My DIY Weller WMRP soldering iron driver for RT tips
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Prototype of solder station for use with Weller WMRP soldering pencil and RT series of tips. These Weller tips are great but the UI of WD 1M and WD 2M stations is pure crap so I decided to make my own.
More information: kair.us/project...
Interesting but does it have any advantage over the welle rWMRS with the magnetic stand?
The only advantage is that you can build it yourself :) See also my newer video which shows the final version of my Weller station.
NICE! Do you have the pinout for the element?
+xwarp See here: kair.us/projects/weller/wmrp_tip_pinout.jpg
I have used D-type thermocouple curve for my Weller driver and it seems to give quite accurate temperature. Some people say that it is C-type thermocouple (C and D have quite similar characteristics) but it might also be some nonstandard thermocouple. The heater element is nominally 12V, 40W but according to my measurements it needs only about 9-10 volts to reach 40W power.
+xwarp It`s in the description ^^
Can you post/send/direct me to the schematic for the controller?
+Erik Savoie I'm currently making a version which supports also the WMRT tweezers. I will post the schematics in about 3 weeks time when I have got the boards and verified that it works.
+sidchip excellent, the tweezers would be an excellent addition!
+Erik Savoie Took a bit longer than expected but schematic, layout and FW of the new controller are now available at kair.us/projects/weller/index.html
hello, do you sello this controller?
+MrJsantiagoar This controller is not finished, it is just a prototype which I built using PCB from another project. But I can post a schematic and firmware code if interested.
hello, in this global world compartiéras I'd appreciate your information to enrich knowledge
+sidchip My email is jsantiagoa@hotmail.com
can u build one for me ? i will pay u