Just wanted to say while I ignore/skip most ads and endorsements, I'm glad I caught a moment of MakeByMe on this video which was enough to tune me in for the whole segment as it is EXACTLY what I've been needing for planning my work. I don't have the time/patience/motivation to become a 3D modeler / CAD designer, but this tool is basically intuitive enough I designed my kid's bed in about an hour and I'm going to be using it so much from now on, including my new workbench which will incorporate some of your features here. This is fantastic, thanks for sharing.
I came here to say that I finished making this (with a fixed top) last weekend! It went well. I struggled with getting the bottom shelf to fit (even with 1 frame side removed) and due to some slightly warped lumber, my drawer openings werent completely square, but the drawers work great and the whole thing is incredibly sturdy and easy to move around! Cant wait to make my next projects on it! I'll probably make some modifications over time to increase tool/accessory storage, but the drawer space is amazing.
Best simple, versatile and useful design I've seen yet. One small change to consider. When you flip the top overto the extensions you have no support for the center of the top. Run a connecting piece between the arms to support it!
The flip top is great! Just what I need in my tiny, tiny outdoor space. I won't be doing drawers on the bottom, but will add a tool space below the top.
I like the flip top. I used the collapsible aluminum shelf brackets to increase the work surface, but they are pretty weak. Your mechanism is way better.
Mobile with storage is the way to go. The flip top is a nice touch too. Lol I have a half dozen benches and will be doing a mobile one with lots of drawers soon. Can’t beat rolling it out in the driveway and then using a leaf blower for clean up. 👍
Shara, once again you present us with a video about what appears to be a simple project but is full of useful content and ideas. I've already signed up for MakeByMe and I am looking forward to exploring that program. My temperature gauge I bought for $12 dollars says it's 105 degrees right now in my shop. So your video cheered me up quite a bit, especially the part where Bubby makes an entrance and later when Lucy and Bubby settle in to watch your labors. I think I'll avoid the heat for a while and piddle around with MakeByMe as I'm calmed by the soft purr of our air conditioner. I love that flip top lid. Great idea. Hmmmm..... Thanks for Sharing! 🙃🙂
This workbench looks great Shara. And the middle shelf under construction is a clever idea. First the CNC machine haves a straight and stable surface to sit on. Because if the CNC machine can vibrate, the results show some of this vibrations on the finished product and you have more to sand later. And second the CNC machine is up higher and you can store all the hold downs, cutting bits and other CHN stuf in them. As always, a well planed and built project. Looking forward to the first CNC project. You are great, thank you for sharing this!! 🥰
Thanks so much! I didn’t want to “waste” valuable working space with a CNC so this allows me to use the top for other things, but still store the CNC out of the way. I can’t wait to get it assembled and learn how to use it. Thanks so much for watching and I hope you have a great weekend!
Really nice build. Very simple design, easy to adapt to whatever needs someone might have. I see so many options on how to adapt and build on your ideas. For example, doubling up on the top surface, so that you either have a double sheet workbench, or can fold it out for a double size surface. If you then build the whole thing only have the size (around 1x1m) you can get a large workbench on a very small footprint. You could even have integrate a table saw or router etc it. As long as you remember to lower the blade/bit, you can still fold it shut, but you have a large outfeed. Many many options. Cool!
Drawers in a work bench is always nice,.. extra storage. Flip top for extra space, and does not take more room when not in use is a great idea. Thanks for sharing Ms. Shara
Bubby is too cool for school! He's always their to lend a helping paw😂. Really awesome Mobile work bench! Adding those caster wheels was a great idea for sure, and the flip top just doubled your work space area.🤙🏾💯
I really like your channel I’m actually starting my woodworking business and I like how you explain the work process and using simple stuff for a diy person or a person who’s beginning at woodworking your awesome keep up the good work hopefully one day I will be there at your level!!
Thank you! I didn’t add drawers into my old workbench and it’s something I feel like I could definitely have used for small parts to keep things better organized. So this time, drawers were a must have! Thanks so much for watching! I hope you have a great weekend!
You are my idol.. I always thought I wanted to give up on my interest in the field of furniture making and upholstery. But when I see your TH-cam it gives me the motivation to continue my interest. thank you❤
Thank you for the simple instructions and the link to the software. Glad you included a representative of the inventors of the internet - can never have too much cat.
Love how practical, clear, and concise your videos are! Shara, suggest letting the miter saw stop spinning before you lift it from the workpiece. Eliminates the risk of it catching the cutoff and propelling it.
The help was helpful this build 🤣 I’m glad they hung out with me while I was working. Thanks so much for watching and I hope you have a great weekend! 🙌
Great build and thanks for the info on the design software! I like your tip on placing the casters diagonally to avoid screwing into all end grain. I wouldn't have thought of that. It was nice to see you had so much help from Lucy and Bubby for this build. That Bubby seems to always want to be in the middle of everything you're doing. He is such a wonderful companion to keep you company while working in the shop.
That’s a sweet design if you used a second top to double the work area, instead of having an open hole for your cnc machine that is! Very cool video thank you
Nice job. I wish I had seen this before I built my workbench. One thing, I'm old. I put my storage shelves under the top so I don't have to bend over as much. There is still a shelf at the bottom for larger items, and to provide stability.
Shara, great design and build project! I have a Portable Workbench in my garage shop, but not,any drawers, which I liked in your Workbench. Well done, Shara!
I never check out the sponsors for any video, but Make by Me is actually a really cool product! Super easy to use and perfect for people like me designing pretty basic stuff. Always love your designs!
Checking out those sponsors' links helps keep the makers sponsored; always check them out, even if that means clicking and leaving immediately. It matters.
I joined and am disappointed.. Took forever to load and very slow response time.. Perhaps because I'm in South Africa and not the States - not sure. I did like the fact that I could change measurements from "inches" to metric - that's a very cool feature. Will try it again and hopefully not experience the "lag" - I do think it would be a cool tool to have in my arsenal.
I have a cnc and it’s been sitting for almost 3yrs. I am from Lake Charles,Louisiana, we had some bad storms. I wanna learned how to us mine, if you could make some videos on that I would appreciate it. I’ve learned how to cut and wanna learn my cnc. Awesome video, I can’t wait to see a cnc video tutorial for newbie’s.
Thank you so much for the detailed directions on makebyme super helpful. Never made a workbench before or drawers for that matter. It turned out great and learned so much in the process. Thanks again!
Having your 2 mates in there for supervision must make the days nicer :). Something I sorely miss in the shop nowadays. Clever way to sort your CNC too Shara - easy against a wall or to flip if you want the table :) How do you think it will go in regard to vibration and such? I think you may need breaks on the wheels to prevent the motor inertia causing wobbling? I don't imagine it will cause accuracy issues but vibration, chatter and such can be a pain in unforseen ways!
You are great!Woodwork has always been intimidating for me. This was also fuel by woodwork being for boys when i was growing up. But I need the cute things you make!!!😍😍😍
My shop is almost always a disaster. I clean it up and it stays that way for approximately 5 minutes before it’s a wreck again 🤣 it’s a never ending cycle
Hi Shara, I am glad to see you are still thriving. I am finally ready to have a go at making your 2 drawer filing cabinet. I may try to make it 3 drawer. I finally found out how to get the information on your plans. I can now have a go at doing this at a local community workshop where they tools etc. Best regards, Joan (London, England).
Great job! You gave me a good idea with the folding top, since I have small space at my shop, I will add some wings to the side of my workbench to make it bigger when working with 4x8s but only when I need it. Thanks!
You could totally double up the top. Attach the bottom one and add the top one with the piano hinge to fold the top over to double the size. If I didn’t add this specifically for access to the inside, I would have loved to do the “double size”idea.
Your instructions are clear, your video work is very good and I love the pet cameo's. Thanks for this information - first this table, then onto the walk-in closet. Fingers crossed it looks as good as yours.
Very handy workbench! I need about 5 of these for my auto repair shop ( my daily grind, woodworking is my hobby😊). Thanks for the info on MakeByMe. That looks like a good "tool" to have. I'll keep that in mind incase you don't already have a plan for something I need to build 😊. As always, have a great weekend!
A classic Shara build with plywood, 2x's, and pocket hole joinery? Yes please! This is very practical and the basic idea is adaptable to many potential uses. I love your idea for having the fliptop capability just for good access to the lower shelf, but as you touched on, as long as you have something fairly bulky (like a CNC) on the bottom shelf, you could indeed use the top in the open position (with a little strategic reinforcement) without worrying about tipping. As a fluent speaker of "canine," allow me to translate at 5:15 ... "Mom, when are you gonna air condition this place?"🥵😆
It’s definitely a classic 🤣 I’m glad you enjoy my “style” of basic build! This could be used in so many ways. I want to build a couple of these to replace my old workbench too 🙈 maybe one day haha. And I believe you are right. Lucy would vote for AC BUT if she knew that would mean the doors have to be closed while we work, I think she might have second thoughts 🤣 she has her own personal fan and gets frequent snack breaks inside 😉
Shara. Both your designs and presentations are fantastic! Suggestion / request... I'm hoping for your take on basic, "farm style" DINING ARM CHAIRS. 🙏 Thanks so much!
A very simple but thorough video cabinet build. So many videos leave out the small steps that leave you guessing about the build at some point. Nice touch with your pets... Will be following your channel...
Nice. I need to build one of these but not as deep front to back... I like the hinged top too. I'm thinking I'd some means of having those two hinged supports secured to the table - maybe just some hook latches or magnets?
Yeah I was going to get two gate latches to secure the supports. I just haven’t got around to it yet haha. The hinges are pretty tight so they don’t really fling out when moving it, but over time and with some use, they’re likely loosen up and need something to hold them shut.
Nice workbench Shara! I like the project software that you introduced with this build. It looks very useful. The folding bench top is a great idea. Bubby sure was interested! Lol…. Lucy, in her refined way, just supervised! Keep on building! Have a great weekend!
Thank you! I always appreciate you watching and following along! Bubby and Lucy make working in the shop tons more fun. I’m always appreciative of their company haha. I hope you have a wonderful weekend and thanks again for watching!
4:48 😂😂❤ 6:47 I really thought you were going to try bottom mount slides here. But maybe I've just been watching too much Bourbon Moth lately. 😊 12:28 This is so epic! Not too complicated and functionality is top notch! 10/10 Shara, you keep finding ways to out do yourself. 😁
Excellent build my friend!⭐⭐⭐⭐⭐ You are starting make me wish I had built a workshop instead of a music studio LOL. When I retire I am planning to start building again :). Thanks for sharing your fantastic skills and knowledge!
You’re making me wish I had built a music studio vs a workshop haha. Music is often more fun than sawdust 🙌 I appreciate you following along and I hope you have a wonderful weekend!
Thanks for the build/design software. It sure looks fairly easy to learn and work with. How do you keep things from "walking" a bit then driving screws in the pocket holes? My projects seem to drift just a wee bit as I drive the screw in. Lucy didn't seem to enthused about being on camera. lol And Bubby... well he was just telling you that it was break time. Thanks for the bench idea, I'm sure it will come in handy. Until next time. saw safe.
Great build. I don’t normally watch this kind of video but since I plan on building a work bench soon I watched this one. I was impressed. I will be referencing this video when I build mine. Thank you for doing this video. Great job! 👍🏼
I really wish i could search past comments cause i feel like im about to ask teh same question, or i wasnt paying attention. Is it "Make By Me" or "Home By Me". New to wood working and i started on small projects. Graduating to larger projects. Sharah you gave me the confidence to do so with your tips.
Hi! MakeByMe is made by HomeByMe. HomeByMe is a broader program for larger designs. MakeByMe is a branch off made specifically for smaller projects like furniture. The link to MakeByMe is in the description to take you to it directly 😊
Alright Shara, where are they?! The cameras…where are they?? 😉. I swear woman, you must have a view into my house and work area, because you continue to make things that I either need now, or have been needing to make for a long time!!! Soooo, where’s the cameras?!? 😊 All jokes aside, this is a really cool work bench. One that I haven’t seen from anyone else either, and trust me, I’ve been looking. (Oh never mind, you already know that from the cams!). But your flip top bench is a new one on me. I was thinking at first you were going to make a double thick top, so when you flipped it open, you’d have like an 8’x8’ work area, especially since you have the room for it, but I think I like this way better. (Oh, and don’t think I wasn’t waiting on the struggle bus on the lower shelf once I saw you had the frame together! I only know that though due to my own mishaps!)
Hi thank you for your video it’s brilliant and I’d love to make one. Could you please send me link for plans and the size of the legs please. I can’t seem to find them.
Just wanted to say while I ignore/skip most ads and endorsements, I'm glad I caught a moment of MakeByMe on this video which was enough to tune me in for the whole segment as it is EXACTLY what I've been needing for planning my work. I don't have the time/patience/motivation to become a 3D modeler / CAD designer, but this tool is basically intuitive enough I designed my kid's bed in about an hour and I'm going to be using it so much from now on, including my new workbench which will incorporate some of your features here. This is fantastic, thanks for sharing.
This is my favorite type of project: a piece that perfectly meets your needs while being unobtainable elsewhere.
It makes me ask myself what I want.
Out of all the diy portable/expandable work benches I've watched looking for the right one to build, I just found the best! Thanks!
Ahh I love that. So glad you enjoyed it and THANK YOU. Happy building! 🙌
@@WoodshopDiaries😊😊😊😅😊😅😅
This one seems doable for a beginner!
I came here to say that I finished making this (with a fixed top) last weekend! It went well. I struggled with getting the bottom shelf to fit (even with 1 frame side removed) and due to some slightly warped lumber, my drawer openings werent completely square, but the drawers work great and the whole thing is incredibly sturdy and easy to move around! Cant wait to make my next projects on it!
I'll probably make some modifications over time to increase tool/accessory storage, but the drawer space is amazing.
Yay! No Festool bling. 💪🏾. And thanks a million for this tutorial. These look feasible for even the beginning woodworker. 👏🏾
Best simple, versatile and useful design I've seen yet.
One small change to consider. When you flip the top overto the extensions you have no support for the center of the top. Run a connecting piece between the arms to support it!
The flip top is great! Just what I need in my tiny, tiny outdoor space. I won't be doing drawers on the bottom, but will add a tool space below the top.
I like the flip top. I used the collapsible aluminum shelf brackets to increase the work surface, but they are pretty weak. Your mechanism is way better.
Ms. Ma'am, chef's kiss. ❤simple and functional👏🏽
Mobile with storage is the way to go. The flip top is a nice touch too. Lol I have a half dozen benches and will be doing a mobile one with lots of drawers soon. Can’t beat rolling it out in the driveway and then using a leaf blower for clean up. 👍
Shara, once again you present us with a video about what appears to be a simple project but is full of useful content and ideas. I've already signed up for MakeByMe and I am looking forward to exploring that program. My temperature gauge I bought for $12 dollars says it's 105 degrees right now in my shop. So your video cheered me up quite a bit, especially the part where Bubby makes an entrance and later when Lucy and Bubby settle in to watch your labors. I think I'll avoid the heat for a while and piddle around with MakeByMe as I'm calmed by the soft purr of our air conditioner. I love that flip top lid. Great idea. Hmmmm..... Thanks for Sharing! 🙃🙂
Saludos desde Costa Rica pura vida bendiciones exelente trabajo y las medidas 😊
This workbench looks great Shara. And the middle shelf under construction is a clever idea. First the CNC machine haves a straight and stable surface to sit on. Because if the CNC machine can vibrate, the results show some of this vibrations on the finished product and you have more to sand later. And second the CNC machine is up higher and you can store all the hold downs, cutting bits and other CHN stuf in them. As always, a well planed and built project. Looking forward to the first CNC project. You are great, thank you for sharing this!! 🥰
Thanks so much! I didn’t want to “waste” valuable working space with a CNC so this allows me to use the top for other things, but still store the CNC out of the way. I can’t wait to get it assembled and learn how to use it. Thanks so much for watching and I hope you have a great weekend!
Really nice build. Very simple design, easy to adapt to whatever needs someone might have.
I see so many options on how to adapt and build on your ideas. For example, doubling up on the top surface, so that you either have a double sheet workbench, or can fold it out for a double size surface. If you then build the whole thing only have the size (around 1x1m) you can get a large workbench on a very small footprint.
You could even have integrate a table saw or router etc it. As long as you remember to lower the blade/bit, you can still fold it shut, but you have a large outfeed.
Many many options. Cool!
Drawers in a work bench is always nice,.. extra storage. Flip top for extra space, and does not take more room when not in use is a great idea.
Thanks for sharing Ms. Shara
Bubby is too cool for school! He's always their to lend a helping paw😂. Really awesome Mobile work bench! Adding those caster wheels was a great idea for sure, and the flip top just doubled your work space area.🤙🏾💯
I really like your channel I’m actually starting my woodworking business and I like how you explain the work process and using simple stuff for a diy person or a person who’s beginning at woodworking your awesome keep up the good work hopefully one day I will be there at your level!!
The bench looks really good and with the four drawers you have a lot of storage. Thanks for sharing this and the MakeByMe program.
Thank you! I didn’t add drawers into my old workbench and it’s something I feel like I could definitely have used for small parts to keep things better organized. So this time, drawers were a must have! Thanks so much for watching! I hope you have a great weekend!
You are my idol.. I always thought I wanted to give up on my interest in the field of furniture making and upholstery. But when I see your TH-cam it gives me the motivation to continue my interest. thank you❤
Great build! Love your outfits, I'm interested in the black sneakers at the end of the video - can you give us a buy source?
Thank You for being a real Woodworking Human😘
Thank you for the simple instructions and the link to the software. Glad you included a representative of the inventors of the internet - can never have too much cat.
The flip-open feature is amazing!
Some magnates for those braces for the top would work great for keeping them in place. Great project Thanks for sharing.
Love how practical, clear, and concise your videos are! Shara, suggest letting the miter saw stop spinning before you lift it from the workpiece. Eliminates the risk of it catching the cutoff and propelling it.
Thanks so much for watching! I’m glad you enjoy the videos 😊
Good morning Shara, very nice design. Can't wait to see what you do with the cnc. Glad to see all the help showed up today 😀. Have a great day!
The help was helpful this build 🤣 I’m glad they hung out with me while I was working. Thanks so much for watching and I hope you have a great weekend! 🙌
How am I just now seeing this...wow! so perfect!
Great build and thanks for the info on the design software! I like your tip on placing the casters diagonally to avoid screwing into all end grain. I wouldn't have thought of that. It was nice to see you had so much help from Lucy and Bubby for this build. That Bubby seems to always want to be in the middle of everything you're doing. He is such a wonderful companion to keep you company while working in the shop.
а что за программа? чтото я не понял
That’s a sweet design if you used a second top to double the work area, instead of having an open hole for your cnc machine that is! Very cool video thank you
That Flip Top is a brilliant idea. I'm definitely building one of these. Thanks for the software tip.
You are a bad ass. Dreamy to say the least! Keep kicking ass, I am a new fan.
Nice job. I wish I had seen this before I built my workbench. One thing, I'm old. I put my storage shelves under the top so I don't have to bend over as much. There is still a shelf at the bottom for larger items, and to provide stability.
Love the big orange kitty.
Shara, great design and build project!
I have a Portable Workbench in my garage shop, but not,any drawers, which I liked in your Workbench.
Well done, Shara!
I never check out the sponsors for any video, but Make by Me is actually a really cool product! Super easy to use and perfect for people like me designing pretty basic stuff. Always love your designs!
Checking out those sponsors' links helps keep the makers sponsored; always check them out, even if that means clicking and leaving immediately. It matters.
I didn’t know that, thanks! I too like Make by Me! I’m giving it a go. Thanks again!
I joined and am disappointed.. Took forever to load and very slow response time.. Perhaps because I'm in South Africa and not the States - not sure. I did like the fact that I could change measurements from "inches" to metric - that's a very cool feature. Will try it again and hopefully not experience the "lag" - I do think it would be a cool tool to have in my arsenal.
Shara, the bench looks great. I like the 'flip top' effect and I was impressed by the casters.
Thanks for the video.
That's a great simple work bench. Always like your ideas, work, and plans. Great job girl. Thanks 😊
Thank you so much! I appreciate you watching and following along. Have a great weekend! 🙌
I have a cnc and it’s been sitting for almost 3yrs. I am from Lake Charles,Louisiana, we had some bad storms. I wanna learned how to us mine, if you could make some videos on that I would appreciate it. I’ve learned how to cut and wanna learn my cnc. Awesome video, I can’t wait to see a cnc video tutorial for newbie’s.
I found your blog and TH-cam channel yesterday, so I followed you. You have wonderful and useful projects. Go ahead, hardworking girl!
Thank you so much for following along! I hope you continue to enjoy the projects and workshop shenanigans haha 😊 have a great weekend!
I haven't seen nice 2x4 's like this in a store for ages!
Thank you so much for the detailed directions on makebyme super helpful. Never made a workbench before or drawers for that matter. It turned out great and learned so much in the process. Thanks again!
Drawers and flip top works for me. Great idea
I need to move where you are, I’ve never seen such straight 2x4s in my life. 😂
I dig to find the good ones: www.woodshopdiaries.com/how-to-buy-lumber/
Having your 2 mates in there for supervision must make the days nicer :). Something I sorely miss in the shop nowadays.
Clever way to sort your CNC too Shara - easy against a wall or to flip if you want the table :)
How do you think it will go in regard to vibration and such? I think you may need breaks on the wheels to prevent the motor inertia causing wobbling? I don't imagine it will cause accuracy issues but vibration, chatter and such can be a pain in unforseen ways!
You are great!Woodwork has always been intimidating for me. This was also fuel by woodwork being for boys when i was growing up. But I need the cute things you make!!!😍😍😍
Love it! My garage is a disaster so I definitely need to build this!
My shop is almost always a disaster. I clean it up and it stays that way for approximately 5 minutes before it’s a wreck again 🤣 it’s a never ending cycle
A very cool idea on increasing access to your CNC while still having an upper work surface. Well done !!
Thank you! I can’t wait to put this project to good use! 🙌 have a great weekend!
Hi Shara, I am glad to see you are still thriving. I am finally ready to have a go at making your 2 drawer filing cabinet. I may try to make it 3 drawer. I finally found out how to get the information on your plans. I can now have a go at doing this at a local community workshop where they tools etc. Best regards, Joan (London, England).
Thats pretty clever table 😎👍
Thank you! I’m excited to put it to good use! 🙌
Nice! I think I may purchase a pocket-hole drill. These are great ideas. Thanks for posting this.
That’s exactly what I need to make! Thank you for the detailed instructions…I really needed them too!
Perfect work bench for a CnC machine! You must be going to get a really nice CnC..
Great job! You gave me a good idea with the folding top, since I have small space at my shop, I will add some wings to the side of my workbench to make it bigger when working with 4x8s but only when I need it.
Thanks!
You could totally double up the top. Attach the bottom one and add the top one with the piano hinge to fold the top over to double the size. If I didn’t add this specifically for access to the inside, I would have loved to do the “double size”idea.
@@WoodshopDiaries Thanks! Love your work!
Very cool, you are very skilled in the field of wood, greetings from Indonesia 🖐️👍🙏♥️♥️♥️
Your instructions are clear, your video work is very good and I love the pet cameo's. Thanks for this information - first this table, then onto the walk-in closet. Fingers crossed it looks as good as yours.
Nice work 👌 I've been looking for a wile to make a bench for my wife and I really like this design thank you for sharing 🌻
I've never seen this style. Good design!
Very handy workbench! I need about 5 of these for my auto repair shop ( my daily grind, woodworking is my hobby😊). Thanks for the info on MakeByMe. That looks like a good "tool" to have. I'll keep that in mind incase you don't already have a plan for something I need to build 😊. As always, have a great weekend!
Great job, I am impressed. Your building skills and video presentation skills are very professional.
Brilliant, Shara! Fantastic work! 😃
Stay safe there with your family! 🖖😊
Thank you! I appreciate you watching and hope you have a wonderful weekend!
We use Old Hospital-beds for our benches, cause you can adjust the hight for ergonomic working.
KITTY OVERSEEING THE PROJECT, GOOD JOB KITTY
Cat in the zone of work... TIPICAL hehehe. Greeting from Mexico, nice work
A classic Shara build with plywood, 2x's, and pocket hole joinery? Yes please! This is very practical and the basic idea is adaptable to many potential uses. I love your idea for having the fliptop capability just for good access to the lower shelf, but as you touched on, as long as you have something fairly bulky (like a CNC) on the bottom shelf, you could indeed use the top in the open position (with a little strategic reinforcement) without worrying about tipping. As a fluent speaker of "canine," allow me to translate at 5:15 ... "Mom, when are you gonna air condition this place?"🥵😆
It’s definitely a classic 🤣 I’m glad you enjoy my “style” of basic build! This could be used in so many ways. I want to build a couple of these to replace my old workbench too 🙈 maybe one day haha. And I believe you are right. Lucy would vote for AC BUT if she knew that would mean the doors have to be closed while we work, I think she might have second thoughts 🤣 she has her own personal fan and gets frequent snack breaks inside 😉
Shara. Both your designs and presentations are fantastic! Suggestion / request... I'm hoping for your take on basic, "farm style" DINING ARM CHAIRS. 🙏 Thanks so much!
A very simple but thorough video cabinet build. So many videos leave out the small steps that leave you guessing about the build at some point. Nice touch with your pets... Will be following your channel...
I built a similar workbench…but I use it as my kitchen island. :)
Ahaha! That’s a great idea!
Super and superb idea, and well-created, too. 🎉
Nice. I need to build one of these but not as deep front to back... I like the hinged top too. I'm thinking I'd some means of having those two hinged supports secured to the table - maybe just some hook latches or magnets?
Yeah I was going to get two gate latches to secure the supports. I just haven’t got around to it yet haha. The hinges are pretty tight so they don’t really fling out when moving it, but over time and with some use, they’re likely loosen up and need something to hold them shut.
THANK YOU for the makebyme reference
Freaking outstanding build Shara!... Im surveying build designs for my work bench. I love yours!
Nice build shara
Watching this was worth it for the kittah! Kittahs rule!
Your tools and techniques is nice
Glad you enjoy them!
Lol. This is something my wife would do - simple and works. 😅
This is really nice you did a great job explaining the process and the reasons. Great job.
very well and useful design exactly what I was looking for
Bien pratique,joli travail bravo à bientôt salut Jeannot ⚒😉
Thanks for posting this, its awesome!! Excellent and easy to build design!
that was massively impressive !
Nice workbench Shara! I like the project software that you introduced with this build. It looks very useful. The folding bench top is a great idea. Bubby sure was interested! Lol…. Lucy, in her refined way, just supervised! Keep on building! Have a great weekend!
Thank you! I always appreciate you watching and following along! Bubby and Lucy make working in the shop tons more fun. I’m always appreciative of their company haha. I hope you have a wonderful weekend and thanks again for watching!
4:48 😂😂❤
6:47 I really thought you were going to try bottom mount slides here. But maybe I've just been watching too much Bourbon Moth lately. 😊
12:28 This is so epic! Not too complicated and functionality is top notch! 10/10 Shara, you keep finding ways to out do yourself. 😁
Very good bench
Thank you! I appreciate you watching!
Just found your channel, thanks for sharing this. My students will be building one of these for our shop this fall.
Excellent build my friend!⭐⭐⭐⭐⭐
You are starting make me wish I had built a workshop instead of a music studio LOL.
When I retire I am planning to start building again :).
Thanks for sharing your fantastic skills and knowledge!
You’re making me wish I had built a music studio vs a workshop haha. Music is often more fun than sawdust 🙌 I appreciate you following along and I hope you have a wonderful weekend!
@@WoodshopDiariesYep, especially at clean up time 🤣😂.
I guess I better start dancing while I am working, that'll help LOL.
Thanks and you too!
Really nice design! Came out great!
Thank you! I’m excited to put it to good use!
Ottima idea Shara, complimenti! 😃
Thanks for the build/design software. It sure looks fairly easy to learn and work with. How do you keep things from "walking" a bit then driving screws in the pocket holes? My projects seem to drift just a wee bit as I drive the screw in. Lucy didn't seem to enthused about being on camera. lol And Bubby... well he was just telling you that it was break time. Thanks for the bench idea, I'm sure it will come in handy. Until next time. saw safe.
Great build. I don’t normally watch this kind of video but since I plan on building a work bench soon I watched this one. I was impressed. I will be referencing this video when I build mine. Thank you for doing this video. Great job! 👍🏼
good looking work bench, and big thank you for telling me about the MakeByMe
Great Job on the work bench 👏 👍
Thanks so much! Have a great weekend!
I really wish i could search past comments cause i feel like im about to ask teh same question, or i wasnt paying attention.
Is it "Make By Me" or "Home By Me". New to wood working and i started on small projects. Graduating to larger projects. Sharah you gave me the confidence to do so with your tips.
Hi! MakeByMe is made by HomeByMe. HomeByMe is a broader program for larger designs. MakeByMe is a branch off made specifically for smaller projects like furniture. The link to MakeByMe is in the description to take you to it directly 😊
Alright Shara, where are they?! The cameras…where are they?? 😉. I swear woman, you must have a view into my house and work area, because you continue to make things that I either need now, or have been needing to make for a long time!!! Soooo, where’s the cameras?!? 😊
All jokes aside, this is a really cool work bench. One that I haven’t seen from anyone else either, and trust me, I’ve been looking. (Oh never mind, you already know that from the cams!). But your flip top bench is a new one on me. I was thinking at first you were going to make a double thick top, so when you flipped it open, you’d have like an 8’x8’ work area, especially since you have the room for it, but I think I like this way better.
(Oh, and don’t think I wasn’t waiting on the struggle bus on the lower shelf once I saw you had the frame together! I only know that though due to my own mishaps!)
Last bench I built I did the same with the bottom shelf luckily I never glued any of it
Great project. Love the simplicity and functionality, great work😊
Great job, nice shop, simple organized..
the flip top is bad ass! Nice work
wow great job. i will attempt to build that one day. keep up the good work.
Hi thank you for your video it’s brilliant and I’d love to make one. Could you please send me link for plans and the size of the legs please. I can’t seem to find them.
Neat CNC table design. However I have to ask. Which CNC? I've had the Onefinity for a couple years and love it.
Thanks! It’s a shapeoko. I’m almost finished putting it together