Get something like P&S finisher. Just spray it on, wipe off excess if there is any with a microfiber towel and that should do it. It’ll neutralize any residual cleaner from reactivating
Great question. I wouldn’t use APC on protected vehicle due to the chemical eating and removing wax away. A dedicated Pre snow foam will be best if vehicle is dirty and needs extra cleaning power.
@@hydromobiledetailing i actually wanted to know if this dilution IS strong enough and safe enough to use as a strip wash for sealants, waxes, and ceramics? Can i go stronger, agitation? Pressure wash? Do you have a green star dilution and wash method for a definitive strip wash?
Hello! I want to do my interior but don’t know how to dilute it, in 1:20 is that 100ml of GS for 2000ml of water ? Thanks a lot 🙏
Can I do this with Megiuars All Purpose CleanerV
yea, maybe dilute it to 1:20 for interior because its really strong
Yes, follow their dilution recommendations.
Dilute 1:10 or 1:15 and use distilled water, it's a harsh chemical
With use on carpets. How would you neutralise the product once wiped away.
Battery acid
Get something like P&S finisher. Just spray it on, wipe off excess if there is any with a microfiber towel and that should do it. It’ll neutralize any residual cleaner from reactivating
Can we use cleaning for engine bay?
Yes you can
Should this only be used on paint? What about trim, windows and what not
Works in all you mentioned. Just don’t let it dry and work in shade.
My car has ceramic coating it’s safe to use it on it? Because my car has stubborn dirt from rains
Try a shampoo with high ph Level such as CarPro Lift. Green star may remove coating.
If 10:1 green star removes your coating, never use it again
fax its safe for coatings i dont know what this foo is talking about
@@Jefferson11169
Green star 🐐
Yup 👍🏻
For wheels 1:5 works fine
Yes 1:5 works great for wheels.
Can I use this for carpet/upholstery extraction
Yes you can.
Great for bugs, road film, and light tar, and super safe on paint all at the same time. One of the best
You got it 😀 thanks for sharing.
What do I dilute it to for road film bugs and light tar
@@djtouch621 I'd start at 10:1 and increase strength as needed up to 5:1. It will strip waxes and diminish paint sealants at higher concentrations.
I was gonna do 10.1 in my 32 Oz spray bottle but I see ppl doing 1:20 if I go ahead at 10.1 it will be safe on wax and sealants for a pre wash
What about in a 2 gallon IK e-foam? (Electric foamer)
For 1:10 ratio in a IK Foamer it will be 23oz green star / 233 oz water 👍🏻
Can I use it anywhere in the interior?
Yes. Dilute to 1:20 for interior 😀
What is that ratio in a 32oz sprayer im so confused
@@gigachad4211 32oz at 10:1
you’ll need 3oz of Green Star and 29oz of water.
What dilution would you use for exterior so wax/sealants/coatings work get damaged ?
Great question. I wouldn’t use APC on protected vehicle due to the chemical eating and removing wax away. A dedicated Pre snow foam will be best if vehicle is dirty and needs extra cleaning power.
You think it will damage ceramic coatings? 10.1?
Their “gentle snow foam” will be the one you are looking for.
@@hydromobiledetailing i actually wanted to know if this dilution IS strong enough and safe enough to use as a strip wash for sealants, waxes, and ceramics? Can i go stronger, agitation? Pressure wash? Do you have a green star dilution and wash method for a definitive strip wash?