Not to rain on you're parade, but after reconing speakers before I find it very sketchy that you didn't put some paper inside the coils before mounting them to assure totally even space. Then glue them, and I wouldn't have used those old reflex surrounds as it kinda looked like you did. Just leaving a tip for other DIYers that might try this themselves..
восстановление этих колонок как тут видеть можно только для просмотров на ютубе , звук для гаража даже не сгодится плюс ещё и микрофон не лучшый качеством ...Но ! то что я действительно из этого ролика оценил для себя это распиловочный стол - в таком исполнении очень интересном и удобным я ещё не встречал , появилось желание сделать себе такой же
Didn't shim the voice coils in the magnets, and that's REQUIRED to make sure they don't rub. Also didn't see him connect the speaker VC wires to the terminals and pass through the cone. He also didn't cover the terminals before spray painting. Also wonder where he got the new cones (which look nice BTW, good rubber surrounds. Otherwise, nice rework of the woofers. Same issues with the midrange, NO SHIMS. WTF happened to the cross over networks! Also a Rube Goldberg pizo tweeter replacement there.
2 things i have to say about this. While you assembled the subwoofer, you didn't put spacers for good centering, its gonna be an issue (if not now, then the near future, when the materials will have some physical changes, due to movement) , failure rate is slight but possible. 2. thing that at the tweeters, for the leads that is copper wire that functions as the output lead, will gonna break real soon. Aiwa did it in the past, because they made low quality crap speakers, and they wanted the user to buy their products every 1-2year or so. For the second thing im not gonna put sand in your neck but the first thing was really a big issue. The overall quality of the new box compared to the original box is not bad, or its about the same but with maybe a bit better quality of material.(while i talk about the original box, i dont mean the ruined/smashed/broken box, i mean when the speaker came out from the manufacturer.) The one thingy that i almost forgot to mention that the reflex tube is not glued in place, i would have put a little glue, even if its a weaker glue, i would have applied some glue to the reflex tube, its just a little thing that some guys doesn't do, but it helps a bit for sounding, since something actually holds the tube in place, not just the hole.
Thanks for making this video. You do wonderful work. Looks like you had to replace everything but the idea! But now they would look fine in a showroom.
Like some others I was immediately thinking way too much effort to salvage those old e-waste speakers but I don't want to harsh the video's mellow. Those great skills could be used on restoring some classic speakers in the future and we should give him some project ideas! Rogers, Advents? Others?
*_That turned out absolutely gorgeous, dude! A fantastic piece to use for years to come! Please keep up this excellent work and videography! You are doing a fantastic job! 🍻🤘💜_*
For the vinyl, you wrap around the bottom 1/4' and bring the other end all the way around over the 1/4' to the corner and cut square to the edge. They turned out nice
Без центровки катушки в магните? Молодец, жди перекоса при монтаже в вертикальном положении, звук кайф И самое интересное.. а где фильтр? Хотя бы первого порядка на вч. На него прилетает полный диапазон, он сдохнет же
My honest opinion?` You have good skills! But you waste them on garbage like these AIWA-Crap. They are not worth the money for a recone-Kit in the first place. So, I must admit, I just watched someone with amazing skills making Garbage out of shit!. The parts speak for themselves! Not real tweeter, but just a piezo chip... no frequency divider... and the motor of the woofer is also laughable. But you have 105K Visitors! That´s the true value here! I wish you furtherhin best success! Your work, as I said is amazing. I wonder what you could make with good parts and the will to make something high end....👍
Right, this is all for youtube content and "restoring" these turds really doesn't make economic or time investment sense... 3 ways on Ebay like this are like $50 a pair at most.
Красивое кино и не более! Тот, кто хоть раз восстанавливал динамики, знает как правильно центровать катушку и как это важно для динамика. А тут, на глазок всё приклеил, клеем всё залил - и так сойдёт... Одно слово - КЕНО!
Nicely done! If you put the woofer tee nuts on the inside then when you tighten the screws they compress against the wood making a stronger connection.
@@davidhamm5626 I've not had that with MDF but particle board and MDF seem to have a mind of their own at times. It's definitely 'if it works, don't fix it!'
@@davidhamm5626 A lot of the commercial sound cabinets would put a staple across the Tee Nut, probably to help with the spinning problem. (Preferably not so that the screw would hit it)
Merci beaucoup pour votre travail bien fait et très instructif , mais j'ai gardé une interrogation sur un point : est ce qu'il n' y avait pas de filtres dans ces deux baffles car je ne les ai pas vus lors du montage , encore moins lors du démontage ,merci !
В домашних условиях динамик отремонтировать качественно просто невозможно !!! Там нужны специалисты со специальным оборудованием и качественными запчастями !!
Всё здОрово, супер! Нет слов. Но это не реставрация. Это полностью новые колонки. Просто люди своими руками собрали колонки. Максимум, что именно "отреставрировано" - динамики.
All that hard work for those drivers!
Had the same thoughts .
This was really interesting to watch! 👍👍🔊🔊
Not to rain on you're parade, but after reconing speakers before I find it very sketchy that you didn't put some paper inside the coils before mounting them to assure totally even space. Then glue them, and I wouldn't have used those old reflex surrounds as it kinda looked like you did. Just leaving a tip for other DIYers that might try this themselves..
My friend you are a master restorer of speaker drivers beautiful job!!!
Sehr gute Arbeit, die einzelnen Arbeitsschritte wurden auch sehr gut dargelegt. 👍❤️
Exelente amigo mejor no se puede
When it comes to glue, I'm all thumbs. Leaving it for the pros.👍
восстановление этих колонок как тут видеть можно только для просмотров на ютубе , звук для гаража даже не сгодится плюс ещё и микрофон не лучшый качеством ...Но ! то что я действительно из этого ролика оценил для себя это распиловочный стол - в таком исполнении очень интересном и удобным я ещё не встречал , появилось желание сделать себе такой же
При всех затратах, тут только контент для просмотров. Остальное такое себе. Дешевле купить.
Очень красивые колонки получились и звучат качественно.Хорошая реставрация.
Колонки красивые в плане отделки получились звук полное говно
Fabulous job ... you certainly know what you are doing. More please !
Thank you my freind . My Greatings for you from Iraq ❤
I wonder where they get all the generic re cone kits from?
Didn't shim the voice coils in the magnets, and that's REQUIRED to make sure they don't rub. Also didn't see him connect the speaker VC wires to the terminals and pass through the cone. He also didn't cover the terminals before spray painting. Also wonder where he got the new cones (which look nice BTW, good rubber surrounds. Otherwise, nice rework of the woofers.
Same issues with the midrange, NO SHIMS. WTF happened to the cross over networks! Also a Rube Goldberg pizo tweeter replacement there.
с опытом динамики можно центровать вручную, без прокладок.
у нас в россии есть такие мастера.
Entertaining? Yes. Real? I highly doubt it.
@@MrSITSERVICE у вас в расее мастера и клей лют в магнитный зазор? и вместо ВЧ впаивают таблетку? ну то да, согласен - мастера! И все это без филтров.
2 things i have to say about this.
While you assembled the subwoofer, you didn't put spacers for good centering, its gonna be an issue (if not now, then the near future, when the materials will have some physical changes, due to movement) , failure rate is slight but possible.
2. thing that at the tweeters, for the leads that is copper wire that functions as the output lead, will gonna break real soon.
Aiwa did it in the past, because they made low quality crap speakers, and they wanted the user to buy their products every 1-2year or so.
For the second thing im not gonna put sand in your neck but the first thing was really a big issue.
The overall quality of the new box compared to the original box is not bad, or its about the same but with maybe a bit better quality of material.(while i talk about the original box, i dont mean the ruined/smashed/broken box, i mean when the speaker came out from the manufacturer.)
The one thingy that i almost forgot to mention that the reflex tube is not glued in place, i would have put a little glue, even if its a weaker glue, i would have applied some glue to the reflex tube, its just a little thing that some guys doesn't do, but it helps a bit for sounding, since something actually holds the tube in place, not just the hole.
He didn’t show ultimate Trade secrets deliberately, I notice this on other BLogs. It’s deliberate.!
Nice choice of woofer cones.
It is coil which gives good sound😊.. Beautiful
Thanks for making this video. You do wonderful work. Looks like you had to replace everything but the idea! But now they would look fine in a showroom.
Superb work ido also the same job in this field but I don't have mechnery but I did accurate work manually.
Verry verry Good~
Like some others I was immediately thinking way too much effort to salvage those old e-waste speakers but I don't want to harsh the video's mellow. Those great skills could be used on restoring some classic speakers in the future and we should give him some project ideas! Rogers, Advents? Others?
Naprawdę dobra praca , pozdrawiam
Mantep wong serang kota hadir cerdas
God bless you brother
Excelente 👍👏😆restauración!!! Amigo
Nice work!
very fine workmanship
*_That turned out absolutely gorgeous, dude! A fantastic piece to use for years to come! Please keep up this excellent work and videography! You are doing a fantastic job! 🍻🤘💜_*
S sẽ s
They look amazing 👍
Можно сказать не реставрация, а с нуля собрал 👍🔥
great job,
Lindo acabado y bien sonido congratulationes😊
Where did you get the new cones from do you have a link?
26:12 te falto agregarle el cono a los piezo, el cono amplifica mucho mas el agudo que este emite
I agree with you on this. 😂
Is there a crossover ? Or at least high n low pass filters ?
bonita restauracion saludos
Awesome job
Brilliant restoration well done 👍
Well done, nice job 👍😁
the best video
For the vinyl, you wrap around the bottom 1/4' and bring the other end all the way around over the 1/4' to the corner and cut square to the edge. They turned out nice
Какая красота получилась😊 Молодец! Очень понравилась твоя работа❤
Yeah Dude, this is great. You should do more HiFi Stuff.
👍👍👍Amazing skill friend
Awesome
Super 👍👍👍👍
Exelente trabajo
You're the best, follower from 🇲🇽
The best ? Una bestia semmai 🥴 nemmeno i così dei supert tweeter, per nom parlare delle viti storte dei woofer…
@@12al3xio Piccoli dettagli rispetto al suo lavoro di restauro!
Без центровки катушки в магните? Молодец, жди перекоса при монтаже в вертикальном положении, звук кайф
И самое интересное.. а где фильтр? Хотя бы первого порядка на вч. На него прилетает полный диапазон, он сдохнет же
Ему плевать,видос запилил,бабки с просмотров собрал,колонки в помойку=)
Да тут полный пздц. нечего даже докапываться..
Nice job.
При сборке динамиков почему то ни какой центровки не делается, странно.
Потому, что это - полу-бичи с нулевым знанием правил построения акустических систем и динамических головок.
А таким горе-реставраторам накакать с высокой колокольни и на центровку, и на параметры динамиков... Всё-равно ЭТО на продажу пойдёт.
дак ты послушай как звучат,просто помоище)
Great.Respect.🙂👍
Они уже никогда не будут звучать как оригинал после этого))
звучат они крайне посредственно. жаль человека,столько сил,времени и средств потратил.
@@srv4everalone контент запилил ...
Great man 👍👍
ฝฝีทือปรารีตมากสวยงามครับ
Love the restoration. Beautiful work
Excellent
Good job
За работу отлично, за звук 😢
Nice
Nice work
very good
Hi there... So you're using butyl acetate as solvent for the speaker glue.... Just for the german audience... That's Essigsäure-n-butylester 😉
Great work as always
Great job but where is the crossover board?
супер малодцы мужыки сделали на совесть не чем не хуже чем завоцкое ато ищо и лудше...риспект молоцы🇷🇺👍🏻🍫☕🚬
Hay qué nè.
Bonjour quel produit utilisez vous pour décoler les membranes et les spyder
Hello, what product do you use to remove the membranes and spyder?
My honest opinion?` You have good skills! But you waste them on garbage like these AIWA-Crap. They are not worth the money for a recone-Kit in the first place. So, I must admit, I just watched someone with amazing skills making Garbage out of shit!. The parts speak for themselves! Not real tweeter, but just a piezo chip... no frequency divider... and the motor of the woofer is also laughable. But you have 105K Visitors! That´s the true value here! I wish you furtherhin best success! Your work, as I said is amazing. I wonder what you could make with good parts and the will to make something high end....👍
Right, this is all for youtube content and "restoring" these turds really doesn't make economic or time investment sense... 3 ways on Ebay like this are like $50 a pair at most.
Ржавые шурупы в новую фонеру класс👍😂😂😂
Ну так раз всё обновленное, то хотя бы шурупы должны быть "антик"
Красивое кино и не более! Тот, кто хоть раз восстанавливал динамики, знает как правильно центровать катушку и как это важно для динамика. А тут, на глазок всё приклеил, клеем всё залил - и так сойдёт... Одно слово - КЕНО!
ボイスコイルとマグネット間のクリアランスを均一にするために、接着剤を塗布する前に、スペーサーをかませた方が良いでしょう。接着剤が乾いてからスペーサーを取り去り、センターキャップを取り付けるべきです。
saan po eto logar pwede pontahan
បងខ្ញំុចងបានកន្លើត១ក្រាដាស់១ហើយអាត្រនាប់ក្រោម១ អស់ម៉ានបង
Nicely done! If you put the woofer tee nuts on the inside then when you tighten the screws they compress against the wood making a stronger connection.
I have had t-nuts spin, in particle board, and MDF.If I recessed them, and added glues, that seemed to make it better.
@@davidhamm5626 I've not had that with MDF but particle board and MDF seem to have a mind of their own at times. It's definitely 'if it works, don't fix it!'
@@davidhamm5626 A lot of the commercial sound cabinets would put a staple across the Tee Nut, probably to help with the spinning problem. (Preferably not so that the screw would hit it)
Bro what liquid you have used to remove the old glue
What humidity and time do to that fiberboard is brutal.
you put a sealer on it, water or moisture wont penetrate it.
e có đôi loa 1 bên nghe to đập khoẻ hơn bên kia lại bé là bị sao ạ
Is there 300 watt to fit the 8 inch woofer
Merci beaucoup pour votre travail bien fait et très instructif , mais j'ai gardé une interrogation sur un point : est ce qu'il n' y avait pas de filtres dans ces deux baffles car je ne les ai pas vus lors du montage , encore moins lors du démontage ,merci !
Bien echo
tell me what kind of glue you use for speakers
Best...
Me encanta
Độ tỉ mi chưa cao.ló trep thạch anh để lơ lửng k dán màn che lại cho đẹp.sơn luôn con tụ loa và cả thanh gắn mấy cái cọc loa
В домашних условиях динамик отремонтировать качественно просто невозможно !!! Там нужны специалисты со специальным оборудованием и качественными запчастями !!
Why is it that there is no dividing network inside the box? Will it sound good?
Also Link for the coils and spiders and cones for the tweeters???
So about 10% Aiwa speakers. Great job but I do prefer a little higher quality speaker.
Sorry how many dimention box size sir?
Hellow po kuya taga saan kapo magpapagawa sana ako ng speaker sayo
Por arte de majia mantuvo centradas las bobinas ?
Теперь с чистой совестью можно выбрасывать их на помойку)
Super!!!
😘😘👍👍
Всё здОрово, супер! Нет слов. Но это не реставрация. Это полностью новые колонки. Просто люди своими руками собрали колонки. Максимум, что именно "отреставрировано" - динамики.
без центровки катушки, на глаз
Центровки катушки нет , фильтров кроссоверов нет ...
Why don't you wear the orient sk anymore????
I've seen all your videos lately 🧐
Please bring it back 🙏
If you don't want it anymore I'll buy it 😊
Could have bought a pr of speakers for the time and materials in these!
No crossover board?
Que gran trabajo !!!
The supertweeter cone??