@@AGUNGH sorry I meant resistor ok in the video you welded some wire between one resistor and led light and you replaced the main resistor at the connection side is this all you welded?
Why is everything in English other than you speaking on the video? 🤦🏻♂️ If the video ain't in English write the title n description I. The same language
it has a connector that connects 3rd stop light, can I connect some other led bulb with an additional resistor of 200 Ohm in parallel, so that I can replace the led bulbs and make a new pcb, can you find an electrical diagram Connector have 2 wires, and everything is supplied with that two wires
Браво!
Naah gitu dongg om semangat lagi. Ditunggu-tunggu video terbarunya eh baru muncul.
Gaskeun omkuh
Did you connect the led light directly to the transistor and can you weld any point? Did you replace a transistor? What was the code for it ?
Salaam
There is no transistor but using resistor that direct welded perfectly. In this case, I used 200 Ohm Resistor.
@@AGUNGH sorry I meant resistor ok in the video you welded some wire between one resistor and led light and you replaced the main resistor at the connection side is this all you welded?
I messaged you on Instagram with a short video of the faulty light
@@nargis751 Yes, I did.
@@nargis751 okay let me check on ig.
Guys what SMD diodes are this?
I looking everything but can't find code...
did you find it?
There is smd resistor about 500 ohm.
Why is everything in English other than you speaking on the video? 🤦🏻♂️ If the video ain't in English write the title n description I. The same language
Om..lampu mercy 211 E200 tahun 2003,lampu sebelah kiri selalu mati..apa penyebab-a?
Om dari peugeot 406 yaa
it has a connector that connects 3rd stop light, can I connect some other led bulb with an additional resistor of 200 Ohm in parallel, so that I can replace the led bulbs and make a new pcb, can you find an electrical diagram
Connector have 2 wires, and everything is supplied with that two wires