Buuu hace 3 meses comencé con Revit, y estoy haciendo mi primer trabajo pago con Revit, estoy muy contenta pero también asustada... debo hacer una cubierta en forma de hoja. y con la estructura similar a la que enseñas. quiero que quede bien bonito y estoy feliz de encontrar quien me enseñe bien lo paramétrico, ya logre conseguir buenos cursos de Revit, pero creo que no explican bien cosas asi super locas como lo son los diseños paramétricos estoy contenta confió que todo salga bien... Muchas gracias Saludos desde el PAIS COLOMBIA...
Buenos días. Me alegra mucho saber que puedes lograr algo increíble basado en lo que hago yo. Todo se reduce a la perseverancia y la imaginación. Revit ofrece la oportunidad de hacer la misma cosa de cientos de maneras diferentes. ¡No dejes de aprender y alcanzarás grandes alturas!
You're the best!! you know how to make it easier for us to follow along. Best tutorials on youtube ever. I've been searching on making this thing all day long and now it's 1 am. I figure it out just right at 10 mins vdo.
Очень полезная информация, понятная концепция, уникальные знания. Спасибо большое, продолжай в том же духе. Судя по коментам, весь мир благодарен тебе) Привет из Туркменистана)
I TRY IT BUT THE RESULT WAS THAT: THE FACE WHERE THE GLASS PANEL BECOME DOWN ANS STRUCTURAL MAIN ELEMENT WAS UP. WHAT IS THE WRING WITH IT? IS THERE WAY TO SOLEV IT
Не получается сделать вспомогательные даные для семейства, например задать диаметр элементов, так чтобы их можно было менять напрямую в проекте, во время редактирования формообразующей. Пока что приходится переходить в изменение семейства
Thanks Niko very good video, but in my case top part of truss (pattern model) is not perpendicular with botom rectangles when i import to mass roof..i lost 20 hours nobody seems to have that problem..could be the top reference lines locked somehow??
How fit single concave lens on geodesic model? I have successfully made geodesic model but now I am looking to fit single concave (freshnel lens) on it!
Hi thanks for the video, just one question, when i picked the family into the grid system, the module is linked on the bottom, but upside always ends unlinked, like the 4 corner wont ever join...could you tell me what i am doing wrong?
This is amazing. Thank you so much for this tutorial. Sometimes I get confused when to use reference points or model points, or ref lines or model lines? How can I decide which to use?
After creating a tube with the circle and the reference line, when I change the radius of the circle, the tube doesn't change equally, just only the middle circle changes but not the two ending circles of the form, how can I fix that? However great job Niko.
great video. i have a problem. when i select the family pattern it show me error "Can't make type "Rectangle : Family5" and i cant finish modeling. please help me.
Thanks! But I have a question... does it works for the planar surfaces too? I mean, I'm making a roof with no curves, only planar surfaces, does this work for that purpose too? Thanks again!
I tried applying this family into a different shaped Mass, and there is an error popping up - Can't make type "Rectangle : Family4". Do you know what the problem could be?
I was doing this exercise but then when i did it i don't know why my revit doesn't join the interserctions. Because it looks like the parameter it is floating in the air... 😥
I have one model to do which is about 180M long on X axis and 40M perpendicualr from the centre of X axis. Points on X axis starts from 0m and goes to 16M high which meets the 40m pt and comes back to 180m pt.. How can i do this.? Sorry if I confused you. Thank you
I did exactly what you did, but when I'm trying to apply the pattern, an error message appears "Can't make type Rectangle: Family2. What seems to be the problem?
I did exactly what you did, but when I'm trying to apply the pattern, an error message appears "Can't make type Rectangle: Family2.only thing i changed is i worked in meters but on the proper dimension waht seems to be the problem?
Hey Niko, I followed your instructions to create a parametric truss system for my conceptual mass, but when it comes to insert the family into the patterned surface, the structure does not adapt to the curves, it just appears on top. Wish I could send you the picture! Please help!
i still stuck at the last part where the error keep popping out when i apply the family. i have adjusted the U and V value but it still the same. Anyone know how to solve this ?
Those are acctually hollow inside. So if I as a structural engineer need to create those and then do analysis in Robot wich is part of BIM environment how I'm suppose to do that on some "form" . .....
Прекрасное видео! Единственная проблема: если менять толщину стержней через параметр, то у стержней толщина становится неравномерной по длине, т.е. если увеличить значение параметра, то стержни будут как бочки( Объясните, пожалуйста, как решить эту проблему!
Добрый днь! спасибо вам. На самом деле легко, нужно заблокировать профиль в семействе для стержня и тогла при изменении толщины она будет равномерно изменятся по всей длинне
Hello, anybody help me please. Is Revit capable of doing like what I did with Sketchup? ( in Sketchup ) I created a complete house with roof etc, group it then make it one component. Then I do multiple copy ( like a terrace house ). Now, if i edit any of the component, the other copies will change. Can i do this in Revit? Please link which YTube tut video to me.
i have followed all these steps and everything went smooth but in the end when i entered the surface pattern it din't come as in your video. plz tell me the reason behind it.. is there any error in my drawing?
Check, my new video about 3D section view:
th-cam.com/video/Exj28Q0oadc/w-d-xo.html
Ahh you are such a decent architect, you even recorded sound in fallingwater house!
I am amazed Niko. Great video. Easy to understand, fast as needed and covering the details. Keep doing it . Following and sharing.
Thank you so mush.
Spaceba Bolshoi! You and Balkan Architect are brilliant. Cheers from Australia.
Buuu hace 3 meses comencé con Revit, y estoy haciendo mi primer trabajo pago con Revit, estoy muy contenta pero también asustada... debo hacer una cubierta en forma de hoja. y con la estructura similar a la que enseñas. quiero que quede bien bonito y estoy feliz de encontrar quien me enseñe bien lo paramétrico, ya logre conseguir buenos cursos de Revit, pero creo que no explican bien cosas asi super locas como lo son los diseños paramétricos estoy contenta confió que todo salga bien... Muchas gracias Saludos desde el PAIS COLOMBIA...
Buenos días. Me alegra mucho saber que puedes lograr algo increíble basado en lo que hago yo. Todo se reduce a la perseverancia y la imaginación. Revit ofrece la oportunidad de hacer la misma cosa de cientos de maneras diferentes. ¡No dejes de aprender y alcanzarás grandes alturas!
You're the best!! you know how to make it easier for us to follow along.
Best tutorials on youtube ever.
I've been searching on making this thing all day long and now it's 1 am. I figure it out just right at 10 mins vdo.
Очень полезная информация, понятная концепция, уникальные знания. Спасибо большое, продолжай в том же духе. Судя по коментам, весь мир благодарен тебе) Привет из Туркменистана)
Нет ничего приятнее чем когда люди благодарят) вам спасибо!
Your tutorials are the best Please keep up the great work!. Congrats from Brazil!
Oh wow, this was really the entire thing in 10 minutes!! Amazing, thanks a lot!
Won't lie, from montreal here, loved that video.
Watching all your videos before my exam in Revit tomorrow, thanks haha!
Good luck! You will do it!
YOUR TUTORIAL WAS AMAAAZING!!!! please keep up the great work, thanks Niko!
You´re god to me
I cannot express how thankfull I am
always welcome)
The best one so far. Thank u so much been looking how to make this. U make it seem easiest!
Amazing video! Kept promise of learning parametric truss system in 5min! Thanks Niko!
thank Niko, you saved my life
Great tutorial. I appreciate you sharing this with the community.
Superb tutorial! Easy to follow. Thank you!
THANKS ALOT YOU SAVED MY THESIS PROJECT
Thanks for clear presentation, i understand it now on how to make these space frame truss. thank you.
such an amazing tutorial bro, thank you so much.
wonderful tutorial
Thank you!
Great video, so easy to understand as well, thanks!
Dude, that is awesome! Thank you for a great tutorial!
Wow Nikosha, kakoi ty molodec.=))) Thank you so much for sharing!!! Keep going !=)))
Bezumno rad videt' tebia,sovsem propala)
Y tozhee=))) Molodec ty=)) Budem jdat eshe video
PLEASE HELP! at the last step when i choose rectangle family 2, i get a warning saying "Can't make type error family 2". What do i do??
you're a life saver, thank you so much! this is awesome.
I'm glad to hear that)
this is the best one!! i love it
I TRY IT BUT THE RESULT WAS THAT: THE FACE WHERE THE GLASS PANEL BECOME DOWN ANS STRUCTURAL MAIN ELEMENT WAS UP.
WHAT IS THE WRING WITH IT?
IS THERE WAY TO SOLEV IT
I got it all right but idk why my structure is inverted, any tips to fix this?
if something going to wrong direction, create it upside down) Check parameters. and if not. try to follow my video 1 by 1 and than just modify it)
mine too. did you already fix that? can i get any tips?
nah, i get it. just click "component flip" on properties
very good example buddy...keep it up.....
Не получается сделать вспомогательные даные для семейства, например задать диаметр элементов, так чтобы их можно было менять напрямую в проекте, во время редактирования формообразующей. Пока что приходится переходить в изменение семейства
Странно. Давайте отправьте вашу модель на почту.завтра ознакомлюсь
Thanks Niko very good video, but in my case top part of truss (pattern model) is not perpendicular with botom rectangles when i import to mass roof..i lost 20 hours nobody seems to have that problem..could be the top reference lines locked somehow??
i was able to reach the final product but i wasnt able to get a continuous pipe. do you know why?
Can U make a second part of this type of structure please
like a Parametric rafter creation or
long span steel structure or smth like that
you did it very good...the only problem is you go very fasttt! haha. thanks and cheers
How to put the roof at the toop of this structure parametric?
holy fuckballs, where have you been all my days?
Bro thank you so so much 😭😭😭😭
I would like to ask if i load it to the project then is it possible that I can make a entrance like door for it ?
Hi Niko. In 2:55 when you draw those splines. Why u making them as splines and not as single lines? Is there a specific reason?
SUPER FUNKING AWESOME BRO!
YOU FUCKING NAILED IT!
THANKS A LOT FROM MEXICO CITY
Superb man 🙏👌👌
Wow and thankyou Niko!
How fit single concave lens on geodesic model? I have successfully made geodesic model but now I am looking to fit single concave (freshnel lens) on it!
great video but "Can't make type "Rectangle : truss system". - appeared while putting truss family on conceptual mass. please help!
Hi thanks for the video, just one question, when i picked the family into the grid system, the module is linked on the bottom, but upside always ends unlinked, like the 4 corner wont ever join...could you tell me what i am doing wrong?
Построенную таким способом конструкцию можно отправить в расчетную программу типа Лиры или Скада?
This is amazing. Thank you so much for this tutorial. Sometimes I get confused when to use reference points or model points, or ref lines or model lines? How can I decide which to use?
Brilliant video, thanks a lot
Akpe nawo kaka 🧡
After creating a tube with the circle and the reference line, when I change the radius of the circle, the tube doesn't change equally, just only the middle circle changes but not the two ending circles of the form, how can I fix that? However great job Niko.
@NikoG I have the same problem, I'd appreciate if someone gave us a solution)
Can you created a panel like the alianz arena stadium?
great video. i have a problem. when i select the family pattern it show me error "Can't make type "Rectangle : Family5" and i cant finish modeling. please help me.
Thanx Gentleman! it's much helpful..
always welcome.
Thank you Niko :) amazing
Thanks for sharing.. How can we make this frame analytical? for structural design
thank you keep up good work if possible its so helpful
very good
many thanks
Thanks! But I have a question... does it works for the planar surfaces too? I mean, I'm making a roof with no curves, only planar surfaces, does this work for that purpose too? Thanks again!
I tried applying this family into a different shaped Mass, and there is an error popping up - Can't make type "Rectangle : Family4".
Do you know what the problem could be?
for understanding what going on, you can send me your work file and I'll check it.
Niko G. i faced the same problem 🤔
send me ur file
Niko G. where?
How I can add the connection ball between boundary to transfer from wide circle to small circle to be realistic
great tutorial
I was doing this exercise but then when i did it i don't know why my revit doesn't join the interserctions. Because it looks like the parameter it is floating in the air... 😥
I have one model to do which is about 180M long on X axis and 40M perpendicualr from the centre of X axis. Points on X axis starts from 0m and goes to 16M high which meets the 40m pt and comes back to 180m pt..
How can i do this.? Sorry if I confused you.
Thank you
Wow, it's gonna be to have a model. ill try to do that long panel.Will see whats will happen
Thank you so much
And this video is clear and understanding.
Very helpful
thanks bro so much
Excellent sir
great work,thank u
I did exactly what you did, but when I'm trying to apply the pattern, an error message appears "Can't make type Rectangle: Family2. What seems to be the problem?
It looks like you need change the value of pattern. send me ur model ill check whats going on.
It's ok now sir! I did it! it's amazing! you're a genius! Thanks a lot!
can you tell me how you did it ?
Either raise the U and V grid number so there are more panels or the mass you created has a very sharp angle.
same problem here. Please help!
Nice video Niko.....was in dark in Conceptional mass And Adaptive. They are so important but difficult to understand though
U R AMAZING
hello, how to make tag in elements, for detail sheet
I did exactly what you did, but when I'm trying to apply the pattern, an error message appears "Can't make type Rectangle: Family2.only thing i changed is i worked in meters but on the proper dimension waht seems to be the problem?
for understanding what going on, you can send me your work file and I'll check it.
Отличное Видео, спасибо!
Hey Niko, I followed your instructions to create a parametric truss system for my conceptual mass, but when it comes to insert the family into the patterned surface, the structure does not adapt to the curves, it just appears on top. Wish I could send you the picture! Please help!
Nikog90@outlook.com send me ur file. ill try help asap.
Same happened to me. The top points don't seem to be adapting! Trying to sort it out now! Great tutorial though ;)
Worked out where I went wrong! Thought i was being clever by not setting the work plane when placing all the points! Thanks for a great tutorial
how did you fix that? im having the same problem
Did you solve the problem?? the same problem to me!! Please talk to me what I do!!
Hi, can you use Dynamo to do this Structure?
Nice Work
i still stuck at the last part where the error keep popping out when i apply the family. i have adjusted the U and V value but it still the same. Anyone know how to solve this ?
can you resolve it? I need your help! please
Those are acctually hollow inside. So if I as a structural engineer need to create those and then do analysis in Robot wich is part of BIM environment how I'm suppose to do that on some "form" . .....
hello could you please upload the family you made ?
Exellent! thanks for sharing
Hi niko , I have a problem to importing this parametric into my sketchup2017 (many holl on mirror) i hope you can fix this , THANKs
Hi Niko, may I know is there a reason you used Material Parameters in 6:00 than just assigning a Material to it? Is there a benefit to it? :D Thanks!
its to make the roof made of glass, if you go a few minutes back you will see he made a plane using the reference lines in the top.
great. u are the best .
Прекрасное видео! Единственная проблема: если менять толщину стержней через параметр, то у стержней толщина становится неравномерной по длине, т.е. если увеличить значение параметра, то стержни будут как бочки( Объясните, пожалуйста, как решить эту проблему!
Добрый днь! спасибо вам. На самом деле легко, нужно заблокировать профиль в семействе для стержня и тогла при изменении толщины она будет равномерно изменятся по всей длинне
@@NikoG Выбираю стержень, нажимаю "Блокировать профили", профиль исчезает, и теперь параметр не влияет на толщину профиля(
Hello, anybody help me please. Is Revit capable of doing like what I did with Sketchup?
( in Sketchup ) I created a complete house with roof etc, group it then make it one component. Then I do multiple copy ( like a terrace house ). Now, if i edit any of the component, the other copies will change. Can i do this in Revit? Please link which YTube tut video to me.
How is it possible to have dimensions of the pieces for fabrication? Thanks for the great Video!
where can I download Metric Generic Model Pattern Based for revit 2016? please help
It is default templates for Revit.
C:\ProgramData\Autodesk\RVT ####\Family Templates\English
thanks
i have followed all these steps and everything went smooth but in the end when i entered the surface pattern it din't come as in your video. plz tell me the reason behind it.. is there any error in my drawing?
"can't make rectangle-truss 2" - this appears in the end
THEY LIE
thank u so much bro
Nice video and great result. Quite a lot of noise on your mic through
NIko G.这个视频做的很好，就是背景噪音有点儿大。
Awesomeee!!!!! Thanks Bro.
I followed all of your steps but there was an error ( the panels are not connected to each other)
Good Video but maybe u can remove the static sound in the audio
Thank you
gracias, me gusto el video
thankssss
I LOVE U
THANK
Can't make type "Rectangle : family2"
hi, did you find a solution to this? i have the same problem