How to solder plumbing fittings

Tony gives Brad a run through on how to solder plumbing fittings
Enjoy watching and keep yours eyes peeled for more.
For all your building material and tool needs pop to.
www.tommysyard.com

[@danielott8359]

Loving this channel, you boys rock, can't wait to move into our run down house to start doing it up thanks to your tips and tricks! Keep it coming chaps, I'm addicted!

[@TommysYardchannel]

+Daniel Ott If you would like us to do a how to on anything let us know and dont forget to checkout www.tommysyard.com for all your materials

[@zedman442]

When I was at college we were also taught to flux the pipe not the fitting, my old tutor used to call flux the boiler killer! Good lesson boys!

[@VidzMisc]

brad will be a master if he keeps tagging along with you tony, nice introduction to soldering copper

[@Spiderelectron]

In my city & guilds I was taught that you should never put the flux into the fitting - only onto the tube. Othersie is gets pushed inside the tube, and contaminates the water. Put it onto the tube, and it gets pushed up the tube and only onto the mating surfaces of the fitting, minimising the contamination inside the tube.

[@TommysYardchannel]

+SpiderElectron In my city and guilds it was fitting only and also iev never seen a plumber flux up the tube, there is lots from your city and guilds course that u will never use in site, thanks for letting us know how times have changed

[@Spiderelectron]

+The Champ Yes. Think about where the excess flux goes if you flux the tube rather than the fiittng, and vice versa.

[@joshuasturt4242]

i really miss u 2

[@AdrianNelson1507]

Chaps, do you have a suggestion for a 'beginners' blow torch? Gonna get me some pipes and give this a go ;) thanks for posting

[@macplastering]

Enjoyed the vid guys good info thumbs up and subbed :)

[@a10nmw]

You guys rock

[@brockster4055]

now show him how to silver solder copper pipe which is also a useful skill to have.

[@saberxzero]

Wanna be careful with applying Flux after you've soldered, as he said capillary action, the fitting is still hot and could pull in the flux and then create air bubbles(after the flux burned off) where im from that's what were though. Also we apply more solder, until there a drop. But it's also much more colder during winter so that very much affects how we work(-30c).

[@user-kv4ou4fx5z]

this is good

[@tjaymeredith4328]

to solder it is esay and i am only 12 and i can do that esay