DIY Alfa Giulietta Android Head Unit, Camera Install ATOTO S8 Review, Can Bus Decoder Not Needed

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ธ.ค. 2024

ความคิดเห็น • 183

  • @arcgarage
    @arcgarage  5 หลายเดือนก่อน

    Make sure you get the BCM wiring diagram for your car, for the exact year and model. The pinout could be different to the BCM showed in the video.

    • @lodewijkh7395
      @lodewijkh7395 5 หลายเดือนก่อน

      Hey man I did exactly this and it Worked great. But now my car won’t run on on contact like the battery is dead. Only problem my battery isn’t dead….
      Any idea what could be wrong?

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน

      @@lodewijkh7395 Check the battery just in case. Also did you get the right wiring diagram for your car? Do Steering wheel buttons work?

    • @lodewijkh7395
      @lodewijkh7395 5 หลายเดือนก่อน

      @@arcgarage hey man Thnx for your response, I don’t have the buttons on the steering wheel. Only thing i did myself is pull power from the fusebox using one of those same connectors. For the 12v contact power. I put it on the exact same spot and used a 7.5 amp on both places for fuses.

    • @lodewijkh7395
      @lodewijkh7395 5 หลายเดือนก่อน

      And well not even thé lights show up on contact… I’m afraid i’ve totalled my car…

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน

      @@lodewijkh7395 Remove the piggy back fuse, and return it as it was, then check if contact works

  • @Goc67
    @Goc67 ปีที่แล้ว +11

    Brilliant step-by-step tutorial. If I ever by a Giulietta...

  • @UgurMuhtar
    @UgurMuhtar ปีที่แล้ว +3

    Extremely useful video thanks a lot!

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      You're welcome, thanks for support...

  • @shitos557
    @shitos557 ปีที่แล้ว +1

    Great video! Thanks!
    Just You didn't show how did you manage to pass the rear camera wires through the rear bumper. Could you please give me an idea how did you manage this as I'm struggling so much with this step

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      Thanks, I pulled the wires through number plate light, and guided the through the access hole in the body

  • @jota-cu
    @jota-cu 8 หลายเดือนก่อน +1

    Thank you for the tutorial and all the good explanations. As far as I understood from other comments, you kept the Blue&Me (BM) device to avoid any CAN bus proxi alignment or modifications. If this is the case, how did you recognize and connect the original external microphone? I understand this mic goes to the BM. The same for any original USB port that the car could have and you want to keep. Furthermore, are there any conflicts with the steering wheel buttons when you keep the BM? For instance, when you press the button located at left down in the left side of the steering wheel (the one of the BM voice), is it functioning for which you have customized it in the new radio or does it still works for BM purposes?

  • @woodcrestdragon
    @woodcrestdragon 10 หลายเดือนก่อน

    Great video! You've given me the courage to install my new Atoto headunit in my 2010 Giulietta.
    For wiring in the steering wheel buttons directly, could you link me to the pin diagram? That's the part I'm most scared about starting right now.

    • @arcgarage
      @arcgarage  10 หลายเดือนก่อน

      Thanks, send me the email, I don't have the link, but I do have some images

  • @pomodoro5913
    @pomodoro5913 ปีที่แล้ว

    Well done arc garage! Greetings from switzerland.

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Thank you, greetings

  • @riccardosemeraro9368
    @riccardosemeraro9368 2 หลายเดือนก่อน

    Where did you get the new dash trim?

  • @MkRy1990
    @MkRy1990 11 หลายเดือนก่อน

    Hello @arcgarage!
    My question will be a bit off topic. I would like to install a rear dash cam. Where did you run the cable of the rear camera from the Head unit until the rear light?
    Thanks!

    • @arcgarage
      @arcgarage  11 หลายเดือนก่อน

      Hi, mounted it on rear bumper, cable went through number plate light into the boot through wire access hole, there it is connected to few wires, and I ran it underneath the plastic trim all the way to the front

  • @FilippoGutierrez
    @FilippoGutierrez 9 หลายเดือนก่อน

    Hello! I don't have a swc gnd wire just the normal gnd wire. Would this trick work?

  • @Rzai2344
    @Rzai2344 ปีที่แล้ว

    Very detailed and great video
    How would i go about getting the climate control ac controls on the screen?
    I’d really appreciate any help here

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Not sure you can do that, but device would have to support canbus

  • @soxthedog068
    @soxthedog068 11 หลายเดือนก่อน

    I ran the power to pioneer double din from lighter socket and the connects 2 kit works great for steering control just needed earthing off and jack plugged into back of headunit took around 3 hours altogether including losing my tools all the time 😅

    • @AlexBradshaw-by9yw
      @AlexBradshaw-by9yw 11 หลายเดือนก่อน +1

      How did you run the power from the lighter?

    • @arcgarage
      @arcgarage  11 หลายเดือนก่อน +1

      Great to her that, searching for tools usually takes the most time

    • @99tomsmith
      @99tomsmith หลายเดือนก่อน

      Hi why do you need to plug headphones into the unit?

  • @SirCartieer2900
    @SirCartieer2900 ปีที่แล้ว +2

    Hey I I stalled everything but every time I put some music on, after like 20 sec depending on the volume the system turns off and reboots

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      Check the wiring, make sure you installed everything properly, and that you used a proper power source

    • @SirCartieer2900
      @SirCartieer2900 ปีที่แล้ว +1

      @@arcgarage yes you were right the 12v cable was connected wrong

  • @julianvanos8025
    @julianvanos8025 11 หลายเดือนก่อน

    Hi, very nice video. Thanks! But, I have a question. Are you still able to setup and the menu of the display behind the steering wheel?

    • @arcgarage
      @arcgarage  11 หลายเดือนก่อน

      Hi, on my car you do that using the menu buttons on the left side, and the button on the wiper lever

    • @julianvanos8025
      @julianvanos8025 11 หลายเดือนก่อน

      Ok, thanks!

  • @quentin3792
    @quentin3792 2 หลายเดือนก่อน

    Hello ARC Garage! Is 7" the cleanest setup with the 2 din dash trim piece? I'm tempted to go 9" but I guess the screen will have to pop out a bit?

    • @arcgarage
      @arcgarage  2 หลายเดือนก่อน

      Hi, another 10" install for the G is coming soon. So we'll see what's better

    • @quentin3792
      @quentin3792 2 หลายเดือนก่อน

      @@arcgarage Great! Thank you for taking the time to answer. Greetings from France.

    • @arcgarage
      @arcgarage  2 หลายเดือนก่อน

      @@quentin3792 No problem my friend, Greetings

  • @martinthornber6356
    @martinthornber6356 10 หลายเดือนก่อน

    Great video - did the satnav antenna work well enough hidden away there under the dashboard?

    • @arcgarage
      @arcgarage  10 หลายเดือนก่อน

      Thanks, it works perfectly, didn't have any issues

  • @mileswren950
    @mileswren950 7 หลายเดือนก่อน

    What happens in regards to the buttons on the steering wheel and blue&me , does it no longer activate the blue&me ? great video as always

    • @arcgarage
      @arcgarage  7 หลายเดือนก่อน

      I removed blue&me completely (and did the proxy alignment), buttons work perfectly with new head unit which has all of the phone connecting capabilities

  • @FinnGraingerTBI
    @FinnGraingerTBI 9 หลายเดือนก่อน +1

    I currently have a 10inch screen ready to go in, but i am facing an issue i have never seen before.
    I'll try and explain as best as i can...
    When the original radio is in it is fine, but as soon as the new 10inch radio is in, it has no power whatsoever. I have seen an article stating something about the power being swapped in alfa romeo wires hence why a straight plug in doesn't work, is this true?
    I have seen a simple radio adaptor like the one seen in the fascia box, would this be a fix and help the radio to power on if i was to install the adaptor?
    I really hope this makes sense :)

    • @arcgarage
      @arcgarage  9 หลายเดือนก่อน

      Hi, you can see in the video how you can connect it using a piggyback fuse

  • @milan5610
    @milan5610 4 หลายเดือนก่อน

    How do you connect a can bust adapter?

  • @Shadow7316
    @Shadow7316 ปีที่แล้ว

    Very nice video. I used it for my G.
    Do you know of a problem where the HU reboots, when you have the music to loud?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Consult the audio expert, but I think you might need an amplifier

  • @stanislaoiandolo1242
    @stanislaoiandolo1242 ปีที่แล้ว

    Very good video. I want to install the same on my Giulietta as well. I ask to all where can I find the 2 din dash black like yours for both side of the car. Right one and left side? Thank you

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Thanks, you can get them on ebay

  • @maciejnorek1398
    @maciejnorek1398 หลายเดือนก่อน

    Hi guys, recently i have bought my first ever gulietta, and instaled this type of android screen but i dont know if i did something wrong but the buttons on steering wheel don't work with the screen. ( i cant change songs or even change volume ). Is there anything i can do to make it work together ?

  • @lordfader66
    @lordfader66 ปีที่แล้ว

    Nice work! Is there also a black cover for the left part of dashboard available somewhere?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Thanks, there isn't as far as I know, I am going to repaint the rest of the trim in glossy black

    • @lordfader66
      @lordfader66 ปีที่แล้ว

      Then its perfect! You noticed any battery drain through constant 12V with this device? Really thinking about installing the Atoto A6Pf...

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      @@lordfader66 No battery drain, I got to say I am more than happy with this setup

  • @diegosti
    @diegosti หลายเดือนก่อน

    A question buddy! The atoto comes with the connector to the oem connector for the radio?

    • @arcgarage
      @arcgarage  หลายเดือนก่อน

      Yes it does

  • @steliostheofanou1368
    @steliostheofanou1368 ปีที่แล้ว

    nice work my friend !!!!!!!!!

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Thank you very much

  • @stefanatanasov5580
    @stefanatanasov5580 ปีที่แล้ว

    Hi, very nice video.
    I just didn't understand do you have the flashing odometer problem with this method of installation?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Hi, thanks, I didn't have the flashing odometer, I left the blue&me module plugged in, but even if you have to remove it, you can easily solve the issue using diagnostic tool.

    • @stefanatanasov5580
      @stefanatanasov5580 ปีที่แล้ว

      @arcgarage
      As far as I understood when an aftermarket radio is installed and a Proxi alignment is made you get error because you don't have the original radio.
      And are there any benefits of getting the Canbus module?

  • @alexrudabacalla
    @alexrudabacalla ปีที่แล้ว +1

    Hi, this head unit has Carplay?? because i have an Iphone and i will connect it to the car, Thanks!

  • @woyopol
    @woyopol 6 หลายเดือนก่อน

    What about car settings? E.g wipers sensitivity etc?

    • @arcgarage
      @arcgarage  6 หลายเดือนก่อน

      Radio didn't have any of those settings, if that's what you mean

  • @rles65
    @rles65 ปีที่แล้ว

    have you connected the steering wheel buttons with the unit directly or did you need an extra interface for that? Thanks!

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Hi, they are connected directly

    • @rles65
      @rles65 ปีที่แล้ว

      @@arcgarage OK, thanks and keep up the good work!

  • @eurosh7328
    @eurosh7328 4 หลายเดือนก่อน

    Pozz brate, jel bi postao bilo kakav nacin da ne secem na autu nista?

  • @fcp08
    @fcp08 ปีที่แล้ว

    nice install... will the odometer flash if i install the same way you did? my blue&me is not working so odometer is flashing... install aftermarket headunit will this fix the odometer flashing?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Well, if it's flashing, you'll have to use diagnostic tool to turn it off. If your Blue&me is in working order you don't have to do anything, leave it as it is

  • @adebowalekonstantinov404
    @adebowalekonstantinov404 5 หลายเดือนก่อน

    Hey man! I installed a new head unit in my Giulietta MA from 2010 and decided to do the steering wheel button controls. I cut the wires you mentioned in the video: 38 and 51, double, triple and quadruple checked the pins and the connector, but the wires didn't lead to the steering wheel controls, but instead cut off my central locking and my parking sensor. When I soldered them back, everything was back to normal. Could it be my Giulietta has the pins somewhere else? I saw on elearn a contradiction, one paper says it's 38 and 51, and another sheet says it's 50 and 52, but at this point I'm too afraid to check again :D

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน

      Yes, it could be different pinout, try to get the wiring diagram for the exact model year. Don't be afraid. He who dares wins

    • @adebowalekonstantinov404
      @adebowalekonstantinov404 5 หลายเดือนก่อน

      @@arcgarage Thanks for the reassurance! I'll try to lookup the wires again, they're probably 50 and 52 in my case, but I want to be really sure this time, I'll report back :)

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน

      @@adebowalekonstantinov404 No problem, ok great

  • @joneveritt1898
    @joneveritt1898 ปีที่แล้ว

    Hi, superb video, thank you. Can you tell me what year is the giulietta you did it on?

  • @doleginho
    @doleginho 7 หลายเดือนก่อน

    Hi, do you think it would be possible to replace the unit without buying new fascia? By cutting in existing one?

    • @arcgarage
      @arcgarage  7 หลายเดือนก่อน

      Hi, it would, but it requires so much work to make it fit right, that it comes out cheaper just to buy it

    • @doleginho
      @doleginho 7 หลายเดือนก่อน

      @@arcgarage it looks like you would just have to cut out a rectangle in it, that's why I asked if there is a need to buy new one :D

  • @arnotx2163
    @arnotx2163 6 หลายเดือนก่อน

    Hello, is it exactly the same way to install rear camera on an Alfa 147 ?

    • @arcgarage
      @arcgarage  6 หลายเดือนก่อน +1

      Hi, yes, pretty much the same

  • @Twing2023
    @Twing2023 3 หลายเดือนก่อน

    Hi,
    Did you have to remove the rear bumper to fit the camera?
    I've installed similar setup minus camera

    • @arcgarage
      @arcgarage  3 หลายเดือนก่อน +1

      No, you can guide the cable through the reverse light

    • @Twing2023
      @Twing2023 3 หลายเดือนก่อน

      @@arcgarage thank you. Your video really helped with the install of my atoto unit.

    • @arcgarage
      @arcgarage  3 หลายเดือนก่อน

      @@Twing2023 Welcome, glad to hear that

  • @cavallarocosimo4148
    @cavallarocosimo4148 ปีที่แล้ว

    Hello
    Is it te same procedure with the Bose system?
    I bought am Atoto S8 ultra Gen2 and want to install it.
    Thanks for your help

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      It is pretty much the same, just check out the wire for amplifier, it has to be connected for speakers to work, no problem, thanks for watching

  • @siggenish
    @siggenish ปีที่แล้ว

    Hey ARC garage. Thanks for some great videos!
    My 2012 giulietta QV has the external screen for satnav, not the screen and radio in the same module.
    Can i still install this module, and will the external screen still work? :)

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Thanks for support. You have to check out the wiring, and what it's connected to. If it gets info from radio, it won't work, if it works over body control module it will

    • @siggenish
      @siggenish ปีที่แล้ว

      Alright i will check that out! Thanks!😊

  • @dukabazuka
    @dukabazuka 5 หลายเดือนก่อน

    poz imao bih pitanje oko fabricke radiop table, konkretno moj giuletta qv '12 model ima radionav sistem, ekrancic sa fabrickom navigacijom iznad a dugmici za kontrolu su na samom fabrickom radiu sa desne strane, dakle ugradnjom aftermarket multimedije bi oni tehnicki bili uklonjeni/bezfunkcije

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน

      Pozdrav, da

  • @franciscojosevilarbarrera1579
    @franciscojosevilarbarrera1579 8 หลายเดือนก่อน

    Hola, buenas tardes desde España. Sería posible instalar la ATOTO de 10 pulgadas?

    • @arcgarage
      @arcgarage  8 หลายเดือนก่อน

      Hi, yes

  • @dyontje52
    @dyontje52 ปีที่แล้ว

    Will i be able to replace the pop screen in a alfa?

  • @arnotx2163
    @arnotx2163 6 หลายเดือนก่อน

    What do you think better choice : buy this Atoto S8 Android head Unit or a Carplay adaptator for the Uconnect 6.5"" Radio Nav ?

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน +1

      I would go for Atoto, it is like having a computer in your car

  • @mndx89
    @mndx89 ปีที่แล้ว

    Are you going to swap the entire odometer cluster?
    I noticed that on your Giulietta (but also on 147) you have the low resolution version, with smaller board computer LCD...
    This probably depends by the market to which the car is assembled for.
    On the 147 I'm absolutely sure that you clan replace it with the higher spec version simply swapping the units and doing a body alignment. Giulietta should be the same.
    The steering wheel mod for the buttons is genius indeed...maybe a bit invasive, but certainly functional!

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      Thanks, I was thinking about it, might do it in the near future...

  • @christianvergara2482
    @christianvergara2482 ปีที่แล้ว

    Hi, amazing video. If I buy the Atoto A6 which is much cheaper than the S8. Could the same wiring procedure be done to avoid buying a can bus?

  • @ToxicAsLemon
    @ToxicAsLemon ปีที่แล้ว

    Is it that simple even if the car has Blue&me? Or even withh bose?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      My car has blue and me, and if your car has bose, you just need to connect the amp wire, and that's it

    • @heikobeyer6842
      @heikobeyer6842 ปีที่แล้ว

      ​@@arcgaragedo you know which wire at the Alfa is the amp wire?

  • @mehdisalmi2829
    @mehdisalmi2829 ปีที่แล้ว

    Hi, great video y. Thank you 👍Would you know by any chance someone who would do the instalation in Dalmatia? Hvala

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Pozdrav, stvarno ne znam

    • @mehdisalmi2829
      @mehdisalmi2829 ปีที่แล้ว

      Hi again, please can you help with the facial and send some link or reference. Hard to find on the internet the Giulietta one that will fit with Atoto S8. Thanks

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      @@mehdisalmi2829 No problem, here it is www.ebay.co.uk/itm/391151115829 that is the one I bought

    • @mehdisalmi2829
      @mehdisalmi2829 ปีที่แล้ว

      Thank you very much

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      @@mehdisalmi2829 No problem

  • @craigcarrillo
    @craigcarrillo ปีที่แล้ว

    Did you install a screen protector?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      It actually came with one installed

  • @alfavinny
    @alfavinny ปีที่แล้ว

    Can this be done on the radionav models too my friend.

  • @piotrgaweda8071
    @piotrgaweda8071 ปีที่แล้ว

    Hi what is the total cost to set up this panel in the car?

  • @xheniszela375
    @xheniszela375 ปีที่แล้ว

    Great work

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Thank you very much 😀

  • @Chaîne86
    @Chaîne86 8 หลายเดือนก่อน

    Can you do the same for my Alfa Romeo please ?

    • @arcgarage
      @arcgarage  8 หลายเดือนก่อน +1

      I don't really have time for it, sorry

  • @simke1109
    @simke1109 ปีที่แล้ว

    Pozdrav iz Slovenije. Jel postoji mogučnost, da bi mi ugradio ovaj LCD sistem sa kamerom u moju Giuliettu ?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Pozdrav, iskreno da ti kazem ne mogu da se uganjam sa vremenom

  • @chrisellis882
    @chrisellis882 ปีที่แล้ว

    Can you show us how you got the camera cable through to the licence plate light please. I have tried this several times and have never managed to get it through.

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      I tried to film it but it was impossible, guide the cable through number plate light, to the bottom of the bumper, then reach from beneath a guide it through wire access hole in the body. It is a bit tricky, but it is doable...

    • @chrisellis882
      @chrisellis882 ปีที่แล้ว

      @@arcgarage thanks, will give it another go

  • @markojelenkovic663
    @markojelenkovic663 ปีที่แล้ว

    Povezao sam zice za kontrole sa volana. I sad daje kontakt ali nece da pali. Prikazuje mi katanac kao da mi ne prepoznaje kljuc. Sta da radim?

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      Odvezi ti to brate elektricaru da ti napravi, da ne napravis nekakav problem

    • @markojelenkovic663
      @markojelenkovic663 ปีที่แล้ว

      @@arcgarage Hvala na brzom odgovoru. Zvao sam ih odma svi su zauzeti... Kontrole volana sad rade na tabletu. Tako da sam povezao prave zice. Mozda je izgubila neka zica kontakt...

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      @@markojelenkovic663 Moguce, ajd dobro da si spojio komande, znaci da si uradio dobro, samo uvijek pazljivo sa takvim stvarima

    • @markojelenkovic663
      @markojelenkovic663 ปีที่แล้ว

      @@arcgarage Iskljucio akumulator. Treci put otkacio sve dzekove i zakacio. I sad Radi.

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      @@markojelenkovic663 Odlicno, drago mi je da si sredio

  • @antoniodelamontana9636
    @antoniodelamontana9636 5 วันที่ผ่านมา

    Siguen funcionando el USB

    • @arcgarage
      @arcgarage  5 วันที่ผ่านมา

      Got 2 USB's with new head unit

    • @antoniodelamontana9636
      @antoniodelamontana9636 5 วันที่ผ่านมา

      @arcgarage The one in the glove compartment still works to play music

  • @micintropskibar
    @micintropskibar ปีที่แล้ว

    Pozdrav, da li ti vrši ugradnju ovog uređaja?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Pozdrav, samo za prijatelje kad uhvatim vremena

    • @micintropskibar
      @micintropskibar ปีที่แล้ว

      @@arcgarage jasno, hvala

  • @Stfn91
    @Stfn91 ปีที่แล้ว

    Hello, where can i buy all of this?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Hi, you got links in description

  • @manuelsolsona5795
    @manuelsolsona5795 ปีที่แล้ว +1

    Hope this radio is better than this of the alfa GT...😏

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      This one is great, very good specs

  • @NiteProShorts
    @NiteProShorts ปีที่แล้ว

    This is video is useful thanks👍

  • @Robert-Mk
    @Robert-Mk ปีที่แล้ว

    Многу добро видео браво 👌

  • @carpuckluke
    @carpuckluke ปีที่แล้ว

    What unit did you put in

  • @SoyEneko10
    @SoyEneko10 8 หลายเดือนก่อน

    Hola urgente. Tiene mandos al volante?

    • @arcgarage
      @arcgarage  8 หลายเดือนก่อน

      Yes, watch the video, you'll see how I connected them

  • @berin6880
    @berin6880 5 หลายเดือนก่อน

    Mozel se dje drugo nabavit

    • @arcgarage
      @arcgarage  5 หลายเดือนก่อน

      Moze bilo gdje, cak nemoras ni ovaj brend ima kamaru jeftinijih opcija samo pazi na specifikacije

  • @MSXRECORDS
    @MSXRECORDS 2 หลายเดือนก่อน

    F that! Taking mine to a car audio specialist, dont care how much it costs

    • @arcgarage
      @arcgarage  2 หลายเดือนก่อน

      Why man, it ain't that bad?

  •  ปีที่แล้ว

    How would you compare this unit vs. some standard brands like Pioneer?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      While there are some units from Pioneer, Kenwood etc which use android, most of them don't. So you get that basic interface which doesn't allow for much customization. Android, for me, is the way to go. So having this Atoto is essentially as having a computer in your car.

    •  ปีที่แล้ว

      ​@@arcgarage Ok, I've ordered the fascia cover. I'm going to order Atoto S8 unit with most of the accessories.
      I'm just wondering through where did you guide that long wire from the reverse camera all the way up front?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      @ Under the plastic trim

    •  ปีที่แล้ว

      @@arcgarage Oh the one at the floor of the car?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      @ yes

  • @stojanovica5107
    @stojanovica5107 ปีที่แล้ว

    Zdravo druže.
    Godinama imam multimediju na Alfi 159 kojoj nisam uspeo da povezem komande volana, tvoj video mi je dao nadu da je moguće povezati.
    Da li mozda znaš koje pinove treba da povezem, ili da me uputis gde bih mogao da potražim odgovor na to pitanje?

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      Pogledacu ja da li imam, samo posalji specifikacije auta da provjerim u programu, god, motor, itd

    • @stojanovica5107
      @stojanovica5107 ปีที่แล้ว

      U pitanju je Alfa 159 1.9 jtdm 16v, 150ks 2006-to godište.

    • @arcgarage
      @arcgarage  ปีที่แล้ว

      @@stojanovica5107 Sad sam gledao, nemam za 159ku. Pisi po fb grupama da vidis da li neko ima diagram za body control module

    • @stojanovica5107
      @stojanovica5107 ปีที่แล้ว

      Ok, hvala puno na odgovorima, pokušaću da nađem. Samo mi reci da znam koje oznake tražim? Šta kod tebe označavanju pinovi 51 i 38?

    • @arcgarage
      @arcgarage  ปีที่แล้ว +1

      @@stojanovica5107 38 zica za kontrole na ljevoj strani, 51 zica za desnu

  • @sametcanyuca
    @sametcanyuca 3 หลายเดือนก่อน

    boot time in 2 business days

  • @EuntaeHwang
    @EuntaeHwang 2 หลายเดือนก่อน

    Looking at how complicated it is I'd rather save my money for a facelift with built in infotanment, this is really challenging. But of course good job, at least I know how to do it. But overall, this radio doesn't fit interior at all.

    • @arcgarage
      @arcgarage  2 หลายเดือนก่อน

      Thanks, I would disagree that it doesn't fit. I was thinking about installing the factory one, but you have to keep in mind that they are outdated. This unit with camera is very good

  • @MauryXman
    @MauryXman 6 หลายเดือนก่อน

    WOW one of the best video tutorial what i have see 🫣🥴😁

    • @arcgarage
      @arcgarage  6 หลายเดือนก่อน

      Thanks, glad you think that