Take note that when recitifying 120vac, it peeks at roughly 170v. The full bridge recitifyer output with a capacitor may be as high as 170v dc under low loads. Select components (like the capacitor) rated to withstand voltages higher than that. Ideally 25% to 50% more than 170vdc.
Very impressive on the induction heater!, please talk about your project in the beginning of your project(s) more! Also, Split your videos up into "1 project" videos... remember that "Search engines" work on titles. So, maybe consider: "Simple Invention: DIY Induction heater" as your title... or to get even more people "Melt Metal with DIY Induction Heater" and show the bright red wrench as the thumbnail and don't forget to add a conclusion at the end. great job!
Also, it wasn't obvious from the markings on the capacitor, but that cap is an Electrolytic Capacitor. Those must always be wired according to polarity or they will fail spectacularly.
*Mr.Electron Patreon's Page* - www.patreon.com/mrelectron
*Hindi Channel* - www.youtube.com/@Mr.ElectronHindi
*Alternator Channel* - www.youtube.com/@mrelectron_alternator
Take note that when recitifying 120vac, it peeks at roughly 170v. The full bridge recitifyer output with a capacitor may be as high as 170v dc under low loads. Select components (like the capacitor) rated to withstand voltages higher than that. Ideally 25% to 50% more than 170vdc.
شكرا لك
12:10. If you want to make that cut cleaner and avoid chipping, you should try adding tape over the surface before cutting.
Ok thanks
Very impressive on the induction heater!, please talk about your project in the beginning of your project(s) more! Also, Split your videos up into "1 project" videos... remember that "Search engines" work on titles. So, maybe consider: "Simple Invention: DIY Induction heater" as your title... or to get even more people "Melt Metal with DIY Induction Heater" and show the bright red wrench as the thumbnail and don't forget to add a conclusion at the end.
great job!
Also, it wasn't obvious from the markings on the capacitor, but that cap is an Electrolytic Capacitor. Those must always be wired according to polarity or they will fail spectacularly.
Where your home 🤔🤔🤔
India
🎉🎉🎉1.0000000.0000000❤❤❤❤
Minuto, 22:23 . Saca las pezuñas. Leches.
No dejas ver la etiqueta.
Pezuñas de burro NO son transparente.
Burracán