So, looking forward to the next tutorial series. Because I've been trying to learn how to make cars for over two years now. Keep up the awesome content Bro. 😊
One thing to point out: if you modify the graphics offset in the car.ini file you also have to alter the pickup heights in the same file and the colliders.ini file accordingly so that the ride height physics remain correct
Do they update the same amount or some specific method we’re able to follow? Just curious since if it affects the physics I’m assuming it’s more complex.
How can you instantly see your saved data files? Because when i edit data settings it doesnt change nothing, i need to close the showroom and then pack the data and then go back so i can see it.
Your car may have a data.acd file in it's folder in adition to the data folder. If that is the case, you need to remove the data.acd file. But ONLY after unpacking it to have a data folder, otherwise the car will no longer work.
Hey, when I tried the car out in game the wheels were flying around like crazy, but only the rear wheels, the front wheels were working perfectly. I followed every step and did not have any errors throughout the whole process. Do you have a fix for that?
i did your tutorial on changing wheels but i didnt try it when i did it and when i went into cm showroom i couldnt steer or change anything there it was like the wheel wasnt connected. and when i tried it the wheels didnt move can you help me?
hey, thanks for the vid! but kseditor is giving me an insanely hard time when trying to load the persistence (literally just crashes as soon as i click open)
Hello friend, Great tutorial, I only have one problem, after modifying the "suspension.ini" file and being able to view it in the showroom, when I enter the game, it is not modified, how can I fix this? (translator)
Hey, at first really great video thank you for uploading this! For me I just wanted to lower my GTI Clubsport S from 2016 and I did every single step you did and it looked exactly how I wanted and I saved everything but it didn't work it's the standard height do you have an idea what the problem is?
@fs22_24 @ZombieVisuals há 1 ano (editado) @boogiebk1 have you deleted the data.acd file? Because if not, that overwrites everything from inside the data folder.
Hey man, I’m loving your videos! They’re so well explained and easy to follow. I successfully swapped wheels on a car. The only issue I have is when I’m in free camera mode or tv camera in replay and the car is a certain distance away, the wheels suddenly change color or have some kind of texture over it. Any ideas on how to fix that or do these things happen sometimes? Also the cars gearshift stays on the road when applying and releasing throttle.
Hi. Lovley stuff!!! Would i be able to make show both external mirrors on the screen? Just like the back mirror situated on the center of the screen on the top. Cheers!!!!
hi, you haven´t changed the visual of the car, you have changed the setup when you modified the suspension.ini. You have to consider it. Else you can use the suspensions.ini graphic offsets
Hey man! I have this really specific issue that I can't seem to figure out. This video got me the closest to fixing it! The issue is when I steer, the wheels clip on the inside of the fenders. If I make the wheels smaller, it doesn't do it but the fitment is off. Any help would be lovely!
Hey! Thanks! Putting an FBX file wheel on a car is of course possible, but you'd need to create a new material an texture for it. It's quite a tiring process. Making a separate video for that is probably the easiest thing to do
So once the car is in Ks editor the windows on the car are bugged and like chrome from the outside of the car and the interior is gone but once i zoom in to the inside the interior is fine? any fixes
You need to set the glass objets to transparent again. Just right click them in the ks editor and on the bottom the first category, there's a thing called isTransparent. You need to set that to true
You need to resize the empties (wheel, suspension and sometimes cars have disc empties), then select these empties and hit ctrl + a and click scale, to apply the scale. You might then also have the change the wheel size in the tyres.ini file
You need to set the glass objets to transparent again. Just right click them in the ks editor and on the bottom the first category, there's a thing called isTransparent. You need to set that to true
Man pls make a tutorial how to do bodywork like lips, wings, fenders etc. in blender and transfer it into game. AC community needs it a lot. I always have problems with kseditor and there is 0 content on TH-cam how to do it in the right way.
So, looking forward to the next tutorial series. Because I've been trying to learn how to make cars for over two years now. Keep up the awesome content Bro. 😊
Hey! Thank you! Some stuff came up and I didn't really get to recording sadly, but I'll definitely try to get started today!
I swapped the wheels over but now whenever I try to adjust suspension specs nothing changes on the car itself, just in the files.
One thing to point out: if you modify the graphics offset in the car.ini file you also have to alter the pickup heights in the same file and the colliders.ini file accordingly so that the ride height physics remain correct
Do they update the same amount or some specific method we’re able to follow? Just curious since if it affects the physics I’m assuming it’s more complex.
best guides, thanks as always have learnt a ton!
Thanks papi works like a charm
thank you so much! Awesome tutorials for beginners! :)
DUDE. thank you so much.
Awesome tutorial you help me a lot my friend. Thank you.
why car looks different from CM showroom, any guess?
How can you instantly see your saved data files? Because when i edit data settings it doesnt change nothing, i need to close the showroom and then pack the data and then go back so i can see it.
remove the data from the car folder first.
Your car may have a data.acd file in it's folder in adition to the data folder. If that is the case, you need to remove the data.acd file. But ONLY after unpacking it to have a data folder, otherwise the car will no longer work.
Hey, when I tried the car out in game the wheels were flying around like crazy, but only the rear wheels, the front wheels were working perfectly. I followed every step and did not have any errors throughout the whole process. Do you have a fix for that?
Sounds like you got the real wheel objects still parented to the front wheel empties then ;)
Very good tuto thanks a lot
i did your tutorial on changing wheels but i didnt try it when i did it and when i went into cm showroom i couldnt steer or change anything there it was like the wheel wasnt connected. and when i tried it the wheels didnt move can you help me?
You might not have set the wheel empties as parents. Check that and if they are not, there's the issue :)
@@ZombieVisuals it’s maybe because the wheel was in the suspension tab but I’ll try again tomorrow😁
@@stakedz yeah the tyre, rim and brske disc must be in the wheel empty
@@ZombieVisuals yeah I think it was
when i go into the .ini folder and adjust something and hit control s nothing happens or changes
Mine is the same way, I have to start an actual race to notice any changes. My showroom won’t update and I can’t figure it out
@boogiebk1 @deanbellio186 Do you use the CM showroom? The normal AC showroom doesn't update it in real time, I don't think
@@ZombieVisuals yeah I'm using the CM showroom..
@@boogiesgarage have you deleted the data.acd file? Because if not, that overwrites everything from inside the data folder.
@@ZombieVisuals No I have not, maybe that is my issue lol, where is that file located? thank you!
hey, thanks for the vid! but kseditor is giving me an insanely hard time when trying to load the persistence (literally just crashes as soon as i click open)
Hello friend,
Great tutorial, I only have one problem, after modifying the "suspension.ini" file and being able to view it in the showroom, when I enter the game, it is not modified, how can I fix this?
(translator)
Hey, at first really great video thank you for uploading this! For me I just wanted to lower my GTI Clubsport S from 2016 and
I did every single step you did and it looked exactly how I wanted and I saved everything but it didn't work it's the standard
height do you have an idea what the problem is?
idk each time i click save,, it doesnt change anything
same
@fs22_24 @ZombieVisuals
há 1 ano (editado)
@boogiebk1 have you deleted the data.acd file? Because if not, that overwrites everything from inside the data folder.
Deleting the setup > camber section didn’t work for me, car still has bad fitment
Hey man, I’m loving your videos! They’re so well explained and easy to follow.
I successfully swapped wheels on a car. The only issue I have is when I’m in free camera mode or tv camera in replay and the car is a certain distance away, the wheels suddenly change color or have some kind of texture over it.
Any ideas on how to fix that or do these things happen sometimes?
Also the cars gearshift stays on the road when applying and releasing throttle.
Lods bug, delete all lods and edit lods.ini to correct
Hi. Lovley stuff!!!
Would i be able to make show both external mirrors on the screen? Just like the back mirror situated on the center of the screen on the top.
Cheers!!!!
I don't have these data folder and the pack data is grey, so I can't click on it. Any ideas?😅
The car might be encrypted, which means you can't edit it
so i swap gtr rims to little fitz, and resize them on blender, but when i go to assetto the rims still huge, how do i change it?
hi, you haven´t changed the visual of the car, you have changed the setup when you modified the suspension.ini. You have to consider it. Else you can use the suspensions.ini graphic offsets
How do i do offset? like bring wheels outwards or inwards?
wheels are perfect just on some cars the glass textures get messed with or interior textures
open the model in kseditor, right click the messed up texture and make sure in materials "transparent" = true
Hey man! I have this really specific issue that I can't seem to figure out. This video got me the closest to fixing it! The issue is when I steer, the wheels clip on the inside of the fenders. If I make the wheels smaller, it doesn't do it but the fitment is off. Any help would be lovely!
If you decease the size of the wheels in blender, you need to hit "Ctrl + A" and select "Apply Scale". That should do the trick ;)
Congratulations video is very well explained. Do you know how to put a wheel in .fbx on the car?
Hey! Thanks! Putting an FBX file wheel on a car is of course possible, but you'd need to create a new material an texture for it. It's quite a tiring process. Making a separate video for that is probably the easiest thing to do
how do ifix the missing interior?
Missing interior in cockpit view or when looking from the outside
So once the car is in Ks editor the windows on the car are bugged and like chrome from the outside of the car and the interior is gone but once i zoom in to the inside the interior is fine? any fixes
You need to set the glass objets to transparent again. Just right click them in the ks editor and on the bottom the first category, there's a thing called isTransparent. You need to set that to true
my brakes dont line up with the roter how do i fix that
Hallo,
befolge deine schritte aber sobald ich sachen im data ordner ändere zeigt sich keine änderung auch nach dem speicjern nicht?
Benutzt du den CM Showroom oder den normalen AC showroom?
@@ZombieVisuals Den CM Showroom, funktioniert aber nun :)
my wheels dont turn and spin, any fixes?
also the steering wheel is messed up
Then the empty for the wheel needs ro by rotated 90° on the x-Axis (make sure to rotate the wheel mesh back in place afterwards).
my headlights are gone, anyway to fix this?
how do i change the wheel z axis?
How do i change the wheel size so that there is no clipping when i slam the car
You need to resize the empties (wheel, suspension and sometimes cars have disc empties), then select these empties and hit ctrl + a and click scale, to apply the scale. You might then also have the change the wheel size in the tyres.ini file
Hey sorry to bother you again, but do you know why my interior stops working when i do wheel swaps or any other modifications?
You need to set the glass objets to transparent again. Just right click them in the ks editor and on the bottom the first category, there's a thing called isTransparent. You need to set that to true
@@ZombieVisuals Thank you so much, your really a life saver ❤
thx man
tnks
Everything is perfect but the camber and width doesn't change in-game
Man pls make a tutorial how to do bodywork like lips, wings, fenders etc. in blender and transfer it into game. AC community needs it a lot. I always have problems with kseditor and there is 0 content on TH-cam how to do it in the right way.
Hey! Yeah that's a good idea! Probably best to do that before a tutorial on a whole car lol
Unpack data button isn’t shoiwng
I get many errors when I start a race
They all say something about LODkn5
Go into the data folder, open the LOD.ini, delete everything but the fist thing and change the OUT to something like 10000. Should do the trick
This changes affect physics or only visuals?
doesnt work for me
Is there a way to adjust the track width of an individual wheel? [wider track-width on LF wheel, doens't affect RF for example]
Help my interior is bugged
Do you mean you can't see it through windows from the outside, or what exactly?