I have the 4 channel nvr wifi kit (WIFI3608PGE4SW200) and have some questions: 1) Can I connect the cameras via rj45? nvr only has one rj45, so how do I connect cameras to router and then setup nvr to read from that? 2) Can I replace a camera with a 360° camera?
Thanks for the video. I have some questions. 1. Can I change the IP address of the NVR and IP camera to match with my router IP's? 2. How do I set up email alert when motion is recorded/detected? I tried putting in Gmail/Hotmail SMTP but still not working. Cheers.
Hello Todd. Thanks for your questions. We're going to answer them one by one: 1. You can use the SearchTool which can be downloaded at www.herospeed.net over PC. Connect router with PC after searching the device over the SearchTool. View the IP address and be consistent with the addresses of Gateway, DDNS and Subnet Mask. Change the IP address of NVR to the different number from the last segment, for example, the network address is 192.168.0.X, you should change the "X" to random number. After changing, have double click on NVR to the webpage. If it can be accessed, it means NVR has successfully been connected to router. FYI, Those steps mentioned above are also available to IPC too. 2. Use the SearchTool to search IPC and log in. Click Configuration, Network, and SMTP. Enter the sender's Email address and domain name which should be the same with your email's. Enter 465 at Port. Check Server. Enter your email address again for the account and also the authorization code by SMTP down there. Enter the receiver's Email address ( suggest that it's different from the sender's), and save. Last but not least, go to Events where you can find from Configuration. and check SMTP from Linkage at Motion Detection. Hope this would help. If any questions still, please feel free to comment. Have a great day.
@@longsetechnology4520 Thanks. Can I plug the camera directly to my router (LAN port) and use IPC? My NVR cannot find the cameras now (through its wifi). IPC model is LBH30S100W4.
hello I ask you I have the longse XVRDA3108D, which suddenly appears a window that says FORGOTTEN PASSWORD on its tab, which asks you to complete some fields with the password. If you want an unlock pattern and some questions, I completed this, I put record, close but this screen continues to appear in the center of the screen covering part of the images, you close it and after a while it reappears, how do you deactivate this little window, can you help me? Thank you
@@longsetechnology4520 never got answer on that mail. on windows 10 + IE there is no picture on live preview. on windows 7 + IE it all works. all in all it's fine security system for the price. I have 3 NVR installed with cameras in my company.
@@dragec314 Hi Sunflare, our team didn't receive you email, it might be blocked. could you please send it to marketing@longse.com or leave your email add?
What is the recommended SearchTool analog tool for GNU/Linux?
I have the 4 channel nvr wifi kit (WIFI3608PGE4SW200) and have some questions:
1) Can I connect the cameras via rj45? nvr only has one rj45, so how do I connect cameras to router and then setup nvr to read from that?
2) Can I replace a camera with a 360° camera?
Hi Adrian, thank you for buying Longse products. Any technical support please contact support@longse.cm. Tks!
Thanks for the video. I have some questions.
1. Can I change the IP address of the NVR and IP camera to match with my router IP's?
2. How do I set up email alert when motion is recorded/detected? I tried putting in Gmail/Hotmail SMTP but still not working.
Cheers.
Hello Todd.
Thanks for your questions. We're going to answer them one by one:
1. You can use the SearchTool which can be downloaded at www.herospeed.net over PC. Connect router with PC after searching the device
over the SearchTool. View the IP address and be consistent with the addresses of Gateway, DDNS and Subnet Mask. Change the IP address of NVR to the different number from the last segment, for example, the network address is 192.168.0.X, you should change the "X" to random number. After changing, have double click on NVR to the webpage. If it can be accessed, it means NVR has successfully been connected to router. FYI, Those steps mentioned above are also available to IPC too.
2. Use the SearchTool to search IPC and log in. Click Configuration, Network, and SMTP. Enter the sender's Email address and domain name which should be the same with your email's. Enter 465 at Port. Check Server. Enter your email address again for the account and also the authorization code by SMTP down there. Enter the receiver's Email address ( suggest that it's different from the sender's), and save. Last but not least, go to Events where you can find from Configuration. and check SMTP from Linkage at Motion Detection.
Hope this would help. If any questions still, please feel free to comment. Have a great day.
@@longsetechnology4520 Thanks for replying. It helps.
One more question, how do I reset this particular camera (bullet) back to its default values?
@@todds9384 Hi Todd. Log in the IPC by SearchTool then go to Configuration, System, Settings, Maintenance then Restore Factory Settings.
@@longsetechnology4520 Thanks. Can I plug the camera directly to my router (LAN port) and use IPC? My NVR cannot find the cameras now (through its wifi). IPC model is LBH30S100W4.
@@todds9384 Yes, you can Todd.
hello I ask you I have the longse XVRDA3108D, which suddenly appears a window that says FORGOTTEN PASSWORD on its tab, which asks you to complete some fields with the password. If you want an unlock pattern and some questions, I completed this, I put record, close but this screen continues to appear in the center of the screen covering part of the images, you close it and after a while it reappears, how do you deactivate this little window, can you help me? Thank you
I have Longse nvr3008dp, couldn't enable P2P,
Stands??? 2GHZ , 5GHZ , 900MHZ or 1300MHZ?
Sir I lost lost my xvr password model number 85-XVR04,
How to reset the password?
Nvr model?????
Device does not exit code :2054
HOLA SUBTITULADO O EN CASTELLANO POOR FAVOR
Browser plugin is not working under Windows 10.
plese try with IE browser, more questions please contact support@longse.com. thank you~
@@longsetechnology4520 never got answer on that mail. on windows 10 + IE there is no picture on live preview. on windows 7 + IE it all works. all in all it's fine security system for the price. I have 3 NVR installed with cameras in my company.
@@dragec314 Hi Sunflare, our team didn't receive you email, it might be blocked. could you please send it to marketing@longse.com or leave your email add?