Can't say I've used it much. It doesn't work at all with the Studio G2 because the data is out of sync with the video. Other than the G2, I only use naked pocket cameras which require gyro data manipulation using Gyroflow so again it doesn't work with the built is stabilisation of Resolve :( Thank God for Gyroflow.
Hi, I have Halo RC and I can’t stabilize with Gyroflow. I followed your procedure but nothing works. What am I doing wrong? I also wanted to ask how I can update the firmware of the Micro Studio G2? Connecting to Blackmagic Camera Setup does nothing.
Hi. What HaloRC product do you have? If you mean my naked camera then watch this guide, th-cam.com/video/yJFVR7CbenY/w-d-xo.html Try turning on the camera whe you connect to the computer.
Hi. Sorry, but that doesn't really make sense. The cameras don't have profiles, the lens's do. If you can't find a lens profile for your lens on a G2, you can also use Pocket 4k UHD profiles too as it is the same.
I've been running with -53.25. That being said, I'm going to try with that multiple. That's a really smart thought of the offset being a multiple of the sensor read out. Thanks for that tip! FYI, you don't need to include any gyro data in your project file. The project file contains keyframes already. I'm actually going to be doing exactly this in my live stream tonight. Thanks for the confirmation that I have some semblance of a clue to knowing what I'm doing. ha! Thank, again, mate!
great vid, I'd like to see the original w/o gyroflow, and also the visual amount of applied stabelization! thx! maybe some few seconds where it really benefits!
@@Bludz thanks...I watched it... hard to even find the same position to compare... we need a side by side comparison, including the amount of lost screen resolution due to stabi... :) make a video! please! :)
How do you find the native gyro stabe within davinci performs?
Can't say I've used it much. It doesn't work at all with the Studio G2 because the data is out of sync with the video. Other than the G2, I only use naked pocket cameras which require gyro data manipulation using Gyroflow so again it doesn't work with the built is stabilisation of Resolve :( Thank God for Gyroflow.
Hey man! Congrats for the content. The correct lens profile for my laowa 7.5mm isn't in the gyroflow. How should I do? There's only laowa 7.5mm 1080
Just use Pocket 4K camera profiles, not G2 specifically. Same sensor :)
Hi, I have Halo RC and I can’t stabilize with Gyroflow. I followed your procedure but nothing works. What am I doing wrong?
I also wanted to ask how I can update the firmware of the Micro Studio G2? Connecting to Blackmagic Camera Setup does nothing.
Hi. What HaloRC product do you have? If you mean my naked camera then watch this guide, th-cam.com/video/yJFVR7CbenY/w-d-xo.html
Try turning on the camera whe you connect to the computer.
Where can I find the g2 profile in gyroflow?
Hi. Sorry, but that doesn't really make sense. The cameras don't have profiles, the lens's do. If you can't find a lens profile for your lens on a G2, you can also use Pocket 4k UHD profiles too as it is the same.
I've been running with -53.25. That being said, I'm going to try with that multiple. That's a really smart thought of the offset being a multiple of the sensor read out. Thanks for that tip! FYI, you don't need to include any gyro data in your project file. The project file contains keyframes already. I'm actually going to be doing exactly this in my live stream tonight. Thanks for the confirmation that I have some semblance of a clue to knowing what I'm doing. ha! Thank, again, mate!
Glad to help
@@Bludz Yup, for sure. Looks like -48.66 might be the magic number. I'm writing an app to calculate the offset but I think you're spot on!
Not just a pretty face, hahahaha
Hey! Can’t make it work with these settings. It makes footage even more shakey. What could be the problem?
Did you use the same lens profile I do in the video? Are you using a Studio G2 camera?
@@BludzYes, g2 but different lens. 7-14mm. But it seems the problem was that the IMU orientation had to be yXZ. Default was yxz. Capital lettering.
@@pulkpulk that's odd, I have not had to change that nor have I heard anyone else needing to. Thanks for the update.
@@pulkpulk thanks a lot, this also work for me
Is the gyro in the sensor or board?
Not sure mate, doesn't matter when it isn't naked.
@Bludz It's naked bmpcc4k and I can't stabilize any video, very shaky
This is a video for micro studio g2
th-cam.com/video/yJFVR7CbenY/w-d-xo.html
great vid, I'd like to see the original w/o gyroflow, and also the visual amount of applied stabelization! thx!
maybe some few seconds where it really benefits!
Thanks. Here's a comparison with and without gyroflow but not using this camera exactly, using a Pocket 4k, th-cam.com/video/zbaO-udF1gE/w-d-xo.html
@@Bludz thanks...I watched it... hard to even find the same position to compare... we need a side by side comparison, including the amount of lost screen resolution due to stabi... :) make a video! please! :)
Thank you very much. Nice tutorial. 😊
You're welcome 😊
Thank you SO MUCH!!!!! ❤ your the man
No problemo :)
great stuff man thank you
No problem 👍
#nostab, I just fly SMOOTH !
HAHAHAHAHA