Overpowered Brushless TAMIYA Neo Fighter Buggy: A Tire Killer!
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- This short video shows you, how to upgrade a TAMIYA NEO Fighter Buggy (DT-03 chassis) with a cheap 80A brushless combo and a 6000mAh hard case 2S Lipo.
Parts links:
- Racerstar 3650 Sensorless Brushless Waterproof Motor 60A ESC For 1/10 Monster Truck Truggy Cars - 3900KV: www.banggood.c...
- Giant Power 7.4V 6000mAh 2S 65C Lipo Battery T Plug Hard Case Pack: www.banggood.c...
- Wltoys 12428/12423 1/12 RC Car Spare Parts 2PCS Left Wheels 0070: www.banggood.c...
- OCSERVO A091 9KG Large Torque Metal Gear Digital Servo for RC Models: www.banggood.c...
- My „Micro RC“ 2.4GHz DIY Arduino remote control system: github.com/The...
Banggood Weekly Coupon Deals: goo.gl/D8B1Mu
Banggood Weekly Discount Deals: goo.gl/uGS7Lf
Some links above are affiliate links. You can support the channel, if you use them. There are no additional costs for you. Thanks, guys!
This Racerstar brushless combo is suitable for most RC cars with 540 can size motor. You can also use it with a3S LiPo and it will be even faster…
My GitHub: github.com/The...
My Thingiverse: www.thingivers...
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Google +: plus.google.co...
If you want to support this channel: / thediyguy999
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
What impresses me the most of the Neo Fighter remains in a level controllable attitude despite torque it was never designed for. That's some good design and engineering from Tamiya.
Yes and i have a 4wd plasma edge 1 on brushless and it spins sometimes
2 years later I stuck this cheap goolrc 3650 in a 25 year old Tamiya Sand Viper on those funky Wltoys wheels. Just drove it for the first time on 3s and the thing just wont stay on the ground😂 Completly mental. That goolrc combo is top notch by the way. Didnt get hot at all. 90 kmh with a car that cost me round about 80 euros to build. Awesome! Servus und abonniert!✌😎
Thank you for the flowers and for subscribing! Grüezi und Tschüss!
niiicccee, i got the same car, same setup, absolutley tears up the ground. i love it.
Thanks. Yes, it's a ripper!
I'm so glad that finally someone else has used brushless systems in a tamiya, I put a 4370kv motor 60AMP esc in my lunchbox with the bigger pinion and it goes at least 35mph, I would suggest buying a lunchbox and using that esc in it.👍
I guess the Lunchbox is a bit too top heavy for me. Also have a look at the 3S running video: th-cam.com/video/mrQsJ8tqFwk/w-d-xo.html
Neo fighters are designed to upgrade to brushless, your lunchbox diff will be fucked in no time, clown town.
Yeah I know that’s why I had to program the esc so it’s not so harsh but if it does at least it was fun whilst it lasts
@@JG-lx5bo I've been running brushless in my van for the last 5 yrs and it's absolutely fun. I run brushless in ALL of my van's and I've got loads of them. They are brilliant fun to use.
Hi guys, I hope you like this crazy brushless conversion. If so, give us a thumbs up and subscribe, because this helps a lot. Thanks!
my brushless 3 wire Powers the Receiver do i have to make a Adapter to Supply white wire to Signal ? and i have the Motor ic and MCU in Cart ready to Order but what the Value of the Caps and Resistors ?
Just plug in the ESC the same way, as you would connect a servo. The values can be found on in the schematic and in the BOM on my GitHub
well i i guess i goofed ended up Over Looking it
I like yours Micro Rc Receiver and I have question about it. Is it possible to use another 8MHz oscilator (original is CSTCC8M00G53-R0)?
Thank you.
Thanks. Most 8 MHz oscillators are OK. Details can be found in the Atmega 328P datasheet.
great video! Thank you very much for the contribution, I have never had a tamiya, I currently have a kyosho axxe 2wd (when I bought it it was already rtr) I have never assembled a chassis from 0 what are the advantages and disadvantages from 0? I am thinking about the DT 03 neofighter, what are the pros and cons of this buggy? Can you fit another servo and variator from other brands? What speeds can we achieve with brushed and a 2s lipo? How about the quality of the spreads and arrows? do you highly recommend brushless on this car? drive shafts wear out fast?
Nice upgrades. I have wltoys 12428. I just want to get little bit extra run time out of stock electronics. Which battery size would be good fit for it ? I am asking you this question bcs I dont want to fry up my esc by random experiment.
Thanks in advance.
Thanks. I'm using this one in the 12428 and in the FY-03: www.banggood.com/ZOP-Power-7_4V-2200mAh-2S-35C-Lipo-Battery-T-Plug-p-992114.html?p=NZ29024828314201605E
TheDIYGuy999 Thanks.
Shehul Suratwala plastic diffs in those wl toys cars will not cope with brushless buddy, I would be surprised if the metal upgrade diffs would last too, you bought a cheap shitter, I got one too just for a laugh, lasted 30 minutes of use before the rear diff completely stripped and that was with a standard motor, spend some real money or the hobby will just not be fun
the shoes! :D
They are cool and about as fast as the car ;-)
Lach, cools änglisch! Erinnert chli a Bundesrat Dingens, "Rire c'est bon pour las Santé" Nicht böse gemeint. Gruess us Kanada. :-)
rock and roll baby !!!! XXXDDDDD
Are you from Switzerland?
Servus, wie lange halten die Reifen nun? ;)
Bei meinem Bürstenmotor halten die originalen Spiked-Tires ja schon kaum. Sehr schnell verschliessen.
Hat die Plastikantriebsritzel den Brushless-Motor standgehalten, oder musste die mittlerweile ersetzt werden?
Plane evtl. auch den Umbau auf Brushless, aber ob's hält? Bin mir da nicht sicher, ob die Plastikteile es lange mitmachen.
Grüezi. Die halten mit einem 3S Akku weniger als eine Akkuladung, abhängig vom "Gasfinger" ;-) Mit den Zahnrädern und Antriebswellen habe ich noch nie Probleme gehabt. Die Zahnräder sind zwar Plastik, aber sehr breit.
@@TheDIYGuy999 autsch :D schade, dass die Reifen so kurz halten. Gibt es da eine gute Alternative, was evtl. wenigstens im Offroad länger hält?
Are you from Swizerland ??
Don’t understand what « calibration » means for esc ?
The receiver signal range needs to be adjusted to the ESC signal range
Cool!
Thanks
How about lower kV brushless motor?
Why? It needs to be fast ;-)
Are you from swirzerlanf
Yes
@@TheDIYGuy999 ich au
Han au äs paar Videos mit rc autos
Jo, dr ARRMA OUTCAST isch nid schlächt, hätt i ou gärn
I'm gonna test a 6s today
Kann man einen NiMh akku für Brushless nutzen?
Besser nicht, da er den erforderlichen Strom kaum liefern kann.
Ach und wie kann ich mit meiner Fernsteuerung den Motor einstellen
👍👍👍👍
Thanks
Top speed?
I never measured, but pretty fast
That car is designed to take lipos it’s a fully upgradable car it’s meant to take a brushless and lipo, why does no one do any research 🤦🏻♂️
Tamiya does not recommend lipos, because they think they are too dangerous. But of course they fit inside, if you choose the correct size. And of course the gears are able to handle the torque, because they are very wide. No issues so far, just pure fun and bald tires
In my experience, the gearbox can not handle anything stronger than the silver can. Transmission case, is made out of hard plastic and eventually will crack and break, especially where the motor mounts, even without major crashes. Chassis is also very brittle and will most likely crack and brake around the front shock tower after a few high speed crashes. Parts are also very expensive.
60a esc.... Ummmmmm
What do you want to tell?
60A aren't much
Kannst du bitte deutsch in den Videos reden!
Können ja, aber die meisten meiner Abonnenten sprechen leider kein deutsch. Hoffe, die Videos gefallen dir trotzdem. Gerne beantworte ich natürlich deutsche Kommentare oder Fragen.
@@TheDIYGuy999 Okay, womit bekommt man die Software in den Regler? Und wie bekommt man den Brushed Kühler da raus?
@@linus9247 Welchen Regler meinst du? Was man im Video sieht, ist meine selbst gebaute, Arduino basierte Fernsteuerung. Die deutsche Anleitung dazu ist hier: github.com/TheDIYGuy999/RC_Transmitter/blob/master/Manual_German.pdf
Natürlich kannst du für diesen Mod auch jede normale 2.4GHz Fernsteuerung verwenden
Was macht man damit dann? Sry. falls die Frage dumm war aber ich bin erst neu in dem Game drin
typisch schwiizer! kein englisch....
Schwenglisch, halt
Uhu
Big mistake putting that set up in there ! Can’t control it , likely to smash it and spend major 💵 on tyres 🛞 let alone the body ! Sports tuned motors are best in my opinion, as you can race instead of bashing the car up 💯