You can chain multiple sensors together (or use a turret as a sensor -"has target") using xor switches Daisey chained together. As the xor doesn't use power currently. Downside to this is that if two sensors are triggered at the same time the pass through won't happen. To take this even further the rust plus app has that ITTT thing which can be used to send messages on discord or other things. I tried making a video on this it didn't work out that great.
The last part was majestic, rendering the other 5:16 pretty much useless. (But be careful, some raiders dont kill people sleeping, tho in the example at the end, they'll have to kill you to blow up your door.
Hi!, it say's its inactive on my phone but I definitely have enough power from the solar panels and battery going into the electrical branch and so forth, so now I'm just stuck. If you could help that would be great
What do you think would be the best way to wire up multiple heartbeat sensors to trigger the same raid alarm? I had each HB sensor hooked up to its own broadcaster, which were all on the same frequency. Is there a better way to do this without having to craft a broadcaster for each HB sensor?
Set up a chain of blockers on one line. Each hbhf sensor goes into one of these blockers. The entire line blocks a signal which is meant to block the smart alarm. By blocking off the smart alarm's blocker, you are essentially triggering it
Short answer is No. You shouldn't rely on the sensors to pass-through power to other components in a series. The HBHF sensors maximum throughput in any scenario is equal to the amount of players that have been detected with respect to its max output. The output for your HBHF sensor should ideally/always connect directly to an alarm, because most components will eat up that 1 power that is sent when a single player is detected.
1:29 this is exactly what im doing and my HBHF sensor shows its getting 2 power but then its not allowing any power to go from the HBHF sensor to the smart alarm. What am i doing wrong?
I have it set up so 1 smart switch controls the garage doors and the other controls the turrets for the outside of my base and one for my doors cause having to open and close 20 garage doors is annoying they all go with one tap now
Hi Salty. I love your duos with Bloo. I have a request. Please share the garage door circuit you made for Big Bertha. I tried to make one to "authorised personnel only" and failed. Thanks maan.
Wait so all u need to do is just get off in your airlock and it will Give you a. Notification if you die if you are paired with the server or do you have to set up electricity at all
I'm late and you probably already figured it out but if you already paired the rust+ app to your steam, then yes you will get a notification if you are killed. (You have been killed by "name")
@@rafkat911 Add a switch on the same wall that you have sensor on. Turn that switch to "1" and keep it like this. Connect the switch's output port to "Block passthrough" port of a blocker, and connect another power source "1" to input of blocker. Finally, connect output of blocker to alarm. This way, when someone blows up the wall with sensor, the switch will also be destroyed. Thus, the "Block Passthrough" of blocker will turn to "0", which will allow the input to pass to output and to the alarm. In short - if someone blows up the wall and sensor, you will get constant alarm "Base Breached" (or anything you want it to be)
![Как быстро развиться С НУЛЯ в [Rust/Раст] - ПОЛНЫЙ ГАЙД](/img/n.gif)
Very well edited, clear instructions and short. Great video!
but cant hear due to excessive background music. xD
I don't understand why people dislike, hella helpful and super friendly, definitely gets a like from me :D
You play rust, but still don’t understand that some people are just assholes?
@@RandyQuaker true tho
They are the people who are to scared to do a online raid
they dislike cuz they arent able to follow this video LMAO bunch of dingbats
Sadly i still have a mechanical hardrive so even with a notfication, i will not be able to save myself
Game takes like 10 min to drop in with 1080 lol
@@timberousek12 like to load in the game then the server?
@@timberousek12 Loading in time is determined by your hard drive/SSD not graphics card.
Takes more than 1 hour and a half for me
@@sexymonkey1198 part of it is.
Dude your videos are so in depth. Good job man
Lot of effort put into this. Nice vid as always
Super informative, easy to understand. Thank you!
You can chain multiple sensors together (or use a turret as a sensor -"has target") using xor switches Daisey chained together. As the xor doesn't use power currently. Downside to this is that if two sensors are triggered at the same time the pass through won't happen.
To take this even further the rust plus app has that ITTT thing which can be used to send messages on discord or other things.
I tried making a video on this it didn't work out that great.
Is there a simple way to connect it to your own devices? Like for example can rust app send a request to your own custom api?
super helpful and clear thanks
SALTY,i just discovered you and wanted to say you have some clean af editing.Keep it up
Omiae ty my man 🙏🏻
Salty I agree w/ him!
Imma still find a way to mess this up
Ok so when I try to pass power through the hbh sensor to the smart alarm it just doesn’t have when even though it’s connected
It has to detect someone to get get power to your alarm then it will notify you
Thanks for the video man!
Great vid bro loved it
Tx dis help a LOT
👁👄👁Me waiting for salty to pump out some good good content
👀
Hey bro congratulations on 5k subscribers love the videos hope to see more
that ending was a BRUH moment XD
Helped a lot thanks
Keep up the good content!
The last part was majestic, rendering the other 5:16 pretty much useless. (But be careful, some raiders dont kill people sleeping, tho in the example at the end, they'll have to kill you to blow up your door.
Almost a year after being published and I think your the first one to point out that joke!
only smart youtuber on rust thank you it took me forever to understand this shit
Hi!, it say's its inactive on my phone but I definitely have enough power from the solar panels and battery going into the electrical branch and so forth, so now I'm just stuck. If you could help that would be great
Same
What do you think would be the best way to wire up multiple heartbeat sensors to trigger the same raid alarm? I had each HB sensor hooked up to its own broadcaster, which were all on the same frequency. Is there a better way to do this without having to craft a broadcaster for each HB sensor?
Set up a chain of blockers on one line. Each hbhf sensor goes into one of these blockers. The entire line blocks a signal which is meant to block the smart alarm. By blocking off the smart alarm's blocker, you are essentially triggering it
very great video my dude
We 👏 want 👏 real 👏 content 👏 (but this is also good)
Fletcher as good as good gets
Just because this isn’t your favorite of his content doesn’t mean it’s not real content...
@@JG-mv4vs when he says real content it means he wants Real Content because this video didn’t work for nothing worked
@@Fulmer_Flickz english only...
Thanks for the great content ^^
i needed this
Can multiple HBHF Sensors be connected by one connection passing through and finish up by one alarm???
Short answer is No. You shouldn't rely on the sensors to pass-through power to other components in a series. The HBHF sensors maximum throughput in any scenario is equal to the amount of players that have been detected with respect to its max output. The output for your HBHF sensor should ideally/always connect directly to an alarm, because most components will eat up that 1 power that is sent when a single player is detected.
Well I have a question. What if someone will go through the walls and you have sensor at doors? You won't get notifications?
1:29 this is exactly what im doing and my HBHF sensor shows its getting 2 power but then its not allowing any power to go from the HBHF sensor to the smart alarm. What am i doing wrong?
Very useful thx
So much simpler! I watched another guy and he said use a memory cell. I don’t see the reason for it and it was confusing me
Thank you
Sick. Subbed.
Can you do one with smart switch on how to use it like how u show step by step with power battery and so on
Never went over if I can pass through the first sensor into another and the wats on that branch…
If the raider destroys the sensor or the turret without being seen by either, will it still send some form of alarm to my phone?
Great vid
do i need the sensor alarm ? or can i just use the alarm it self and connect it ?
Do you get a notification sound when alarm is triggered bc i don't
you a rust electrician now?
Can you set it so you can manually close/open doors through the app?
smart switch connect to door controller
Salty and lastly, can you remotely turn on turrets through the app?
Sheath yes. Anything you connect to a smart switch can be remotely turned on/off from the app.
I have it set up so 1 smart switch controls the garage doors and the other controls the turrets for the outside of my base and one for my doors cause having to open and close 20 garage doors is annoying they all go with one tap now
Doesn’t it automatically tell you if a door is broken?
When I put power in the HBF sensor then when I put it in power out it generates 0 electricity
Same
it will only power out 1 power when it detects unauths, that 1 power reaches alarm and then it sends u notification.
Thanks
turn of the music
Hi Salty. I love your duos with Bloo.
I have a request. Please share the garage door circuit you made for Big Bertha. I tried to make one to "authorised personnel only" and failed. Thanks maan.
Wait so all u need to do is just get off in your airlock and it will
Give you a. Notification if you die if you are paired with the server or do you have to set up electricity at all
I'm late and you probably already figured it out but if you already paired the rust+ app to your steam, then yes you will get a notification if you are killed. (You have been killed by "name")
Do u still get the notifications when u are online
I miss his vids but he quit 😥
he got banned lmao
bro your voice over audio is way low. i turned CC on though. TY!
If raider destroys the heartbeat sensor from a distance (further than 20m), will I get notifications on my phone?
No. However, I think on the phone app it’ll say that the smart alarm is disabled.
@@SaltyTaco yes, i tried it out myself, problem is u have to open the app to know that its disabled
Bt thnx for the reply man
@@rafkat911 Add a switch on the same wall that you have sensor on. Turn that switch to "1" and keep it like this. Connect the switch's output port to "Block passthrough" port of a blocker, and connect another power source "1" to input of blocker. Finally, connect output of blocker to alarm.
This way, when someone blows up the wall with sensor, the switch will also be destroyed. Thus, the "Block Passthrough" of blocker will turn to "0", which will allow the input to pass to output and to the alarm.
In short - if someone blows up the wall and sensor, you will get constant alarm "Base Breached" (or anything you want it to be)
@@TheAndreas50 thnx alot for the suggestion man, gonna try it on build server..
Amazing
Whoops never mind it works
Why when I do this it doesn’t send any power to the gas target
I dont get a notification when i walk trough the sensor?
Do this work, because I tried to build something that look similar to this, but I didn’t and I got offlined
Jenga June try again
Can you do this on console
best fucking guide
now can i make this a speaker and make it wake me up to???
POG!
wait so if i dont have smart alarm and i get raided i dont get a notification?
A smart alarm is required to send notifications from the game to your phone.
@@SaltyTaco ah i see so i dont get a notification if i get raided unless i have a smart alarm thanks
my smart alarm just says "too many people are using this notification", what is this?
I don’t need a smart alarm the app tells me anyway I was getting raided like 20mins ago
bruh i was playing rust at the time i thought i was getting raided lol
I forgot to put the 2 in the green thingey and i was about to log in to change it and i got raided:(, it had like 4 players online
Do more vids pls
What do I do if on the app it says inactive?
Means your smart alarm/switch is either not getting any power, or has been destroyed in-game
I would 100% be at work and not be able to do anything about it anyway… this is why i try to get along with neighbors.
It’s better to know your raided then hop on with the rocket death
mine only works when auth people are included
it just turns of when i exclude auth people
@@bero3936 same here
2 years ago last video...
:/ life
Was looking for this comment g
If u are sleeping and get on cus ur getting raided u rly need to stop playing rust..
If you got nothing important next morning why not, best part about the game
post more vids dood
WOOooooo
Too many players subscribed to these notifications , thats what i get when i pair the smart alarm
I believe the max you can have hooked up to an alarm is 4 ppl :/
Salty we only have a duo and it’s only on my rust app
My smart alarm keeps on saying its been triggered
Make sure it's set so only non-authorized players can trigger it!
Why did you quit? I miss you man
Bro are you going to upload more??, are you even alive?
no shout out disliked
best supporting actor 🥇
Poor you good acting loved it :D
this ruined the game my guy
Pro tip: put battery inside