn.to/4aNwjem
Watt Power Meter: amzn.to/3ww8x6L
Thank you. My comment was for Beebop.
Bought my used 250 watt panels 3 years ago. They were 30 bucks ea.. they have been running like clockwork ever since. Producing at least 105% of rated power for at least 5 hours a day when the sun shines.
What do you think about the fact that a new 315W solar panel costs 49€ (about the same amount of USD) and is really unused...
@MR-ub6sq in Europe panels are much more affordable. If it is used, you will definitely be able to tell. Water marks etc.
I live just west of the Phoenix metro, so Santan is about an hour away. Out here, a lot of people have used panels from Santan and everyone loves them. Generally speaking, the used panels function within new specifications. I'm installing a bunch right now.
Solar MPPT contollers vary on their power point. Your test would be more conclusive if you had used the Victron for both panels rather than throwing in the variable of the other MPPT controller. San Tan has great prices but it's the freight that kills the deal.
I accounted for this in the test.
Your videos are some of the best solar videos on YT! At $30 a panel for the used instead of bi-facials you could just put the $30 ones back to back and and still be cheaper and get both sides!
Lol! That's a good point!
@@diySolarPowerFunWithRay I smell a new video idea.....do a test with a couple of panels .....I dare you!!!!
They will overheat@@callmebigpapa
I like the way you're thinking.
If you leave a gap i think they might work out.
Even if there is a slight loss from used panels, for most applications the only thing that matters is the $/watt
The sun is reflected from the ground and bounces back off the clouds. This was observed in solar car races in the 90s.
Nice, that actually makes a lot of sense!
From what I’ve learned in assessing used panels, it makes sense to buy 200% of your needs. Say you need 1kW you buy 2kW, put 500W in storage as spares. Set up your 1.5kW worth of panels and your charge controller will perform well on far from ideal days because of the larger redundant array.
You couldn’t do that at new prices.
Of course you need to observe open circuit voltages, de rate for your winter temps and make sure that doesn’t exceed your charge controller’s voltage limit.
New is good if you get some credits/rebates. Old generally are fine as long as the panel is not damaged - no snail trails, burns on back or cracked glass etc otherwise degradation per year is pretty small like 1% per year or something. The only issue would be you shouldn't mix and match panels so if an array is damaged by hail etc then you need to replace the lot on that string, unless you using micro inverters then its doesn't matter each one is contributing AC back to the grid. The only time one might look at new is for full install not DIY or as you say looking at new technology bifacial or newer panels have significantly better performance per area (though these days panels are sold to unsuspecting customers on being higher powered when in reality they are just bigger panels). I got a load of them for off grid and also replace a 18month string damaged by hail and they were second hand and actually higher rated panels. Higher output on panels is due to temp on the panel the closer or to 25c or lower the panel will produce more power - though have to be careful as the voltage and amps go up from memory in cold weather and in cloud edge effect that you had.
My used jinkos were 315w and they'll definitely hit it. They are over 5 years old now. I think these things only lose 1% per year so it'll take a decade to actually notice a performance issue vs seasonal fluctuations.
I bought 2 used Trina 250w panels for my off grid shed. I have them on a renogy rover 40amp mppt 12v. I usually see 380-450 watts depending on temperature outside in full sun around noon. I paid $120 them and honestly I'd do it again. I also have 6 renogy 100 watt panels ok the same controller and I see 500-550 most of the time. During partly cloudy weather I will see 550-650 watts during cloud edge effect. On my array I made including 12 of those renogy 100 watt panels I observed 1450 watt peak and average 1250 during cold temperatures. From 12-2pm. Very please with used panels. You do have to watch out for the corroded bus bars. Those will catch fire. I looked through the stack before buying mine. I was hapoy to see you tested each panel separately while not hooked to the battery at the same time. Better results. Also the panels should be under a load (charging for about 15 minutes before taking peak power measurements but honestly it's not much of a difference with a 500 or less system. Anything above 500 watts if it's crucial then a hot panel test is nice to have the information from vs the cold panel test. Nice job and thank you for the video!
thanks!
I’d be interested to hear how old your Trina panels are. I found a local source and would like to gauge the expected performance drop.
@Tokyo1991.JL1AJE they were 10 years old supposedly and I have had then for 2 years. I'll see if I can find a date code or use the serial numbers to find out. In curious now myself lol. You can do a open circuit test and short circuit test in full sun to find out thier output. Just connect the negative and positive and use a DC amp clamp. If the isc is (example) 10 amps and you measure 9 amps at rated temperature then it's got 90% life left. Hope this helps for testing before buying! Also trinas you need to inspect the bus bars for corrosion. It'll be green. :)
Hey thanks for the detailed reply. The panels I’m looking at are about that old.
Do Trina panels suffer from snail trails? Thanks for the heads up on the corrosion.
Another tip: I take the spec Open Voltage x Short Current and compare that to the spec MPP to give me an expected performance value (0.76 for the panels I’m looking at).
When you test you multiply the OCV x CCI x 0.76 to get your guesstimated power.
I’ll add as well it’s worth having a known working panel on hand (I have a 50W panel) so you can gauge the actual ‘solar performance’ on the day you’re testing panels.
Say you only see 40W out of your 50W good panel then what ever panel you test you could expect to see an extra 25% on a good day.
The weather is far from ideal for testing as we are in the humid rainy season before summer unleashes itself.
Hopefully I can snag enough to give me 1.5kW and start some serious tinkering :)
@Tokyo1991.JL1AJE absolutely and thanks! With used panels, overpaneling is a good idea lol. They are known for snail trails but only early on. So if they don't have them then your pretty much safe lol.
lol, every time I try and do a solar video, the clouds come out 😆
I have panels that I bought nearly 25 years ago and they are still working fine. The panels on my cabin have been running since 2008 when I put them into service and they are still running great, there is a lot to be said with using old panels Vs buying new ones. I think now-a-days people want perfection, they want everything new and perfect and pay a fist full of money tying to achieve it.
25 year old panels and still going. That's awesome!
the catch is with santan solar the minimum to buy is 10 panels so you have to spend a lot of money at once usually. At least that's what I've seen
That's true. If you live close to their location I think they might sell smaller quantities. If you're willing to pick them up
What if that 325 watt module only produces 50 watts?
@@raygibson1295 right!
@@raygibson1295 they will refund you
The right one, newer one, looks less effective because of larger bezels, and smaller angle to the sun
Interesting... Thanks. I'll have to look at those cell a 2nd time.
I totally concur.
Unsure, but the temperature of the solar panel also affects the output... with rain, and shade, could one (the old one) have been cooler just before the test?
Interesting test! I always go for the panels that are the best value.
Your video made my day!
It made me realise that we don’t necessarily get screwed over on everything we buy here in Australia.
(We’re so used to seeing things much cheaper in the US)
I can buy Trina Solar 510W Mono crystalline panels brand new for $118 AUD ($77 USD)
It was a great video and I’m curious as to what the panel temperature was during your test.
Wow, that's amazing you can get them for that price. I thought the $180 for a 300 watt new panel was even pretty good. Maybe because your closer to China? 🤷♂️. The temp was around 50 degrees fahrenheit. What part of Australia do you live? I lived in Brisbane, ipswich and mackay for a couple of years.
I want to know where you’re buying those I’m in Aus
@@TheCrunky88Tradezone
It's safe to assume that you've lost half a decade of use by buying secondhand - that alone justifies the price. If you live in Texas it is highly unlikely that those panels will last another five years and it is for this reason solar installers go bust and or change their name so they don't have to honor the so-called 20 year 'guarantee'. I am on my third set of good rigid panels and I did my own install from the get-go as I am a retired power production specialist for the federal government.
Thanks for the comment, it's a good point that I did lose 5 years out of these panels. Because they are performing the same as the new panels I'm not too concerned . down the road that could change though . Who knows. Have you found that hotter weather is pretty hard on your panels? 3rd set? Wow, that's crazy!
I have 180 watt solar panel from boug RV and mine has put out over 200 Watts several times. So I think it's common if you have a good panel
I do not know your email address but in the morning I plan on ordering 10 of the 424 watt used panels if I can get the free shipping. Thank you for the help came at a perfect time.
Nice, my email is in the description and I also have a discount code that might also save you some money. I'm not sure if it still works but it's worth a try... good luck!
Email me your order number and you'll probably win the raffle next week.
I just got new 56 JinKo 445W panels each 95EUR, I don't understand why prices in US are still so high.
Tariffs
IIRC, used bifacial panels were out of stock last week - but I'm sure that could change at a moments notice.
Is the protective film still covering the LCD display on your power analyzers? if so, it's done its job and needs to come off.
Very good information. Thank you for the video.
Love your4 vids need your advice.. I'm running 5 miners total of 1000 watts running 24-7.. What would you suggest. Thanks...
Just running some quick numbers in my head you would need 700 watts of solar and a 12 volt 200 amp hour lfp battery... sunny conditions. It will give you a little bit of room to expand...imo.
@@diySolarPowerFunWithRay he's gonna need way more than that in both batteries and panels, at least try doubling it.
Nice!
Not in the market now though. I did look at Santan at the time and they couldn't compete. I got a pallet of 400/500 bifacial panels to the door for $110 ea with a new warranty in place. I'm not opposed to used panels at all but it all comes down to price at the end. I'm seeing some good deals lately on solar equipment. It pays to do your due diligence shopping and hound out the deals. The economy sux and people aren't spending and sellers are trying to sell. It's a little crazy out there.
500 watt New bifacials for $110? Wow. Where at?
It would be great if you would name your sources or even better if you could supply links. Thanks!
That's not their published price on the website. I made a good sized order along with the panels. Not being so comfortable with placing orders like that on a website I called and went through sales. After discounts and next to no shipping and a few freebies...... They did right by me straight up! Don't mind throwing them a bone at all.
Signature Solar...... They're now doing some free shipping and by backs on inverter panels that can't be passed up at the moment.
Just a happy customer brother!
@@beebop9808 That's a good point.. if you're going to buy a large package that is all bundled together... Depending on the price it may be best to buy new in that scenario.
Great content thank you
Love this test, thanks for sharing Ray.
5 years old isnt that old when most panels are rated for 25yrs. All the old ones i found for cheap are 20yrs
Minimum purchase amount for the raffle? I have a small order that I can buy from Santan.
No minimum. 👍
Why not use the second hand panel for the shed
I'm gonna use it for the shed.
How about that 400EX! I remember those days!
Yup. I love that thing!
@@diySolarPowerFunWithRay I wish I would’ve kept mine. I sold it be because I figured that I didn’t need to be riding and possibly getting injured as a new father. Now I ride an XR650R🤣
7:24 look, photovoltaic cells don't crank up power of anything
What are the names of the meters that you’re using please? Is there an Amazon link?
Thanks for pointing this out: Here's the link: amzn.to/3ww8x6L
@@diySolarPowerFunWithRay thank you!
Where can I buy used solar panels
Sent an solar is where I bought mine. I believe they are the largest supplier in the United States for used panels. www.santansolar.com/?ref=DiySolarPowerFun&campaign=AreBuyingUsedSolarPanelsWorthTheMoney
Yes most likely the difference was due to the MPPT.
I accounted for that
@@diySolarPowerFunWithRay I'm referring to the partly sunny test when the used panel got significantly more. The Power Queen MPPT just seems to have a superior max power point algorithm when compared to the Victron. There can not be any other explanation for that large difference 142Wh vs 114Wh.
@@electrodacus Yeah, that's a good point.
Your not screwed. The new ones have an output warranty. Used ones dont.
I got 3000 watt growatt and 200ah 24 v lifepo4 battary no panels yet.
I really trying to find a clear understanding of how lomg the battery will power a 5amp fridge.
I was told it would only last 1.5 hours roughly its hard for me to grasp that idea please need some understanding
Yeah, Fridges are a little more tricky to estimate. I made a video on this exact subject though :) th-cam.com/video/z1T-liUaPQ4/w-d-xo.html
5 Amp X 120V is 600W so your fridge is not quite as energy efficient by todays standards. Mine doesn't go over 2.5 amps and its a huge LG fridge/freezer. With that said, a single 190Ah lifepo4 is perfect for my use. The fridge has never shut down due to lacking power for about two years so far. Try doubling your battery capacity or opt for a more efficient, newer model fridge. My fridge is outside in open air, not in a hot garage so I don't have to combat an extra 300 watts of heat output turning on the AC. So a 600 watt fridge will cancel out a 5,000 BTU window AC if you're trying to cool the living space with the fridge. A lot of people don't understand that having an older fridge is akin to throwing cash out the window with the current energy rates. After a year of runtime the EXTRA allotment on your power bill would have most likely paid for the extra lifepo4 battery - albeit, a used one.
Do you have this type Used SunPower 420W Solar Panel i need 3
You can check in their site
My friend at work paid £7k for his system...last 3 months he got paid £700 into his bank...he showed me...he says he even generates power in moonlight
Yes, You guys have great prices on solar over there!
2:20 dude, your controllers and battery are outside in the rain
Yeah, I was trying to keep them covered, but they did get wet.
You are comparing Jinko to Canadian Solar panels. I feel the Jinko panels are better made than the Canadian Solar is why the very comparable results. The comparison to be fair should have been same make and model of panels rather than from companies far apart.
That would be best. I'd love to get a hold of a new jinko and a 5 yr old jinko of the same model.
try jinko n-type
Cool. Those look interesting
Damn you get screwed over there for some foil/foil panels that will disintegrate at around 12 years. Here in germany I got the Trina vertex s+ 435 bifacial glas/glas for 75€ / panel (new)
That's crazy. Where can you buy those at? We do get screwed over here in the US on solar prices.
@@diySolarPowerFunWithRay Here are so many chinese panels for under 70€ nearly everywhere to buy, this is nice for the end user, but this is the reason why solar producers are turning their back on germany and the EU.
Pretty sure that victron isnt waterproof