วีดีโอ

YES. I love this product. Easy to apply and really works.

Tires are made of thread?

Good video I’m in Orlando I’m looking at a 98 talon tomorrow hopefully every thing goes well

I just installed these on my 2019 ford ranger. Ranger tires on my ranger truck haha. I love em so far. Hope they actually last 50k miles. How many miles do you have so far?

Running these on a VW Atlas as I due some overlanding running load ranger E LT tires. Hows the noise? Mine are pretty noticeable. So there is some road noise. As far as wear. They don't wear too fast. I have about 8000 miles on mine. They do grip really good off road. I have had them aired down as well and perform well. Also I have taken them through snow and ice and perform well. My only down size is the road noise and slight vibation but i truly believe that is due to the tire having an an aggressive tread pattern. THUNDERER if you're reading my comment shoot me a message id love to test some more out

Why didn’t you turn your tire to the right and give yourself a better working angle? I have one in a similar location.

Hello bro I was thinking on getting 35s how are they so far?

so check out scorpion tint or any other brand and find their discount section. scorpion had a 20x 100ft roll of carbon for 10$ with 30$ shipping. I added 6 rolls and it was still 30$ for shipping. I get flexfilm clearance films 30$ for carbon free shipping on 1 roll or 59$ for ceramic again 1 roll free shipping. I got 2 rolls of 20 x 100 ft of ceramic (top of the line tint) for 150$ and a 60 x 100 ft (cut 36, 24)of carbon for 115$. more then enough for practice on any car its enough tint for over 10 cars for under 300$

Failure is quitting. Everything else in the middle is progress.

Hello. This is Cherry from Coverado. Are you interested in working with us to try our Ram custom seat covers and help us make a video?

I love the super44 the most

How do you like so far

There is a blue and yellow wire 5hat no video says where they go .

what fuse would i use for a silverado 2009 1500 ? can u help bro - great job tbh!

Why do you talk like that. You sound so dumb

Awesome thank you for the review!!!

I bought it n used it. This stuff is amazing. Just put 2 to 3 coats of spray 10 minutes apart. Shi works

I went with a Super 40 instead of the Super 44. The reason why is because the Super 40 is rated for higher horsepower, and it has a thicker casing for less drone and more durability for a truck application.

I ordered a can of black tail light tint, I removed the red tape from the side I wasn't going to be using, then painted the whole thing black, then installed it, so now it looks like a black weather strip like whats on the rest of the truck, but when the lights come on you can see the light scanning back and forth, its awesome, and no one knows its there until you turn on the vehicle, I also hooked mine up to my marker light, so it scans when I unlock the car, and also scans whan the headlights are on. 🤠👍

0:30 so did it?

Great video!😁

That’s cool 🎉

12:20 you got lifter issues

any troubles closing the hood.

Another review waste of time, same thing over and over

Is it still working? A lot of bad reviews

What fuse did you connect deposited to in the box so it goes on when you start the car what number fuse

0:44 you had masking tape on the table @0:35 😂🤷‍♂️

were those new gages supposed to be 10A or does it depend on something?

That's one thing I wasn't sure about, since the hood strip comes with a small inline fuse I wasn't sure if you still had to add the extra fuse for it also onto the piggyback adapter. Thanks for the video was helpful

Are they on all the time ? Can you turn them off and on ?

Well done!!!

so what happens when you have to change the headlight bulbs don't you have to take the grill off so all that work was actually a waste of time?

Great points. Thanks

Nice video. Thanks.

You did it all wrong 🤦

It works but it won’t last. Need to sand the headlight up to 2000 or 3000 grit and then spray a clear coat with UV protection. Then it will last.

Nice job

Not bad I wasn’t expecting those results but yea even if it’s a temp repair . The lights came out nice .

Let's not ignore that 4g63. Beautiful!

Plastic dip work great anytime want peel them off lol

You did it all wrong. You are suppose to tape around the lights before sanding so you can get to the edges and then wet sand. The pads are labeled. One is 1 and 2 the other is 3 and 4 thats from coarse to fine. After you sand with water and not the polish you then go back and polish the haze from the lights with the polish and a polisher or microfiber cloth. Then you mask off the surrounding area to avoid the over spray.

This really works

It's only work for some phone my Nokia is doesn't work I'll buy real scan tool

Is BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android able to scan european cars as well and is there a list of models that it covers? I know that this video is 2 years old, so I am interested if it is still a good buy

What a beast

Can’t wait to see the talon in a couple years 🎉

Heyyy nice car!

FORD???!!!!!! BRUH NOOOOOOO!! 😂 Has your top 5 changed since making this? It's been 5 years! My top 5 in no order (it's really hard picking just 5 though honestly): BMW Alfa Romeo Maserati Aston Martin Bentley/Rolls Royce

if that could put EPB into service mode i would buy it, but i don't believe it can 🤔