Im having terrible luck turning a dodge durango into a drift car from the wdt/gravy car physics. I follow these tutorials and either miss over something or what but my car keeps turning to shit and looking like a block of diamonds in showroom etc
At the bottom of the suspension file there is values for your suspension graphics offset. That should move them if they’ll are set correctly with the dummys
@@Rada yes 10 mins after posting this comment I went back and checked graphics preset and messed around for a while till I figured it out, thank you anyway tho!
Hey man, I just swapped VDC 3.0 physics into my s15, but when I try to drift in game I am unable to tune it manually through the game itself. Is there a way to fix that because I'm worried that I just screwed up my car 😓
Hey man, I had the same issue. Try going to the "About" tab located in the top right of Content Manager. Locate the version number, which can be found right below the Content Manager logo and three buttons. It should read as something like, "Version: 0.8.2467.39678 (x86)." All you need to do is click on that string of numbers multiple times, and Content Manager should prompt you to enable "developer mode." This worked for me, and I now have the button.
i did all that were shown in the vid and i have this error --------------------------- Unexpected error --------------------------- Unfortunately, Assetto Corsa has crashed. Some general tips that might help: • Try different car or track; • Reset CSP settings to default for a test; • Try a different version of CSP; • Verifying AC’s integrity might help if some files got damaged (it wouldn’t remove new cars or tracks). Your CSP version is 0.1.79. Detailed report “crash_20230312_131025.report” has saved in “Documents\Assetto Corsa\logs”. Would you like to see it? --------------------------- Да Нет ---------------------------
So this is how you rip other cars, change them and then encrypt them to the point that even a custom preview could not be generated? Well F done..... cccc just deleted your cars after trying to update previews and realizing that I am left with blue/pixelated silhouette of the car.... Even CM Showroom is unable to encrypt your car.... not to mention trying to change something with car setup..... shameless....
@@Rada but how???? I like both your Nisan and BMW and I am unable to do what you tried to teach us cause you locked them to the top....... and I did not say stealing just ripping, it might be also with permission ;)
@@Rada yeah and I am talking about unpacking data.acd! Also it is so locked that I am unable to even create a preview in CM.... let alone see car in CM Showroom.... what does it bring if I need to jump in to the game for every slight adjustments to the cars handling or stance? Nothing I dont have time for that sry. Otherwise awesome F cars man ;)
If there is no Data.acd in the files you don’t need to unpack the data. I assume your talking about the cars being crystallised? It’s so people don’t steal parts that I paid for
Error might have something to do with: 00007FF8BBD57625 (DWrite): (filename not available): DWriteCreateFactory 00007FF8BBD22362 (DWrite): (filename not available): DWriteCreateFactory 00007FF8BBD1F8DA (DWrite): (filename not available): DWriteCreateFactory AC\splashscreen.cpp (319): SplashScreen::postRender AC\game.cpp (181): Game::onIdle AC\game.cpp (210): Game::run AC\acs.cpp (477): wWinMain f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c (618): __tmainCRTStartup 00007FF94F397374 (KERNEL32): (filename not available): BaseThreadInitThunk 00007FF9504FCC91 (ntdll): (filename not available): RtlUserThreadStart. i got this error after i did this what now
Thank you now i can turn my BA Falcon into a drift car
Aye w!
I have done all the steps trying to add vdc physics to a bmw m5 swap looks like went good but car doesn’t want to move
And I also don’t have any pits adjustments for the car how can I add them to the car ?
Im having terrible luck turning a dodge durango into a drift car from the wdt/gravy car physics. I follow these tutorials and either miss over something or what but my car keeps turning to shit and looking like a block of diamonds in showroom etc
Your car looks like that in showroom because the base model or base mod is encrypted
I appreciate this video so much very well explained helped me out a lot man I was loosing my damn mind lmao
Thanks bro means a lot 😁
Great vid tutorial!i followed everything but there is no engine sound… 😂
You can just change that in content manager
Think you forgot to swap the setup file over from the car used for physics
I did 😂 I’ll pin a comment tonight.
everything works with my swap but my rear calipers and brake pads are further out than my rims are phasing through, any knowledge?
At the bottom of the suspension file there is values for your suspension graphics offset. That should move them if they’ll are set correctly with the dummys
@@Rada yes 10 mins after posting this comment I went back and checked graphics preset and messed around for a while till I figured it out, thank you anyway tho!
i did everything but it dosent drive like the car i took the original physics from
In what way
@@Rada never mind my friend helped me out
Hey man, I just swapped VDC 3.0 physics into my s15, but when I try to drift in game I am unable to tune it manually through the game itself. Is there a way to fix that because I'm worried that I just screwed up my car 😓
Drag your setup file over aswell
@@Rada I don't follow? What do u mean?
@@Rada OH I see now! Thanks for coming in clutch!
some cars don't drive after modification, what can it be?
Like tuning?
no like wont go into gear its stuck in Neutral @@Rada
Hey, what should i do if i dont have unpack data button
It should be there by default in content manager. If it’s not clickable see if the data folder is already unpacked in the folder of the car.
Hey man, I had the same issue. Try going to the "About" tab located in the top right of Content Manager. Locate the version number, which can be found right below the Content Manager logo and three buttons. It should read as something like, "Version: 0.8.2467.39678 (x86)." All you need to do is click on that string of numbers multiple times, and Content Manager should prompt you to enable "developer mode." This worked for me, and I now have the button.
1:39 where did all of these files come from? you literally just made that folder
Can I put any data onto any car?
when I did all the actions, the car stopped driving, just "float" on the map and the wheels do not move how to fix this please tell me?
same here
@@chrismikhaili3426 most likely the matter is in the model of the car itself, it worked on another
@@hassletale3695 very possible, although I fixed the issue by not messing with the tyres.ini
i did all that were shown in the vid and i have this error ---------------------------
Unexpected error
---------------------------
Unfortunately, Assetto Corsa has crashed.
Some general tips that might help:
• Try different car or track;
• Reset CSP settings to default for a test;
• Try a different version of CSP;
• Verifying AC’s integrity might help if some files got damaged (it wouldn’t remove new cars or tracks).
Your CSP version is 0.1.79. Detailed report “crash_20230312_131025.report” has saved in “Documents\Assetto Corsa\logs”. Would you like to see it?
---------------------------
Да Нет
---------------------------
Is there a error file after you close out of that screen?
this background lol
😂
eyoooo it ya boyyy radaaaaaaaaaaaaaaaaaaaaaa
Ayooooo 😂
waaaayyy too much work
Isn’t even that much work lol
So this is how you rip other cars, change them and then encrypt them to the point that even a custom preview could not be generated? Well F done..... cccc just deleted your cars after trying to update previews and realizing that I am left with blue/pixelated silhouette of the car.... Even CM Showroom is unable to encrypt your car.... not to mention trying to change something with car setup..... shameless....
This has nothing to do with stealing other people’s cars 😂 just simply making a car feel like a car you like driving more
@@Rada but how???? I like both your Nisan and BMW and I am unable to do what you tried to teach us cause you locked them to the top....... and I did not say stealing just ripping, it might be also with permission ;)
Unpacking data and unpacking a model are 2 different things
@@Rada yeah and I am talking about unpacking data.acd! Also it is so locked that I am unable to even create a preview in CM.... let alone see car in CM Showroom.... what does it bring if I need to jump in to the game for every slight adjustments to the cars handling or stance? Nothing I dont have time for that sry. Otherwise awesome F cars man ;)
If there is no Data.acd in the files you don’t need to unpack the data. I assume your talking about the cars being crystallised? It’s so people don’t steal parts that I paid for
Error might have something to do with:
00007FF8BBD57625 (DWrite): (filename not available): DWriteCreateFactory
00007FF8BBD22362 (DWrite): (filename not available): DWriteCreateFactory
00007FF8BBD1F8DA (DWrite): (filename not available): DWriteCreateFactory
AC\splashscreen.cpp (319): SplashScreen::postRender
AC\game.cpp (181): Game::onIdle
AC\game.cpp (210): Game::run
AC\acs.cpp (477): wWinMain
f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c (618): __tmainCRTStartup
00007FF94F397374 (KERNEL32): (filename not available): BaseThreadInitThunk
00007FF9504FCC91 (ntdll): (filename not available): RtlUserThreadStart.
i got this error after i did this what now