Building a golf cart seat in 6 minutes
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Building a golf cart seat in 6 minutes
If you want more detail than what is in this video, you can watch the three part series to find more in-depth information. Thanks for watching and if you have any questions or comments, feel free to leave them below.
Here are the products that I used in this video:
White polyester thread
amzn.to/2XtABEw
Blue polyester thread
amzn.to/2WU9uOP
White Vinyl
amzn.to/2WWT3kS
4" Upholstery Foam
amzn.to/35IJNI6
#upholstery #golfcartlife #diy
Awesome job!
Thank you!
Great video! As already stated if you do this add vent holes in the bottom. Over a short time people who sit down fast will blow out the seams or rip the staples on the cover the air has nowhere to go. It also helps drain if it gets wet inside..
Thanks for the insight! Good points! Thanks for watching and the valuable feedback!
DC,
Amazing job on the seat.I just bought my 1st project GC.
1985 Club Car DS. Please tell me the color of the paint on said cart.
Again thank you
I was doing this job for someone else. I don't know what the actual color was other thank blue 😂 sorry. Thanks for watching, the feedback, and the support!
ps. I just subscribed
Dude thanks for making this video exactly what I needed to finish my golf cart and the links very appreciated job well done 👍🏻. Have an awesome day. Thanks 🙏🏻
Would it be good to put a couple of vent holes in the plywood seat?
Yes, that would allow the foam to breathe and "fill" back up quicker and rebound.
I need to find those nuts you hammered in in the beginning what are they called
T-nuts you can find them at Lowe's or any hardware store. If it's going on a boat, make sure to use stainless steel hardware.
www.amazon.com/dp/B01LFFB4BW/ref=cm_sw_r_cp_apa_i_a1VtFb3NFW7CT
What cart is that?
I don't know for sure. I was just given the frame and then I put it on when I was done. I'm guessing a Yamaha or EZ-GO. It was gas.