Arvind Bhaji, Hello from Canada, this is such a great and simple idea. Thank you so much and keep up the great work!! BTW, your bike looks awesome, love the lights in the front they make your bike look like a transformer!! :)
This Guy is a true embodiment and worthy of the description "Versatile"...........Thanks for sharing arvind.......Pleasure to know you in person......:)
Very nice mod.. simple practical and economical.. thank you sharing. I will be trying this on my new Interceptor 650.. did couple of long drives[1000km] and felt need for relaxing right hand once in a while 👍👍
Hi bro .This is just amazing... luvd it... 1 thing i would love to know is how u built the twin 50w led headlamps... Are they switchable from high to low just like our bulbs... Any effect on our battery any other circuit required to keep the led temperature down to the safe limits and are they good during rainy seasons
+Vishwanath Kotian Thanks buddy for watching the video. Please subscribe for more such videos. For Twin Projector setup I bought Bi-Xenon projectors from Aliexpress.com so there is shutter just like normal HID projector. No Effect on batteries. in Pulsar RS we have 55+65 Watt Lights and I believe it must have same alternator as NS. Also practically I haven't faced any issues with battery. Yes on idling say at traffic signal I usually turn off them or simply stop the engine which turns of them too. I also bought these LED headlights so they have inbuilt heat sink and fan to lower heat. It's little bit costly setup and took considerable time and effort. For normal economical and still good headlight I would prefer HID projector with 55 Watt Ballast. I had it before these LEDs
nice jugaad bro. i tried it on my Avenger and it is working very well. just one advice to everyone. While buying the clamp, make sure that you buy one with longer strip. as it might be short to get to the brake lever. in that case, buy two of them and join one them to make long enough Happy Riding 👍
Thank You Arvind. With your capabilities please make a video on correctly connecting a USB charger to a bike, and if possible another video on replacing stock headlamps with LED headlamps.
Dude ofcourse the speed will drop when ascending on hill or bridge.. since its a mechanical jugaad. But really appreciate the video. Will try on my avy too!
Great straight forward diy video mate..! I too recently designed my quick shifter with a reley that momentarily shuts off ignition.. Keep us updated. :)
+Audacious Arvind not into vloging yet.. yes ive fitted it on a friend's duke 390. will make a better version and share it with you over Facebook soon.. :) (have sent req)
Good to find such a talented motovlogger from Delhi-NCR...subbed to your channel and would love to meet you in some weekend..Btw, am from East of Delhi..do check my creations some time..Cheers and ride safe..
Sahil Bhatia hi. Thanks for watching. Please try to find out sweet spot between too tight and too loose. Try with better quality hose clip. You can also try to put your favorite handle bar grips and then try it over them.
It is comfortable to ride on 200 NS to Ladakh or some other long trips. Did you face any problem regarding throttle wire , clutch wire or engine oil. Please mentio the problems regarding your ride.
Amit Mann it is pretty manageable. It is not as comfortable as Avenger or RE bikes but definitely more comfortable than KTM Duke. I added foam in seats. No issues regarding clutch or throttle wires. If they are old in your bike say more than a year then it is suggested to replace them or at least carry new one as spares. Only issue I faced in bike was only on high altitudes like khardung la Jo zila... Power was dropped drastically. This problem is with every bike with carburetor not with NS only. It is recommended to put a wire in carburetor jet by mechanic at Srinagar or Manali, this will vanish the above problem.
Amit Mann I didn't do it so faced some issues. Also on such Heights when power is dropped in your bike and it appears engine will stop, you need to ride with least possible throttle... I was throttling more thinking it will give power, usually it does but on such heights air is very thin so situation changes. One of my friend on NS didn't get this wire in carburetor and completed rides successfully. However it is highly recommended.
I clicked on your video to learn how to make a cruise control. Three minutes in and you haven't even mentioned the topic. I suggest that for your next videos you learn to get to the point and learn how to hold a camera still.
Skip forward to 9:07 for the actual device
thank you... he was making me quit the video!! totally irrelevant talks from topic
Arvind Bhaji, Hello from Canada, this is such a great and simple idea. Thank you so much and keep up the great work!! BTW, your bike looks awesome, love the lights in the front they make your bike look like a transformer!! :)
Thank you so much buddy! Love from India.
Fantastic! Ingenuous! I have been riding for 20 years and never thought of anything so simple. Great video, Thank you.
Subscribed to you mate! Cheers!
Thank you so much bro. I hope I will continue to upload good content seeing guys like you :)
This Guy is a true embodiment and worthy of the description "Versatile"...........Thanks for sharing arvind.......Pleasure to know you in person......:)
+amit sharma Thanks bhai. Credit goes to you as well for believing in me :)
Are those EL wire lights still working?
And from where did you brought that remote switch at 2:35
I know this is an old video but thank you for the idea, this is brilliant in its simplicity. Much love from California
Sir.. which type of tire you are using in front wheel of your ns200?? Bias or radial??
Please suggest me a better option for my ns200
Very nice setup on the bike! I'm happy to see someone applying formal education towards his hobby.
Never would have thought of that. Thanks for the idea
Very nice mod.. simple practical and economical.. thank you sharing. I will be trying this on my new Interceptor 650.. did couple of long drives[1000km] and felt need for relaxing right hand once in a while 👍👍
Hi bro .This is just amazing... luvd it... 1 thing i would love to know is how u built the twin 50w led headlamps... Are they switchable from high to low just like our bulbs... Any effect on our battery any other circuit required to keep the led temperature down to the safe limits and are they good during rainy seasons
+Vishwanath Kotian Thanks buddy for watching the video. Please subscribe for more such videos.
For Twin Projector setup I bought Bi-Xenon projectors from Aliexpress.com so there is shutter just like normal HID projector.
No Effect on batteries. in Pulsar RS we have 55+65 Watt Lights and I believe it must have same alternator as NS.
Also practically I haven't faced any issues with battery. Yes on idling say at traffic signal I usually turn off them or simply stop the engine which turns of them too.
I also bought these LED headlights so they have inbuilt heat sink and fan to lower heat. It's little bit costly setup and took considerable time and effort.
For normal economical and still good headlight I would prefer HID projector with 55 Watt Ballast. I had it before these LEDs
Really liked the video 👍 well can u tell me from where did u get ur hand guard ? And from where did u chng ua odometer screen colour ?
nice jugaad bro. i tried it on my Avenger and it is working very well.
just one advice to everyone. While buying the clamp, make sure that you buy one with longer strip. as it might be short to get to the brake lever.
in that case, buy two of them and join one them to make long enough
Happy Riding 👍
BRO WHAT TO CALL TO SHOPKEEPER ANY NAME FOR THIS TOOL??
Shailesh bisht see the video captions
good customization and was waiting for this kind of cruise control thanks buddy
Great idea Arvind. Thanks for making the video of it. Subscribed!!!
Thank you so much buddy!
thanks a lot for sharing this man..n ur bike looks stunning...awesome tip u saved my money im subscribed... :D
Thank You Arvind.
With your capabilities please make a video on correctly connecting a USB charger to a bike, and if possible another video on replacing stock headlamps with LED headlamps.
Great jugaad... I have seen people spending approx ₹2000 for after market cruise control...This is just awesome...
Dude ofcourse the speed will drop when ascending on hill or bridge.. since its a mechanical jugaad. But really appreciate the video. Will try on my avy too!
Thanks Bhai....😂😂😂 It's actually working and I used to cruise from dehradun to delhi ...thanks a lot
Bhai aj Puri Karol Bagh market ghumi kahi nhi mila cruise control. nd thanks for the video. nd now I make it by my self.
dude i seriously now admire this, cuz this worked out for me
Hey buddy that is genius, will definitely try this on my bikes...Thanks again for the video...
Awsome idea. This think going to help many bike riders for long road trip. Thanks for this idea.
Great straight forward diy video mate..! I too recently designed my quick shifter with a reley that momentarily shuts off ignition.. Keep us updated. :)
Thanks bro. Good to know. Please make a video of your quickshifter if not already done.
+Audacious Arvind not into vloging yet.. yes ive fitted it on a friend's duke 390. will make a better version and share it with you over Facebook soon.. :) (have sent req)
+shreesha sure buddy will check it out.
Handle guard look good tell were do you buy it?
Cheap and Best Idea !!! Thank u very much dude.. U saved my money!
Is it the stock headlamp or you have fitted something aftermarket?
nice tutorial and you did a good job in your bike as well awesome..
Thanks buddy!
Great idea - easy to make , looks straightforward . Thanks
Why you are not uploading videos now?
And You were using SJCAM or GoPro?
93 Rider thanks buddy for expecting.
I have sjcam sj5000.
Editing videos are not my cup of tea. Will try to upload soon.
life saviour in the last moment. THANX A TON
THANK YOU BRO .. for this Jugaadu cruise control ❤️
hi bro. i love this idia .. and what to try this but how can i buy this metal ring and what is the price.. kindly tell me please...
Please give a short review here of your moxi levers
Good once bro, will definitely help in long rides, thanks, all the best for you ride.
How does the headlight cover light green it is awired led or something?
buddy... do a DIY for the KTM handguard installation... please do tell the spares used
Jugad kya baat hai.simple.and work great.👍👍👍👌👌👌😉😉
Really clever n awesome idea.. Il definitely try this..Good job keep up.
Awesome looking bike man.. great transformation.. loved it
Loved your mods man!
Hello Arvind, I live in Calcutta, could tell me how to make this thing
Very good for a first video... keep it up.
+Ride With Rahul Thank you so much Rahul. I have been following all your videos and like them. Your appreciation means a lot to me :)
Subscribed to you Aravind, please continue with good work and help fellow members learn 😊
Good Job bro.. I liked the idea and DIY :)
Ride safe
Cheers
Nice idea! Keeps uploading such ideas….subscribing you
it was very much helpful for me !!!
Thank you very much...
i am using it for my pulsar ...
witch headlight bulb is on your bike
Super Indian Jugaad, Thanks for sharing, Keep it up
How to you changed d speedometet console light colour?
nyc modification
all the best ur next videos
keep it up
bro from where you brought that handguards, i also need one. im also using 200ns
These are of Duke 390. You can buy them from any KTM servce centre.
+Audacious Arvind and will it be direct fit to NS or need any minor changes?
+Heavy 92 by the way that twin projecto setup is also awsome
What is that lock and where it is available.??
Liked... Simple and effective mod. Much appreciate the effort
Good to find such a talented motovlogger from Delhi-NCR...subbed to your channel and would love to meet you in some weekend..Btw, am from East of Delhi..do check my creations some time..Cheers and ride safe..
+As I Ride MOTOVLOGGING Thanks buddy. Sure will check them and we will meet someday. Keep Riding!
Wow man nice idea thanks a lot
thanks for your video :)
You're welcome buddy!
I am a fan for your idea.
shenbaga pandiyan thanks buddy. It's old ides I just tried to implement and show it how to.
You are a genius.
Apki bike me right side two button kiske hai
yaar tuneh toh sahi kiya, saved me a bunch of money 💵💵🙏👍
Indian Juggaadoo😂😂
Mokshit Mehta we Indians are great jugadoo. Kudos to that!
Does this work with stock handlebar grips?
It should work with any type of grips. We just need to tight the enough to find the sweet spot.
it does not work on my fzs. as i leave the throttle it rolls back...can anyone help regarding that?
which bike it is ???
tried it but didn't work for me :(
it de accelerates quickly if lose else in tight condition it doesn't move. Can you help?
Sahil Bhatia hi. Thanks for watching.
Please try to find out sweet spot between too tight and too loose.
Try with better quality hose clip.
You can also try to put your favorite handle bar grips and then try it over them.
Awesome idea. Tkx
Wooo.... Thnq bro for this idea😃
Great idea.
did you made your trip for ladakh on pulsar 200 ns
Amit Mann thanks for watching. Yes I did Laddakh ride in 2016. It was great!
This year I am also planning again for Laddakh or for Spiti.
Amit Mann thanks for watching. Yes I did Laddakh ride in 2016. It was great!
This year I am also planning again for Laddakh or for Spiti.
It is comfortable to ride on 200 NS to Ladakh or some other long trips.
Did you face any problem regarding throttle wire , clutch wire or engine oil.
Please mentio the problems regarding your ride.
Amit Mann it is pretty manageable. It is not as comfortable as Avenger or RE bikes but definitely more comfortable than KTM Duke. I added foam in seats. No issues regarding clutch or throttle wires. If they are old in your bike say more than a year then it is suggested to replace them or at least carry new one as spares.
Only issue I faced in bike was only on high altitudes like khardung la Jo zila... Power was dropped drastically. This problem is with every bike with carburetor not with NS only. It is recommended to put a wire in carburetor jet by mechanic at Srinagar or Manali, this will vanish the above problem.
Amit Mann I didn't do it so faced some issues. Also on such Heights when power is dropped in your bike and it appears engine will stop, you need to ride with least possible throttle... I was throttling more thinking it will give power, usually it does but on such heights air is very thin so situation changes. One of my friend on NS didn't get this wire in carburetor and completed rides successfully. However it is highly recommended.
great job, i am going to try this on my cruiser this weekend, thanks
Thanks buddy for watching the video. Good luck.
which bike in this vid bike name plzzzz ans me
sweet and simple
nice bike!
nice and easy
Good Idea 💡
Where to buy the hose clamp from?
Any hardware store or auto parts store
Sir where I come to meet you in gurugram ??
I'm In Gurgaon too with NS same color. Can we meet some day ? I want to talk about DIY.
Bike name?
awesome bro!
dude what is the headlight name its awesome
Thanks buddy. I custom made it.
WOrking in TCS?
Simple and effective
super cool idea bro 👌😍
Good work......really good
good one, keep it up.
wow loved this one 👌
it'd be too kind if you could help with attaching horn relay for an extra horn attachment... thanks in advance..
Thanks buddy. Yes it's a good Idea I have already implemented it on my bike. Will try to show in some vide.
I got away with that.. Just reduced pitch of both horns and connected +ve with +ve and -ve with -ve.. Worked well thanks for considering though 😊
awesome..bro..
smart idea ;)
Nice one my friend
Which bike is it
Pulsar 200 NS
Bhai plzzz after 30000km 200ns ki full servicing review kr do taki mai dekh kar krwa saku
Which bike is that?
It's a Pulsar NS200.
Hey! We have the same name and profile pic.
Zyad Hasan coz it's u only
bhai tune battery bhi chnge kiya ?
No
I clicked on your video to learn how to make a cruise control. Three minutes in and you haven't even mentioned the topic. I suggest that for your next videos you learn to get to the point and learn how to hold a camera still.
awesome