I need multi output from M.S. Teams. What is the best way to isolate the audio from individual callers so that I can send to a mixing board as individual iso channels?
Even with following closely your instructions and watching multiple videos, I'm still getting a horrible echo in my headphones. I've adjusted the headphone settings with no success. I have multiple questions and would lime to set up a consultation for you or your team to help me get my setup ready. Do you still do this and if so, how do I contact you to set an appointment? I don't see a website or contact info on your channel or description. Thanks!
Thanks for doing this. Could you continue on with the desktop capture of the Teams video in to vMix, and how you would then send the output back out, say to Live Event?
I did this today actually. I used desktop capture on the machine running Teams and then brought that into VMIX via NDI. Worked very well. I did have to shutdown the s/w firewalls and antivirus though.
Great Video need to get my head around this I have a PC running Vmix and a Mac running Teams ; all good so far, finding all the team participants. In vMix Output can not be seen as virtual Camera on Teams on Mac so I have route it with OBS for Mac for some reason be great if there is a solution to this. Now the the Audio part : vmix will play a video with audio followed to a 4 participants team call. The participants on teams need to hear see and hear the video and obviously be able to hear each with duplicating or hearing their voices - In you guidance , I have followed your steps in Vmix I have created a BUS A , VB cable A as well created an audio input VB Cable B on my Mac Teams settings I have Speaker as VB Cable B and Microphone VB Cable A - Can you please explain the simplest routing for the participants to hear the audio of the video and be in conversation without duplication of audio as well as would I need to create an additional audio input in Vmix for my microphone as my teams microphone is no longer available as its being routed. Thanks StreamGeeks you are best !!
Hi, thanks for this video. I have this exact setup. My problem is when I'm sending my microphone input from vmix to teams, and want to listen back on the audio input from teams there is a slight delay on my voice. It is only me who her this, but it makes it almost impossible for me to talk with this delay. Is there a way to get this delay away
You actually just want to turn down the headphone monitoring for your own voice. It’s done in the audio area for your microphone input. Just click the little headphone button
Greetings. I'm seeking some assistance. I have a weekly sports talkshow programme that I stream on StreamYard. However, I was asked if I could simulcast, but the broadcaster wants to use vMix. Do you know how I could integrate StreamYard with vMix? Is there anyway I could continue with StreamYard and integrate vMix, probably using a second computer, etc? Any suggestions would be appreciated. Thanks in advance for your help.
I want to bring multiple teams guests into vmix via ndi. But the audio routing is whats causing me headaches. I just want all the teams audio to come into vmix but for them not to be able to hear themselves twice. Whats the best way to do this?
Hi, thanks for the video. I'm using VMix for hybrid versions of zoom & teams meetings. where I activate virtual audio cable to add audio input to teams or zoom at the same time master output for the physical audience. Recently I'm facing a trouble when I use ms Teams, that when I activate M (master) it cut the sounds for ms teams (bus A). again when I deselect M, can hear audio from ms teams. With zoom it works fine with both ways. anyone else faced the same thing? appreciate if anyone who solved this can help me. TIA
Hey there. A big thanks. This video just perfect to explain how to output vmix into Teams. Great work. Thanks.
thanks
Thanks for the video
And How is the Workflow for this same project in Wirecast because i have a loop with the audio
….
Thank you so much.
I need multi output from M.S. Teams. What is the best way to isolate the audio from individual callers so that I can send to a mixing board as individual iso channels?
Even with following closely your instructions and watching multiple videos, I'm still getting a horrible echo in my headphones. I've adjusted the headphone settings with no success. I have multiple questions and would lime to set up a consultation for you or your team to help me get my setup ready. Do you still do this and if so, how do I contact you to set an appointment? I don't see a website or contact info on your channel or description. Thanks!
Thanks for doing this. Could you continue on with the desktop capture of the Teams video in to vMix, and how you would then send the output back out, say to Live Event?
I did this today actually. I used desktop capture on the machine running Teams and then brought that into VMIX via NDI. Worked very well. I did have to shutdown the s/w firewalls and antivirus though.
Great Video need to get my head around this I have a PC running Vmix and a Mac running Teams ; all good so far, finding all the team participants. In vMix Output can not be seen as virtual Camera on Teams on Mac so I have route it with OBS for Mac for some reason be great if there is a solution to this. Now the the Audio part : vmix will play a video with audio followed to a 4 participants team call. The participants on teams need to hear see and hear the video and obviously be able to hear each with duplicating or hearing their voices - In you guidance , I have followed your steps in Vmix I have created a BUS A , VB cable A as well created an audio input VB Cable B on my Mac Teams settings I have Speaker as VB Cable B and Microphone VB Cable A - Can you please explain the simplest routing for the participants to hear the audio of the video and be in conversation without duplication of audio as well as would I need to create an additional audio input in Vmix for my microphone as my teams microphone is no longer available as its being routed. Thanks StreamGeeks you are best !!
microsoft teams have ndi function we can use ndi source to obs as well with individual participant video separately switch
Hey thanks, buddy But I have a big problem with your video all so. what happens to the video in team its mirror .Please explane it
Yeah seriously are we supposed to not use lower thirds or what? Plus slides will come out mirrored.
Hi, thanks for this video. I have this exact setup. My problem is when I'm sending my microphone input from vmix to teams, and want to listen back on the audio input from teams there is a slight delay on my voice. It is only me who her this, but it makes it almost impossible for me to talk with this delay. Is there a way to get this delay away
You actually just want to turn down the headphone monitoring for your own voice. It’s done in the audio area for your microphone input. Just click the little headphone button
Greetings. I'm seeking some assistance.
I have a weekly sports talkshow programme that I stream on StreamYard. However, I was asked if I could simulcast, but the broadcaster wants to use vMix.
Do you know how I could integrate StreamYard with vMix?
Is there anyway I could continue with StreamYard and integrate vMix, probably using a second computer, etc?
Any suggestions would be appreciated.
Thanks in advance for your help.
Yes I can Help you
I want to bring multiple teams guests into vmix via ndi. But the audio routing is whats causing me headaches. I just want all the teams audio to come into vmix but for them not to be able to hear themselves twice. Whats the best way to do this?
This tutorial is with virtual audio cables using one computer. Vmix has a nice NDI tutorial that shows what you are asking
It shows that ndi is not supported in the setting of team app. Please help
Please make a tutorial on how we can connect Vmix to Webex using Vmix Call.
Vmix Call Host can talk to attendees from Webex without an echo.
vMix call does not work with WebEx. You need to choose one or the other. You can follow the steps in the video to connect WebEX to vMix.
Hi, thanks for the video. I'm using VMix for hybrid versions of zoom & teams meetings. where I activate virtual audio cable to add audio input to teams or zoom at the same time master output for the physical audience. Recently I'm facing a trouble when I use ms Teams, that when I activate M (master) it cut the sounds for ms teams (bus A). again when I deselect M, can hear audio from ms teams.
With zoom it works fine with both ways. anyone else faced the same thing? appreciate if anyone who solved this can help me. TIA
Virtual audio cables are unreliable, you should use a USB Audio Interface Box.
#roblox
microsoft teams have ndi function we can use ndi source to obs as well with individual participant video separately switch
It shows that ndi is not supported in the team app please help