You did it all wrong. You are suppose to tape around the lights before sanding so you can get to the edges and then wet sand. The pads are labeled. One is 1 and 2 the other is 3 and 4 thats from coarse to fine. After you sand with water and not the polish you then go back and polish the haze from the lights with the polish and a polisher or microfiber cloth. Then you mask off the surrounding area to avoid the over spray.
![Meguiar's headlight restoration review. headlight restore #HeadlightRestoration #Meguiars [303]](/img/n.gif)
0:44 you had masking tape on the table @0:35 😂🤷♂️
That’s regular tale
YES. I love this product. Easy to apply and really works.
Well done!!!
Awesome thank you for the review!!!
Not bad I wasn’t expecting those results but yea even if it’s a temp repair . The lights came out nice .
how did you forget the masking tape if you had some in the thumbnail…
With the power of editing 😎
Haha!!!
Let's not ignore that 4g63. Beautiful!
Thank you!
I bought it n used it. This stuff is amazing. Just put 2 to 3 coats of spray 10 minutes apart. Shi works
@@rizo662 yeah it does!
This really works
0:30 so did it?
You did it all wrong. You are suppose to tape around the lights before sanding so you can get to the edges and then wet sand. The pads are labeled. One is 1 and 2 the other is 3 and 4 thats from coarse to fine. After you sand with water and not the polish you then go back and polish the haze from the lights with the polish and a polisher or microfiber cloth. Then you mask off the surrounding area to avoid the over spray.
This kit doesn't sand its a chemical reaction with a buff pad
Too much yappin
It works but it won’t last. Need to sand the headlight up to 2000 or 3000 grit and then spray a clear coat with UV protection. Then it will last.
🤦 hell no try p500 then p800 then polish 3,000
You did it all wrong 🤦