Machining process #5
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- #5 made a chess PAWN!
Next time, Bishop...!?
Click here for the long version!
• Demonstration #1 - Che...
■Products & cutting conditions
①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115
Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm
②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225
Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm
■Work material : C45
#shorts
#cnc
#machine
#machining
#tools
#ev
It's nice that the cutting bits also look like art.
Thank you for liking it!
Tungsten tool bits are incredible.. the are light as a feather but atleast 10× stronger then regular steel bits
I see chatter on that finish!!
Where?
@@danl.4743 The shaft.
Thank you very much for seeing it!
Well... Easy way to get rid of it: first of all, you are making a copy of door key on a laser cutter, so you can operate this thing with open door. At second you take some sandpaper and polish this thing until it shines like balls of the cat.
Thats what we Turning Guys call SFM Zonk, those SFM Zonks tend to like a little more cutting force with a deeper depth of cut, and a little bit more feed, but that tool angle doesn't offer any favors either, considering what's there it's a pretty decent little guy :P them small parts and them raging RPMs I tell ya,
you guys have the nicest short cnc videos on YT !
Thank you so much for your compliments!
It means a lot to us to hear you say that!
おぉ…見事…綺麗なポーン…
コメントありがとうございます！
あとは、ナイト、ビショップ、クイーン、キング！ナイトが難しそうですね★
クーラントなしで削れるんですね。美しい仕上がりです😊
コメントありがとうございます！
適正な条件ですと、ドライでもこのように加工できます！もちろん、推奨はクーラント使用しての加工になります！
使用する事で、加工面、切屑処理、工具寿命に影響があります！
@@TungaloyCorporation
なるほど...φ(. . )
ドライの方が、動画としては見映えがありますね🙂
Definitely needs coolant on the one I run, ran it without coolant for 5 seconds and saw sparks flying 😂
These are one of the most awesome things I'm actually inspired to try and find how to get a job doing this, really awesome.
Thank you for the best compliment!
Beautiful presentation 😮😊
Thank you so much for your compliments!
It means a lot to us to hear you say that!
Looking at the surface finish there seems to have been some vibrations.
I never knew that I wanted an entire set of machined steel chess pieces. Maybe one set would be gun blued. It would be so satisfyingly to play on a dense hard wood board.
Thank you for watching the video!
Put one of the sets to rust and coat the other to not rust
I never knew I wanted an antique set of machined steel chess pieces. If you want to buy it then come to our link
OAK AND BLACK WALNUT WITH BRONZE CORNER PIECES ON A Wrought iron base as it would be heavy.
OMG it's so smooth 😭😭✨
Thank you for liking it!
ケースから取り出すときにピンセットを使い刃先を避けて持つの好き(好き!
コメントありがとうございます！
刃先命でございます！
Thanks for the tip. Safety first especially with new blades.
Aw I actually liked the lines on the base
Amazing tools...
Thank you for the great compliment!
Love watching the finishing pass.
Thank you for the best compliment!
This machine is even more precise than aimbot.
Thank you for liking it!
Love watching the finishing pass. Slow it down a little for smoother finish
Thank you for liking it!
Gloves maybe, but Tweezer to pick up inserts.
I don’t think so.
Good video.
Thank you for your comment!
Мелкие вставки удобно доставать с помощью пинцета
I used to work in a machine shop when I was 21 or 22. I was on and end mill was think, I used to love to watch the lathe machines work, it was really satisfying to watch.
It's fun to watch these processing videos!
There are many more, so please take a look.
Beautiful
Thank you for your good comment!
Beautiful work
Thank you for the best compliment!
Es maravillosa la maquina
😮And It's Pricey As Well😢👍🤗👀✨
¡Gracias por su interés!
A Pawn! Very nice!
Thank you for the best compliment!
Worlds most expensive chess piece.....
Thank you for watching the video!
perfect you can see our factory
Thank you for liking it!
Очень класно и профессионально,люди будут покупать такие фигугы и шахматы,покажите как вы сделаете коня😊
Спасибо за ваш комментарий
Коня сделают на фрезерном.😊😊
😂😂😂😂😂
станок с чпу.проше простого.сделай это на 1к62@@TungaloyCorporation
@@sergeyremains9512а чё там делать, если ты токарь? Кроме коня можно на кашке все фигуры сделать.
This is what i want to do.... Machining with all old-school type machinery, really want to step up and learn CNC programming etc. i feel it's the next level to progress in machining. That and a metal additive 3D printing!
You are a future engineer! That's amazing!
@@TungaloyCorporation thank you, I've always been a mechanic and worked with machining equipment, like lathes, presses, numerous metal fabrication tools and also welding.... And have always loved engineering on a small scale, producing parts or tool's needed for things I didn't have or part's I couldn't afford. Always have been computer literate, CNC programming and additive manufacturing with semi precious metals seems so appealing and because there are things I want that I only want to build.... NOT BUY
@@TungaloyCorporation Do you have any information or videos on additive manufacturing/ 3D printing?
@@ThePatriotParadox We have a little bit of it, so please watch this video.
th-cam.com/video/i3ce-izB7o4/w-d-xo.html
Una maravilla de torno ....
¡Gracias por su interés!
Legal foi ele responder em espanhol kkkkkk
Smoooth. Well played.
Thank you for your compliments!
This is neat i wasn't sure how to get that steel done in that fashion
Perfect! This is steel?👍
Thank you for your comment!
Yes, work material is steel!
It amazes me how ceramic cutters can do what they do. Unbelievable!
Thank you for your interest!
These are carbide not ceramic.
Very Nice ❤
Thank you for your compliments!
Good job🎉
Thank you for liking it!
Amazing 🎉
Thank you for liking it!
i still remember the best cutter i ever used
was like QSER\L and 3.something mm (old series)
was beautiful F0.04mm
thank you tungaloy ^^
sadly turning inserts are a little under the competition ^^
Thank you for using us for a long time!
We will do my best to contribute even more to turning chips!
Looks good. Do it on a manual now.
Thank you for your comment!
Lol. Just giving you a hard time. Apprentice manual machinist here, left handed and learning lathe now myself so I like seeing this content.
@@indubitably424
Fair play lad.
There is a reason for manual and CNC. Manual is a great way to learn the mathematics and then apply it to CNC and your life will be easier and you will make more interesting parts ..
Super fantastic ❤❤❤❤❤
Thanks 🤗
チェスの駒シリーズですね！
はい！シリーズにして最後は社員同士の対決を配信したいと思っています。笑
Soldier 💂
Şah
作業工程のダイヤラップやってました。
刻印までの工程で商品の検査や寸法のサイズの品質も良い状態だと思います。
コメントありがとうございます！
Vnmg R0.4 and Dcmt R0.8
Thank you for your comment!
:-D And TiO2 coating..
Dnmg 0.8 and vnmg 0.4,
YNMG 331
And DNMG 431
Great and strong tools ❤❤
Thank you for the great compliment!
Were the tweezers necessary?
Thank you for your comment!
Yes, we took safety into consideration!
@@TungaloyCorporation you used your hands when placing it into the holder. So make the tweezers make sense when taking it out of the box? Are you just so corporate that you can’t admit that’s redundant?
@@ogliberty5486 It was difficult to insert with tweezers and was set by hand. Thanks to the gloves, I was able to set it without problems!
@@TungaloyCorporationso why use the tweezers? Can you just say it was for the video? Because they serve no function.
@@ogliberty5486 When attaching the insert to the holder, it was difficult to do with tweezers, so I attached it with gloves on.
Although it is possible to remove the insert by hand, we used tweezers to avoid making it difficult for the viewer to see the insert.
I want that chess set I’m a old tool and die maker and I would really appreciate something like that.
Thank you for your comment!
The next one is planned for December, so please look forward to it!
Remember, engravings give you no tactical advantage whatsoever
Thank you for your valuable opinion.
Nice work
Thank you for liking it!
Click here for the long version!
th-cam.com/video/gBqDhkB-X84/w-d-xo.htmlsi=vm739VGKzvDRFVgS
■Products & cutting conditions
①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115
Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm
②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225
Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm
■Work material : C45
Drawing dend kijiye
Pengen banget punya channel youtube yang ramai seperti abang ini.😢
That has to be the nicest ass plug I’ve ever seen😮
You want Moszkowski maybe? No. Plays Moszkowski.
Thank you for your comment!
Amazing
Thank you for the great compliment!
Amazing work.... What are those cutting bits are made of...?
Thank you for your comment!
The material of the insert is made of cemented carbide, which is the second hardest material after diamond!
@@TungaloyCorporation thanks a lot for this information 👍👍
А коня так может вытачить?
Спасибо за ваш комментарий
Только лошадь)
Могу кобылу в соседнем цеху запилить на восьмиоснике 🙂
Красивая пешка, залипательно! 😊
Благодарим вас за проявленный интерес
Еб.нные шахматы)
Мы делаем металлические стружки, много стружки!!
Спасибо за ваш комментарий
The pressure on the tip of that insert must be ridiculous. Carbide is amazing stuff.
We agree!
Sharpening iron is amazing!
El acabado: S1600 F0.18 PARA 1U
Thank you for your advice!
Actually, that part has a mirror finish. There was another different big part on the bench that was only roughed. You just see the reflection. Lol
Thank you for watching the video!
Well done.
Thank you for your compliments!
Превосходная работа!! Просто класс!! Респектище!!
Благодарим вас за проявленный интерес
❤❤❤❤lindo trabalho, parabéns
Obrigado pelo melhor elogio!
Needs a sanding but amazing code
Thank you for liking it!
next time use F0.02mm for finishing, a G50 (rpm limit) and a more tough finishing pass ^^
Thank you for your valuable advice!
The next one is planned for December, so please check it out as well.
Какая хорошая шероховатость... 👍👍👍
Спасибо за ваш комментарий
I like so very well your job
Thank you so much for your compliments!
It means a lot to us to hear you say that!
Просто прекрасное зрелище для души
Благодарим вас за проявленный интерес
Looks like a chess pawn! Make a whole set!
This is a pawn processed!
We are planning to have all of them, so please look forward to it!
th-cam.com/users/shortsQfDE0Mq2Smw
the tolerance is accurate
Cómo es el criterio para elegir la herramienta y el inserto?
¡Esta vez le pedimos a una joven esperanza que eligiera!
Básicamente, creo que a menudo se selecciona en función de la eficiencia, el costo, etc.
Its very easy for me but my company will never give me chance to make this timepass piece
Thank you for your interest!
Are you a machinist?
Работал в УПК ученики с удовольствием точили фигурные изделия, шахматы, ♟, подсветчники (тв4 СССР 87г)
Благодарим вас за проявленный интерес
Quantas horas/máquina, o cavalo? 🐎
Ainda não produzimos nenhum cavalo. O próximo será carregado em dezembro!
@@TungaloyCorporation
Me inscrevi, e apertei o Badalo! Não quero perder!
Chess pieces are the benchy of the cnc lathe demo world.
Thank you for your comment!
I watch one cnc video now it's all trailer hitches & chess pieces.
Thank you for your comment.
Эти резцы, как артифакты с другой планеты.
Спасибо за ваш комментарий
Chip breaker type insert
Thank you for liking it!
角が丸い方が粗挽きですね、角が鋭い方が仕上げなんですね😃結構昔に旋盤加工していましたが、懐かしいです‼️
コメントありがとうございます！
昔加工されていたんですね、こういった動画見ると加工したくなりますか？
Incrível uma ferramenta de cerâmica q corta o aço ....
Ceramic is just metal that's too hard to melt and must be sintered :) well... that's reducing it incredibly, but the point stands, it's just mostly made of other metals
What the name of this tool set??
Are you talking about products?
■Products & cutting conditions
①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115
Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm
②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225
Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm
めちゃかっこいい！
凄く嬉しいです😭
ありがとうございます😊⭐️
Me gustaria ver como hace las otras piezas.
¡Luke será el próximo en producirse!
Need another 15 of those, 8 in brass
Thank you for your comment!
Эти резцы как произведение искусства...
Благодарим вас за проявленный интерес
nicely done 👍 love it!
We are so happy! thank you!
There will be a second edition in December, so please look forward to it!
What's the material and your speed and feed?
Thank you for liking it!
■Products & cutting conditions
①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115
Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm
②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225
Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm
■Work material : C45
Hello, did you process this with mastercam? Can you share the picture?

No CAM is used here!
It is programmed by hand using Catia.
Finish 0 percent - art 100 percent
Thank you for watching the video!
Didn't TitiansofCNC make one of these?
I think they're probably making something even more amazing!
@TungaloyCorporation They do make cool stuff, but don't discredit ur self this was a good part. (I work at a machine shop during summer's loading parts. Hopefully I learn how to operate a machine one day)
@@lukejones8182 It's great to try something new!
@@TungaloyCorporation yea
I mean I'll use it but the flare is a little too high no
Thanks for the advice!
Nice pawn! I'm old school, before CNC, why no lube&coolant. Would'nt make the tool last longer?
Thank you for your interest!
This time we did it dry so that you can see the processing and the product carefully!
We recommend using cutting oil!
I thought it to be the bishop
Que belleza de maquina
Gracias por su comentario.
Good luck hai bhahi😊
Thank you for your comment!
Can you please tell me Which cycle used for this product ?
Sorry, We don't have a program.
I've been told by everyone that they want a program, but do I really need one?
Super 😍
Thank you for the best compliment!
me gusta mucho este tipo de videos
I have no knowledge of CNC Machines or they work. And don't want to know either. But I could watch them work all day. Lol.
Thank you for watching the video!
Прогу в студию)
Спасибо за просмотр видео
Классные резци👍👍👍
Благодарим вас за проявленный интерес
Can u plz tell me what was the speed and feed
■Products & cutting conditions
①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115
Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm
②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225
Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm
Nossa que modelagem muito linda
Can you tell me what camera you used to record this video?👉👈
Canon SLR camera!