How to install a Tail light bulb on Hyundai Elantra 2017
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- How to install a Tail light bulb on Hyundai Elantra 2017
here's the link for the bulb on Amazon
This is the brake light/running light bulb 7528
amzn.to/44qBcaq (paid link)
Reverse light bulb 921
amzn.to/44lanEs - ยานยนต์และพาหนะ
¡Gracias!
Hyundai dealership used duct tape to wiggle the housing out for me. It worked like a charm!
Interesting I'll have to give that a try
Easiest instructional video I’ve ever seen.
That's my goal with all my videos! Thanks for watching
As a young woman who likes to learn to do things on my own, this was the easiest thing I’ve done. Thank you 😊 even though the light was giving me hell at first lol
I'm so glad I could help! You just got to get in there and do it!
Thank you soo much for this! Because of you, I was able to change my lights by myself without any issues!
That's awesome. I'm glad I could help! Let me know if there's anything else you'd like to know!
Great video but as others have discovered removing the cluster is often very difficult but after experimenting I finally found a repeatable method to remove the rear cluster. First remove the 2 retaining nuts from the back of the unit and unplug as shown then gently slide a luggage strap behind the front and another behind the rear of the light unit. Then pull both straps at the same time from the back of the car. This is similar to the solution posted elsewhere using zip ties but the luggage straps are far stronger and give you more leverage. No heat or hammers required. Good luck.
We didn’t have luggage straps, so we tried heavy string. Worked great, thanks!
Holy shit one take and absolutely no filler. Beauty video!
My biggest pet peeve is long intros and people talking about irrelevant stuff in tutorials... So in all my videos I get straight to the point and then put in some blah blah blah at the end.
This was a very helpful tutorial. Followed it to a t and successfully replaced the bulb. Thank you very much!! 🙏
Awesome 👍 thanks for checking out the channel!
Wow, watched this video, said to myself... Yeah, this is simple enough. I went to Advanced Auto Parts, got the bulbs, replaced the bulb and light went off. Within 30 minutes, job complete. This video was PERFECT, thank you!
That's what I like to hear! Taking care of business!
Thanks for the video, boss. Fixed my brake light despite being very bad with cars!
Saved me a lot of time. Thanks.
You're welcome. Follow us for more tutorials and let us know if there's anything you would like to see
thanks so much, the circular motion for the removal was the trick I needed.
Replacing a brake light bulb shouldn't be this hard. Mine is seriously stuck. Replacing the front bulbs was nothing. Before posting this video you must've been at it for hours with your brake lights. As for me I've officially run out of patience. I appreciate your help, but I'm off to the mechanic. I'll pay them to cuss at it.
Couldn't agree more. Shouldn't be this hard but it is. F ing Hyundai
Wtf me too dude!
Never buying a Hyundai again. Now I understand why people look down on this brand.
Same, I live in Australia.
I don't know if there is a difference, between, left hand drive and right hand drive Elantra's. . . BUT there's some white coloured clip, that's stopping me from getting the back light cover off.
I gave up, I tried for an hour too get this clip undone.
Plus there's no mention of this clip in all the videos I watched.
@@incremental_failureThey are awesome cars, the only problem is this brake/tail light. This car of mine is the best car I've ever owned.
Thanks for the video
Hey no problem
Thanks for the great video. I was changing out the bulbs for a friend who was struggling with it. I knew there had to be something else holding the lens assembly besides the two nuts. It was just as I expected. Two pressure nipples making it difficult., but finally got it off and repaired.
That's awesome that you got it out I'm glad I could help. Next time I change it I want to try a suction cup handle on the lens hopefully that will help get it out
What did you do with the pressure ripples to get it off?
This taillight must have already been loose for you to get this off prior to the video because I followed to the T and it's not coming out. Nut are removed.
Having the same issues
THANK YOU!!!
Hey no problem!
I finally got it OMG that was tuff for something so simple I got my sledge hammer out fixed it right up. All brand new now.
One thing that may help is heating up those rubber plugs to help with removal.
I did this video in the summer time and it was tough to pull out but not terribly difficult no sledgehammers were needed. But winter time maybe a different story
@@fix_stuff_make_stuff yeah I watched another video that said tap the screws with a hammer it took a little more then a tap but it came free and it is the first time changing this light too. It was not budging without
No way. You obviously loosened that previously. I spent an hour trying to get that damn thing off.
No actually that was the first time we pulled that off. It's all about the finesse gradually pull and go in circular motions to pop those rubber nipples out
Thanks pal. Excelent explaining. Help me a lot.
Awesome glad to hear!
Thank you for this great instructional video!!
You're welcome let me know if there's anything else you'd like to know about the Elantra.
1:38 I’m having a hard time getting mine to come out. I can’t grip my hand on the back like you did. Is there another way?
You may be able to use a plastic pry bar but I found if you can just get a little bit of wiggling and pulling straight back like in the video is the best way.
I’m having the same problem, did you get it figured out?
@@austinduff7317 I've gone out to do it twice and I couldn't get the light unit off. I like this video because of how he instructs us to remove it from that clip. I saw another video on youtube. That one the guy used shoelaces to wrap around the taillight assembly unit to remove it. I'm determined to spend the rest of my afternoon getting that taillight assembly out!lol. its that clip at the front that makes it so hard. I like how he explained the procedure to remove the taillight assembly,
th-cam.com/video/L_wF23vkGNo/w-d-xo.html
You made it look so easy. Then I gave it a try. Been trying for an hour and a half. I don’t want to give up because I need a brake light but damn. Great video on how to do it but when it’s the first time it’s being taken off the car it’s on there tight.
Right side came off with a fight- the left side feels cemented on. Crazy that it’s so difficult to change a bulb.
One thing that I thought about after I made this video is that those rubber gaskets that hold the light in will be harder in colder weather. It might be a good idea to put a heater or blow dryer on it to soften them up. Disregard this if you live in a warm place...lol
Yup, just did it. Broke the stupid clip at point of the tail light. It wasn’t coming out otherwise.
There was a time when you could just pull off the inside cover and then twist the bulb holder without having to take the entire assembly off. A quick simple 2 minute job. Now they are designed so if you do go to the dealer they will charge an hours shop time labour to replace a one dollar bulb. Cars designed for the dealer service department to make lots of money.
My 2011 Ford Fusion had flaps at the back inside the trunk. Pull them back and twist the light out, replace and reinsert. Job done. No tools.
Very helpful. Thank you for sharing this
I'm glad I could help!
University of TH-cam saves the day again
I don't think I'll ever graduate but that's okay.... 😆
Awesome vid. Does that bulb function as a tail and blinker light? Not sure if I understood correctly. Thanks.
I believe it's a dual filament bulb that gets brighter as you apply the brake and runs as the running light and the brake light
@@fix_stuff_make_stuff Great. Thanks for the input. Cheers.
This video is excellent.
Thanks! This helped out a ton!🤗
The light on dashboard didn’t disappear after changing the bulbs… could it be something else?
But how did you get your fingers behind the light to pull away
After you remove the bolts there should be a little bit of play in the light to get your fingers under
I installed a single contact bulb instead of a double ended one just to try out if it works. To my surprise it did but the other to lights next to it wont work until its night and the headlights are on. I guess the double ended bulbs help turn the other two brake lights turn on
That's nutty!
I don't know if there is a difference between left hand drive and right hand drive Elantra's.
I live in Australia and on my 2016 Elantra, there's two nuts and some sort of white clip. That white clip is the problem, it will not budge. I cannot get the tail light cover off.
I watched the 2017, and that looks closer to my Elantra. But still no white clip.
Mine is stuck 😩😩 I’ve been trying for hours
Remember to make small circles as you're pulling directly back. Also you can buy a small suction cup to get better leverage from harbor freight
This is ridiculously difficult for a simple bulb. It shouldn't be this hard. Tried your way several times to dislodge the light.
Is it cold where you live? If those rubber gaskets that hold the light in our cold it makes it substantially harder
@@fix_stuff_make_stuff He's actually rite my 2017 brake light does not come off like the one in your video I tried the wiggle idea nothing and no room on mine to get any fingers in
What it won’t come off? Like it’s got screws in holding the light.
Another hack that I found is using a small suction cup handle when you're pulling directly back make sure you're doing circular motions to pop those plugs out.
This shit drained me like a lemon 😂
I'm sorry, But there's one true fact in life stuff breaks all the time.
@@fix_stuff_make_stuff just returned after changing it. Car insurance renewal is tomorrow. Hopefully it gets passed in the first attempt 😂. Btw, are there any performance mods that can be done on this model?
1:48 Perfect joke and nice Goofy's laugh ;p
Thank you. Here at fix stuff make stuff we strive to be as mature as possible......
Anybody have a third light in the cluster. Mine is out and it looks weird. I want to replace but bobody is bringing it up as something that meeds replacing
unable to budge it, does not come out, tried for half an hour,
Well, I took mine out... it only took me 10 minutes, but i dropped the entire case. Now, it is going to cost me 100 plus dollars to replace it 😂😢 That shit is tight and takes lots of force to remote it and is hard to hold at the same time. My suggestion is to have someone else be next to you, so if the case slips out of your hands the other person can grab it. Also, dont use uniform while doing it 😂😂😂... get comfy clothes... hard work to pull it out.
After over an hour and a half I finally got it off and broke the clip you warned us of. Oh well though at least it is back on and next time it will be easier to take off. Clip shmip who needs it? Lol
My next video I want to make is using a suction cup handle I found on Amazon to be able to pull directly back without the clip breaking. And you can always duct tape it back on lol
Is it still secure after the clip is broken? I’m about to break the damn thing on purpose
I am I the only one who noticed the hand grenade in the trunk! 🙂
You found the Easter egg sir!
Another useless video. My taillight will not come off no matter what I do. Where is a video for this problem? I have everything removed and using all of my strength and wigling it I can't budge it.
Thanks for the kind words! Did you see the part where I said when you're pulling you need to do a circular motion. You're fighting against sticky rubber that you don't just yank. Best of luck!
The cover is too hard to come out. Lucky Walmart doesn't charge too much to change it.
How sorry to hear that. The next video I want to make is using a suction cup handle I found on Amazon to be able to pull it out a lot easier.
Im unable to remove doesn’t matter if i hammer it out from inside or wiggle it please help
They can be in there pretty stiff as you're pulling back try to wiggle in a circular pattern.
@@fix_stuff_make_stuff i have tried for hours and full force to slide it back but it’s stuck i almost wanted to smash the light so bad its freaking annoying tried wity zip ties too and whith shoe lace check everything on youtube but still didnt came in
@@sahilvij2671 Hope you got it ;)
I did it yesterday with the help of a rubber spatula for pushing the front end. It helped a lot.
Same here...given up on this crap
No matter what i do i can not get the lens off.
How cold is it where you live?
@@fix_stuff_make_stuffit's very cold. Just had snow too. I finally got it off after an hour. I'm a big strong guy and I struggled. 😅 Used a circular motion and even the duct tape on the lens to pull trick that others posted and no luck. Finally it came off. But thanks for posting this video. Mechanics charged a friend a $125 in labor to do the same thing.
@@michaelshawjr66 I started getting a lot of comments that it's hard around winter time I think that the rubber gaskets get much harder in cold weather and you might be able to soft them up with a hair dryer or pull it into a heated garage.