Hi 12voltvids, Nothing much wrong with your sight but you sure do know what you are at and good to see you are still repairing everything, Great job well done, and keep up the good work, it was with your help I started repairing TV sets. So thanks for your Videos.
I like this video as now i understand how easy it can be to end up with alignment of gears troubles. Also the manual manual steping thru the loading sequence is certainly important
Smashing repair, saved from landfill for another day lol. Wow that's sensor crack mania, never seen it that bad ever!. I've never damaged a mode switch contacts, just a tiny lift to restore the contact pressure. I'm no lover of the single board vcr, but most seem to do the job fine 😀
Thank You for a very descriptive repair video. Helps me to understand how to remove the tape mechanism from the board. I cannot find a Single VCR or even a DVD repair technician in Singapore. Hooe to see more of Sharp VCRs repair video from you. 🙏👍
A cheap and cheerful Sanyo. I had a small Sanyo VHS Hi-Fi VCR like this one from circa 1993 that I used constantly until it finally died in around 2005. Paid around $250 for it I think, a bargain at the time. Definitely got my money's worth. Replaced it with a Panasonic VHS/DVD recorder that I still have.
Ouch, that shipping is gonna sting! I'm now 40 & just started using a magnifier in the last year or so, keep kidding myself it's just PCB traces getting finer but we all know that's not true lol. Makes things so much easier when we accept our limitations. I guess you have a good 15-20 years on me, being in the business since I was in nappies so you're not doing badly at all with the eyes. Long may it continue too, always a pleasure to see a master at work.
This is another example of not following the simple rule of rechecking your work after incountering new difficulties once cleaning or servicing a vcr. i freqently add new problems during repairs and i do find them later when i take a second look at things.
Another video closer to me sending my VO2800 U-matic to you. Though I probably will run and hide at the cost of shipping from Chicago up to you. Got a similar issue with it, though I’m not entirely sure if the umatic machines have a different loading process other than the u shape load
I'm 59 and I've had to start wearing readers for very small print and close-up work. My distance vision has always been very good, and never had to wear glasses before and never been near sighted.
I started wearing glasses at about 13 and contacts from 16 on to 47 when i bit the bullet and had LASIK. I never knew how sore my eyes were wearing contacts so long but man it was nice to not have to wear them anymore. Have friends that could benefit from procedure but they are too nervous to get it done. So they have to deal with glasses fogging up and getting wet in the rain or deal with the dry contacts issue when in air conditioned environments.
spotted that the middle LED solder was over flowed, and both contacts joined.. I need glasses for distance, but can see clear enough when working on PCBs & decks. Great video as always though:)
overflowed? joined together? no mate, it was a dry solder joint, if it was joined together then that would be shorting it out.. and that wouldn't be good
Hey, I have a new old stock Radio Shack dual tape deck I think would be a good video for you to make, I'd like to send in to you to get a check-over. My grandpa died 2 years ago and he was an electronics hoarder and among the stuff I ended up getting was this tape deck from 2002(?) still unused in the packaging and even with the original receipt taped to it. Its in pristine condition cosmetically but because of how long it sat I'd like to make sure the belts are all good and there's no bad solder spots. If you'd be interested in taking it in and hopefully giving it a good bill of health let me know how I can reach you.
Is there a reason that you're messing with all the electronics while the unit is seemingly powered up/connected to mains? Is it low enough voltage? Not a criticism, just genuinely curious about thought process / if I'm missing something.
Hey, I was looking to get a camcorder that my father had fixed, and I can't seem to find any direct contact information for you. How do I reach you regarding sending you the item to be assessed and repaired? Thanks!
Once several problems occure at the same time and new priblems intrduced by attempted repairs as in this case it becomes almost imposuble to fix these things. clearly only an expert can be successful in tracking down four issues preventing the proper operation of this vcr
Cheaters are what i use at work for fiber splicing. They are very small with no frame, very light weight and sit on nose. Designed to be like bifocals for folks that don't need bifocal. Look down and see through the lens look up and see over them. I should buy myself a second pair for the work bench as they are better then these dollar store specials. I have a very expensive frame from my glasses wearing days that I had some prescription readers made for +1 and +1.5 which are supposed to be even better then these cheap ones but i really don't see a difference. I try not to use them. I prefer to exercise my eyes by forcing myself to see close up for all but where i really need them. Keep the lens in the eye as flexible as possible. Those I know that started using readers younger needed to kept getting stronger lenses as their eyes got lazy. So i will look at my phone then at the tv then the phone and so on. Keep changing focus distance is a big help to keeping the peepers working at their best.
It's actually pretty simple. The audio is recorded at a much different angle on the tape. The video heads are +7 and -7 degrees from perpendicular to the tape. The audio hi-fi is -30 and plus 30 from being perpendicular. This means that there is a 37° spread between the video and audio heads. The audio is laid down had a very high record current on to the tape and then the video records over top of the audio that has been laid down into this deep layer on the tape. The video signal does erase part of the audio signal as it's being recorded over top but because the very different angles that the heads are facing the tape there's enough of the audio signal left in the deep layer of the tape that it can be played back because the steep angle rejects the video signal interfering with the audio and vice versa. This is how VHS Hi-Fi work. Beta hi-fi and 8mm hi8 work totally different. On beta and 8 mm there is much more bandwidth available so the audio is just placed in between the chroma and the luminous signal. There's enough of a space between the two signals for the audio carriers which are frequency modulated like the luminance carrier is. Beta for the pal system had to adopt the same recording method that VHS used because due to the Head drum spitting slower there wasn't enough bandwidth to insert the audio carriers between the chroma and luminance.
There used to be a test card that you would expose to bright light to charge them up then they would glow in a specific ultra violet range. You held this test card up to the infrared device under test and if it was emitting light it would show up as a pail orange to green glow on the test card depending on the IR wavelength but i havent seen these since the early 80s when IR remotes first became available. You can also use a black and white ccd or cmos camera as they can see IR, or you can take a regular color camera and physically remove the IR cut filter which is precisely what the nightshot mode does on video cameras. No you can't just use your phone. Some excessively bright LEDs such as remote controls might have enough near visible harmonic radiation emitted to break through the IR cut filter but low output devices such as rotation sensors or tape sensors will not have enough secondary emission to see anything without eliminating that cut filter.
It's is pretty cool what they can fix now with the laser. I had astigmatism too, that was also corrected. I have forgotten what it is like to wear glasses or contacts as unless I am working on something up real close I don't wear any.
Hey I'm having 2 problems with my sony str de997 receiver.. issue number 1- whenever i use the Multi Channel In 1 function, using any of the RCA inputs creates a buzzing and hum noise in the speakers. Now jiggling the RCA plugs a bit seems to have an influence on the buzzing and hum... But here's the weird part, whenever i use the same cables on the Multi Channel In 2, the buzzing and humming is gone. Another thing is that using a regular input like for example the SA-CD/CD input removes the humming and buzzing from all channels. So clearly there's something wrong with the Multi Channel In 1. I actually have an identical motherboard that i use for parts from it. The reason i don't use the duplicate one is that there's alot more issues with that one. Issue number 2- the front A/B Speaker selectors aren't working. Usually when operating the speaker select button, i hear the relay clicks for A/B and the Rest toggle on and off. Now i only hear clicks for speakers A and the rest. Whenever Speakers B is selected and deselected, there are no relay clicks. Also, there is no audio from any of the front A/B speakers. Hopefully you can help me identify the part i need to replace. Thanks in advance and i really appreciate it
Sir i ask you a favor ..if you have a schematic diagram of pioneer amplifier model A405...my problem is the two resistor near filter capacitor is burn out and i have no idea what resistor ohms i replace cause of no color coding cause of burn out..the part no.in printed circuit is Resistor 565 and resistor 566..i hope that you can help me sir.from your subscriber in the Philippines thanks in advance sir.
@@crashbandicoot4everr im very glad for your reply sir..the model of my amplifier is pioneer stereo amplifier model A-405 560 W JAPAN MFD.NOV.1999..sir im very sure the part number of the resistor R 565 and 566.. and the 565 are connected in series to negative output of right channel.speaker. the two said resistor is located near 10000 uf filter capacitor.. again thank you sir.
@@marcelinopagsanjan6959 Oh. I made a mistake. I was looking at the schematics for the A-405R. The A-405 (non-R) is a much newer and different model. Unfortunately I can't find any schematics for that model.
Yes he can make a claim for refund after it is exported back to USA. I check the box goods returned to USA when i ship back. Prior to pandemic i actually took a piece of equipment to the states to mail back and made the claim. Got back all but 10.00 but had to pay 10.00 to take across the line to mail. So it cost 20 and I got 40 back. Took about 3 months to get refund. Tried it a second time and got a letter denying the claim. So I don't do that now for anyone. They can do it on their end.
@@12voltvids Yes, its a hassle anyone could do without. A simple refund request like most paperwork we have to undertake on the Web, rob's a ridiculous amount of time from us all. As a 5 minute task spiral's into 1 hour task.
Hi 12voltvids, Nothing much wrong with your sight but you sure do know what you are at and good to see you are still repairing everything, Great job well done, and keep up the good work, it was with your help I started repairing TV sets. So thanks for your Videos.
I like this video as now i understand how easy it can be to end up with alignment of gears troubles. Also the manual manual steping thru the loading sequence is certainly important
Great video I still record with vhs tapes everyday making movies from internet and putting them on my vhs tapes
It's such a joy to see a experienced man or woman doing repairs.
I do use glasses when I'm driving but my nearsight is good so far.
Great video 😊 👍
Smashing repair, saved from landfill for another day lol.
Wow that's sensor crack mania, never seen it that bad ever!.
I've never damaged a mode switch contacts, just a tiny lift to restore the contact pressure.
I'm no lover of the single board vcr, but most seem to do the job fine 😀
Superb quality video throughout. Amazingly sharp over the whole screen. Thank you very much.
MGN-Fire
Thank You for a very descriptive repair video. Helps me to understand how to remove the tape mechanism from the board. I cannot find a Single VCR or even a DVD repair technician in Singapore. Hooe to see more of Sharp VCRs repair video from you. 🙏👍
A cheap and cheerful Sanyo. I had a small Sanyo VHS Hi-Fi VCR like this one from circa 1993 that I used constantly until it finally died in around 2005. Paid around $250 for it I think, a bargain at the time. Definitely got my money's worth. Replaced it with a Panasonic VHS/DVD recorder that I still have.
Ouch, that shipping is gonna sting! I'm now 40 & just started using a magnifier in the last year or so, keep kidding myself it's just PCB traces getting finer but we all know that's not true lol. Makes things so much easier when we accept our limitations. I guess you have a good 15-20 years on me, being in the business since I was in nappies so you're not doing badly at all with the eyes. Long may it continue too, always a pleasure to see a master at work.
I’m glad I didn’t have to deal with that sending my Yamaha cassette deck, that was the first time I sent something to you, glad it went smoothly
This is another example of not following the simple rule of rechecking your work after incountering new difficulties once cleaning or servicing a vcr. i freqently add new problems during repairs and i do find them later when i take a second look at things.
Another video closer to me sending my VO2800 U-matic to you. Though I probably will run and hide at the cost of shipping from Chicago up to you. Got a similar issue with it, though I’m not entirely sure if the umatic machines have a different loading process other than the u shape load
Watching sir fr. Philippines..
I'm 59 and I've had to start wearing readers for very small print and close-up work. My distance vision has always been very good, and never had to wear glasses before and never been near sighted.
I started wearing glasses at about 13 and contacts from 16 on to 47 when i bit the bullet and had LASIK. I never knew how sore my eyes were wearing contacts so long but man it was nice to not have to wear them anymore. Have friends that could benefit from procedure but they are too nervous to get it done. So they have to deal with glasses fogging up and getting wet in the rain or deal with the dry contacts issue when in air conditioned environments.
Great videos you make 👍my panasonic nv 25 sd is not loading . i bought it used as is .. do you have any idea why ? Thank you
spotted that the middle LED solder was over flowed, and both contacts joined.. I need glasses for distance, but can see clear enough when working on PCBs & decks. Great video as always though:)
overflowed? joined together? no mate, it was a dry solder joint, if it was joined together then that would be shorting it out.. and that wouldn't be good
It’s all smoke and mirrors it looks like the guy gets punched but it’s just camera angles.No shorts were made by 12volts
Hey, I have a new old stock Radio Shack dual tape deck I think would be a good video for you to make, I'd like to send in to you to get a check-over. My grandpa died 2 years ago and he was an electronics hoarder and among the stuff I ended up getting was this tape deck from 2002(?) still unused in the packaging and even with the original receipt taped to it. Its in pristine condition cosmetically but because of how long it sat I'd like to make sure the belts are all good and there's no bad solder spots. If you'd be interested in taking it in and hopefully giving it a good bill of health let me know how I can reach you.
My contact info is in the about tab on the main page. Would be happy to look it over and make a video.
@@12voltvids i don't know if I'm looking at the wrong thing because I'm on the mobile app but I don't see it
@@crazycalvinwilliams it is in the about page. Try opening a browser and going to TH-cam.com
@@12voltvids ok I see it now, just sent you an email
14:30 That looks quite worn out. I suppose it is impossible to get replacements.
Yes ive learned how my hotglue efforts have caused many problems and becomes hard to correct its damsges
Is there a reason that you're messing with all the electronics while the unit is seemingly powered up/connected to mains? Is it low enough voltage? Not a criticism, just genuinely curious about thought process / if I'm missing something.
Its relatively low voltage and even the mains connected part is on an isolation transformer so I would have to try real hard to shock myself.
@@12voltvids awesome. Was wondering. Thanks again.
Hey, I was looking to get a camcorder that my father had fixed, and I can't seem to find any direct contact information for you. How do I reach you regarding sending you the item to be assessed and repaired? Thanks!
My email is in the about tab
Once several problems occure at the same time and new priblems intrduced by attempted repairs as in this case it becomes almost imposuble to fix these things. clearly only an expert can be successful in tracking down four issues preventing the proper operation of this vcr
My grandmother used to call her reading glasses cheaters. :)
Cheaters are what i use at work for fiber splicing. They are very small with no frame, very light weight and sit on nose. Designed to be like bifocals for folks that don't need bifocal. Look down and see through the lens look up and see over them. I should buy myself a second pair for the work bench as they are better then these dollar store specials. I have a very expensive frame from my glasses wearing days that I had some prescription readers made for +1 and +1.5 which are supposed to be even better then these cheap ones but i really don't see a difference.
I try not to use them. I prefer to exercise my eyes by forcing myself to see close up for all but where i really need them. Keep the lens in the eye as flexible as possible. Those I know that started using readers younger needed to kept getting stronger lenses as their eyes got lazy. So i will look at my phone then at the tv then the phone and so on. Keep changing focus distance is a big help to keeping the peepers working at their best.
gave the 150 like for you
The one question that an owner does NOT want to hear from a repair person: "Who was the last one to work on this?" :)
A repairman would never ask that question because he doesn't want to know the answer it could have been him!
@@12voltvids Ha ha, good one!
I still can’t grasp that the hifi head spins with the video head on hifi machines they say the audio is underneath the video on the tape .
It's actually pretty simple. The audio is recorded at a much different angle on the tape. The video heads are +7 and -7 degrees from perpendicular to the tape. The audio hi-fi is -30 and plus 30 from being perpendicular. This means that there is a 37° spread between the video and audio heads. The audio is laid down had a very high record current on to the tape and then the video records over top of the audio that has been laid down into this deep layer on the tape. The video signal does erase part of the audio signal as it's being recorded over top but because the very different angles that the heads are facing the tape there's enough of the audio signal left in the deep layer of the tape that it can be played back because the steep angle rejects the video signal interfering with the audio and vice versa. This is how VHS Hi-Fi work. Beta hi-fi and 8mm hi8 work totally different. On beta and 8 mm there is much more bandwidth available so the audio is just placed in between the chroma and the luminous signal. There's enough of a space between the two signals for the audio carriers which are frequency modulated like the luminance carrier is. Beta for the pal system had to adopt the same recording method that VHS used because due to the Head drum spitting slower there wasn't enough bandwidth to insert the audio carriers between the chroma and luminance.
@@12voltvids ok thank you for that I took a video course long time ago and teacher didn’t tell about the angles .
How could you have verified the LEDs other than using a night-vision camera?
There used to be a test card that you would expose to bright light to charge them up then they would glow in a specific ultra violet range. You held this test card up to the infrared device under test and if it was emitting light it would show up as a pail orange to green glow on the test card depending on the IR wavelength but i havent seen these since the early 80s when IR remotes first became available. You can also use a black and white ccd or cmos camera as they can see IR, or you can take a regular color camera and physically remove the IR cut filter which is precisely what the nightshot mode does on video cameras. No you can't just use your phone. Some excessively bright LEDs such as remote controls might have enough near visible harmonic radiation emitted to break through the IR cut filter but low output devices such as rotation sensors or tape sensors will not have enough secondary emission to see anything without eliminating that cut filter.
Man you make it look so easy I wish I had of kept my Mitsubishi I had a U69 and a u68 they cost 700 back in the day
@@johnh5896 it is easy.
dave i have to wear glasses to work with smallerstuff still now eyes started going bad when i was 23 around 19 years ago
It's is pretty cool what they can fix now with the laser. I had astigmatism too, that was also corrected. I have forgotten what it is like to wear glasses or contacts as unless I am working on something up real close I don't wear any.
Hey I'm having 2 problems with my sony str de997 receiver.. issue number 1- whenever i use the Multi Channel In 1 function, using any of the RCA inputs creates a buzzing and hum noise in the speakers. Now jiggling the RCA plugs a bit seems to have an influence on the buzzing and hum... But here's the weird part, whenever i use the same cables on the Multi Channel In 2, the buzzing and humming is gone. Another thing is that using a regular input like for example the SA-CD/CD input removes the humming and buzzing from all channels. So clearly there's something wrong with the Multi Channel In 1. I actually have an identical motherboard that i use for parts from it. The reason i don't use the duplicate one is that there's alot more issues with that one. Issue number 2- the front A/B Speaker selectors aren't working. Usually when operating the speaker select button, i hear the relay clicks for A/B and the Rest toggle on and off. Now i only hear clicks for speakers A and the rest. Whenever Speakers B is selected and deselected, there are no relay clicks. Also, there is no audio from any of the front A/B speakers. Hopefully you can help me identify the part i need to replace. Thanks in advance and i really appreciate it
Why the hell do people put declared values on broken machines...
put isopropyl alcohol on hot glue and it will peal right off no problem.
Sir i ask you a favor ..if you have a schematic diagram of pioneer amplifier model A405...my problem is the two resistor near filter capacitor is burn out and i have no idea what resistor ohms i replace cause of no color coding cause of burn out..the part no.in printed circuit is Resistor 565 and resistor 566..i hope that you can help me sir.from your subscriber in the Philippines thanks in advance sir.
Hi. I looked up the schematic for this amp and I couldn't find R565 and 566. Are you sure these are the correct numbers?
@@crashbandicoot4everr im very glad for your reply sir..the model of my amplifier is pioneer stereo amplifier model A-405
560 W JAPAN MFD.NOV.1999..sir im very sure the part number of the resistor R 565 and 566.. and the 565 are connected in series to negative output of right channel.speaker. the two said resistor is located near 10000 uf filter capacitor.. again thank you sir.
@@marcelinopagsanjan6959 Oh. I made a mistake. I was looking at the schematics for the A-405R. The A-405 (non-R) is a much newer and different model. Unfortunately I can't find any schematics for that model.
@@crashbandicoot4everr its ok sir..anyway im very much thankful for your effort to help me sir..God Bless .
I’m 39 and my glasses are like coke bottle bottoms.
Mine were too. -9 in one eye -6 in the other. Best 3000 I ever spent. 5 minutes under the laser. 20-20 vision.
Not the channel for this, but my thoughts are with you all in Canada
Don't worry about us, those numbskulls you see protesting do not represent the vast majority of the population.
The CUSTARD should contact customs & get money refunded, heres the evidence anyway.
Yes he can make a claim for refund after it is exported back to USA.
I check the box goods returned to USA when i ship back. Prior to pandemic i actually took a piece of equipment to the states to mail back and made the claim. Got back all but 10.00 but had to pay 10.00 to take across the line to mail. So it cost 20 and I got 40 back. Took about 3 months to get refund. Tried it a second time and got a letter denying the claim. So I don't do that now for anyone. They can do it on their end.
@@12voltvids Yes, its a hassle anyone could do without. A simple refund request like most paperwork we have to undertake on the Web, rob's a ridiculous amount of time from us all. As a 5 minute task spiral's into 1 hour task.
just buy another one? 40 bucks
Hello sir I'm indian