FFR 03300-10 is a very important fault to solve as the engine brake is essential for slowing down to reduce wear and tear of the brakes. Good information to hear that bro. First time to see of how to fix the engine brake cable that causes the interruption as the FMI code of 03300 is 10. Remember that red triangle on MAN TGA means service immediately to all truckers, but flashing red triangle means "STOP" and service immediately. This is how critical as I mention in his previous video of "What to do in case of EDC failure and FFR 03277 that no ENGINE CAN is detected as s it is prescribed by the fault book. Appriciate the video sir, you are the most professional M.A.N TGA service man that you fix every truck. Well done and keep up the good work.
Thanks for the great videos , very informative, I'm working on a man tgx 2013 and have an issue with 4156 FMI:4 x17 brake CAN signal wheel 2 . Have replaced the brake modulator on the right side
Thank you for sharing your information. I have a MAN TGX 26.440. It showed a fault code of Malfunction veh. man. computer. It started lose power then later on stopped and its nolonger starting. What could be the problem. Please help
Alternator displ.defective Fault code :ZBR2 03301 -04 I checked this code in fault codes list it meaning Alternator tI.L But I don't know what it means
@@zahidkhan-ym7xu i recommend to check the connection in alternator voltage regalator or a voltage regulator itself.if there is the same trouble in our truck here i will make a video how to repair it.thanks bro.have a nice day
Good day! Advise where to look, error FFR 03010-03 - Limiting torque and speed, I checked (R134), all resistors are intact, what else can you see? Thanks!
@@jlcworkshop Sir, thank you. I checked the wiring, it is intact, I measured the resistance of the sensor, it is within the aisles of the 860 Ohm norm. What else was advised to look at?
Hehehe oo sir kapag may problema ang ebs brakes dito ivlog ko rin.karamihan kc sa mga faultcode ng ebs dito ngayon ay mga ebs sensor lang halos d na rin nga namin nirerepair.
Good morning brother Brother my vehicle MAN TGA it have common rail system its exhaust brake having no power i check exhaust brake flap working properly , in the dashboard there is no code showing ,i change exhaust brake flap also ,adjust tapot of head blocks even then when we engage exhuast brake its only change slitely engine sound but not reducing power of engine ,I inspect clutch plate also
Pozdrav potrebna mi je pomoc oko rikverc svetla u pitanju je man Tga410 .actronik menjac, kada se ubaci u rikverc, ne radi rikverc svetlo i ne pišti. Napon dolazi do releja i kada se prespoji onda svetli. Na zici koja dolazi iz kompjutera, koja treba da upali relej kad se ubaci u rikverc nema napon ni kada se ubaci ni kada je izbacen.
Hello sir,try ti unplug the connection socket in the reverse swich sensor located at the top of gearbox and check the reverse light.maybe there is a live cable wire contacted to the reverse cable wire.
@@jlcworkshop it doesn't have a sensor, reverse light goes through the relay, but relay coil is connected one side to gnd, other side to the computer, from where I should get 24v when it is in reverse gear. Wires of gear selection switch goes into ecu computer and wires goes out from computer to gearbox, and to relay.
Yo me puedo subcribir pero necesito todo los vídeos y repuestas en idioma español y todas las explicaciones de calibrar inyectores y válvulas torqueos d motores e n idioma español ni hablo ni entiendo ingles
First, I wish you a happy year full of success. Please help. Code 003300_06, wire number and color?. The problem is that the engine stops sometimes. Man tga tipper 2007 Thank you from the desert of Algeria
Inst, if you replace vihecle instrument like tachograph,tachometer or zbr with out reprograming,.. INST 02987:Parameter set in combination gauge or chassis number in tachograph not adapted to vehicle.
Sir, I have rebuilt a MAN 440 engine. I bought a new block, crankshaft, and oil pump along with the shells for the crankshaft and cams, but there is a difference in the oil pressure. For example, at the oil temperature at 110, the pressure is 1.0 bar. What is the problem, according to your experience? Thank you.
Hello sir,base on the fault code book,FFR 03269-08 Plausibility message START ENGINE' input request engine start-Fault signal. I did not experience this kind of fault thats why i have no idea about it.
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
FFR 03300-10 is a very important fault to solve as the engine brake is essential for slowing down to reduce wear and tear of the brakes. Good information to hear that bro. First time to see of how to fix the engine brake cable that causes the interruption as the FMI code of 03300 is 10. Remember that red triangle on MAN TGA means service immediately to all truckers, but flashing red triangle means "STOP" and service immediately. This is how critical as I mention in his previous video of "What to do in case of EDC failure and FFR 03277 that no ENGINE CAN is detected as s it is prescribed by the fault book. Appriciate the video sir, you are the most professional M.A.N TGA service man that you fix every truck. Well done and keep up the good work.
Oh my god,wow. thank you very much sir GTA5Gamer 123 i really appreciated your comment.Godbless you bro.
Thanks for the great videos , very informative, I'm working on a man tgx 2013 and have an issue with 4156 FMI:4 x17 brake CAN signal wheel 2 .
Have replaced the brake modulator on the right side
Thanks for sharing your valued experiences
Your welcome sir
Thank you for sharing this video so many will relate this especially the driver & operators.maitenance purposes.
Thanks idol
Wow kapatid nice toturial galore hehe
Hahahahaahha salamat mam jro
So so informative one keep sharing your creativity and your innovative content
Good morning my friend
Tamsak done po watching kabayan
Banat lng ang pag enggols host ...marami kming matutunan sa content mo!
Hahahaha opo mama tess kailangn kc mag enggols kc mas mahirap gumawa ng subtitle
Awesum vid as usual same to you and yr family keep safe.
Thank you
Good job
Bro thanks for the explanation in the video now i can get u right 🙏🙏
Congrats pdi sa channel muh gnda Ang content muh
Hehehehe salamat padi
Awsome thanks for sharing
Ang galing talaga trouble shooter the best
Great
Important information 👌 thanks for this
Thank you, useful person
Good 👍
Thanks for the video brother
Your welcome brother, happy newyear to you
👍💯👍
Thank you for sharing your information. I have a MAN TGX 26.440. It showed a fault code of Malfunction veh. man. computer. It started lose power then later on stopped and its nolonger starting. What could be the problem. Please help
Hello sir,its better to diagnose it with computer for sure
Alternator
displ.defective
Fault code :ZBR2 03301 -04
I checked this code in fault codes list it meaning Alternator tI.L
But I don't know what it means
In fact i also cannot experiece that kind of fault my friend thats why i cannot answer your question.
@@jlcworkshop Thanks for your interest
@@zahidkhan-ym7xu i recommend to check the connection in alternator voltage regalator or a voltage regulator itself.if there is the same trouble in our truck here i will make a video how to repair it.thanks bro.have a nice day
@JLC WORKSHOP regulator and connection is ok also alternator charging Good
I have a problem with the TGS 40,440 unit.....error code 5758-08...what should I do first...thank you
Good day! Advise where to look, error
FFR 03010-03 - Limiting torque and speed, I checked (R134), all resistors are intact, what else can you see? Thanks!
Sir please check the camshaft sensor,and the wire connection also.the wire connection goes to ecu/edc.gray color.
@@jlcworkshop Sir, thank you. I checked the wiring, it is intact, I measured the resistance of the sensor, it is within the aisles of the 860 Ohm norm. What else was advised to look at?
Sorry for my bad English, I am Russian, I use a translator.
Братан как решили проблему с этой ошибкой? @@elektronika-robototexnika
I have a lion city bus A78 it is giving TCO FAILURE FAULT PLS WHAT CAN I DO
Thanks for the responsibility u carry on bro
No problem brother.
Sir about naman sa abs. Hehehe dami ko natutunan sa mga vlog mo.
Hehehe oo sir kapag may problema ang ebs brakes dito ivlog ko rin.karamihan kc sa mga faultcode ng ebs dito ngayon ay mga ebs sensor lang halos d na rin nga namin nirerepair.
Good morning brother
Brother my vehicle MAN TGA it have common rail system its exhaust brake having no power i check exhaust brake flap working properly , in the dashboard there is no code showing ,i change exhaust brake flap also ,adjust tapot of head blocks even then when we engage exhuast brake its only change slitely engine sound but not reducing power of engine ,I inspect clutch plate also
Please share with me your experence about this
Thankyou
Brother what do you mean the exhaust brake having no power?
One of our truck here also same like that problem.there is no fault alarm but engine has no power.the problem is broken exhaust turbo impeller
@@jlcworkshop you mean turbo charger assembly impeller
Pozdrav potrebna mi je pomoc oko rikverc svetla u pitanju je man Tga410 .actronik menjac, kada se ubaci u rikverc, ne radi rikverc svetlo i ne pišti. Napon dolazi do releja i kada se prespoji onda svetli. Na zici koja dolazi iz kompjutera, koja treba da upali relej kad se ubaci u rikverc nema napon ni kada se ubaci ni kada je izbacen.
Hello sir,try ti unplug the connection socket in the reverse swich sensor located at the top of gearbox and check the reverse light.maybe there is a live cable wire contacted to the reverse cable wire.
@@jlcworkshop it doesn't have a sensor, reverse light goes through the relay, but relay coil is connected one side to gnd, other side to the computer, from where I should get 24v when it is in reverse gear. Wires of gear selection switch goes into ecu computer and wires goes out from computer to gearbox, and to relay.
@@GTTwiX ohh sorry it is automatic gearbox?
My truck just crank only, does no spray diesel it shows EDC 00833-02
Edc 0833-02 FUEL RACK POSITION SENSOR.
I request u show me the engine brake mechanism or where power and air pressure is going thanks
Brother the engine exhaust brake mechanism is located under the turbo.
I have a problem with the Tga 18.360
unit....error code EBS 04407..what should I do first..thank you
👍👍
Padi hahahahaha.patsam na enggols padi
@@jlcworkshop matibay😀
Man tga 04353 !
Thank you broo
Welcome sir brother
Man truck in display N no coming pare also gear ⚙️ not working automatic truck
FFR 03302 code coming broder ptosis not working
Hello bro.FFR03302 control unit or cable line.(power take off output stage)check the wire connection brother.
@@jlcworkshopFFR 03302.03 comeing PTO not working this vihical is man outomatic.pto not conted .what can I do brother
Good
Sir can you explain about working and repair of astronic transmission in man trucks if possible
Hello sir,we dont have automatic gearbox here so i cannot make a video about it but please click this link.
th-cam.com/video/Ofa_nHYkmKk/w-d-xo.html
Very good information sir
👍👍👍👌👌👌👌👌🙏🙏🙏🙏😊😊😊😊😊
Yo me puedo subcribir pero necesito todo los vídeos y repuestas en idioma español y todas las explicaciones de calibrar inyectores y válvulas torqueos d motores e n idioma español ni hablo ni entiendo ingles
Esa.es la repuesta todo en español
First, I wish you a happy year full of success. Please help. Code 003300_06, wire number and color?. The problem is that the engine stops sometimes. Man tga tipper 2007 Thank you from the desert of Algeria
Hello sir,how are you.please complete the code details.it is ffr,zbr edc or ebs.please complete the code and i will check tomorow in workshop,thanks
I'm sorry FFR
@@mohmalik6434 this video is for that code ffr 03300.
There was confusion in _06, but the idea arrived. We are proud of your guidance, do not stop
FFR 00647-10
Please check this video sir.thank you.
th-cam.com/video/jmdAZXX4QoI/w-d-xo.html
Sir saan po nakakakuha ng foult code book ng man
Man Trak coming nutul signal up don no stat automatically garbox how air releg
Hello sir,i cannot understand sir.
Man trak, Coming neutral signal up do not start automatically gearbox how air release 😂😂😂
How to rest INST DIAGNOSIS
Inst, if you replace vihecle instrument like tachograph,tachometer or zbr with out reprograming,..
INST 02987:Parameter set in combination gauge or chassis number in tachograph not adapted to vehicle.
Bro what mining
Sust action brake
I dont know bhai.what sust action brake?
Sir, I have rebuilt a MAN 440 engine. I bought a new block, crankshaft, and oil pump along with the shells for the crankshaft and cams, but there is a difference in the oil pressure. For example, at the oil temperature at 110, the pressure is 1.0 bar. What is the problem, according to your experience? Thank you.
Hi sir.1 bar oil pressure is low.atleast 2.0 bar while engine is in idling.and the oil temp is too high.normal oil temp is 70 to 80 degrees celcius
Hello freind i have gta 33.460
And the fault code ffr 0326908 the accelerator is slow to take order from the gear any help tx
Hello sir,base on the fault code book,FFR 03269-08 Plausibility message START ENGINE' input request engine start-Fault signal.
I did not experience this kind of fault thats why i have no idea about it.
Hello sir thank you for response but the start engine i dont have any problem with it alony the accelerator is slow
Better late than nevet
00111-10 viedo
Hi sir,Check the coolant sensor
located at the top of the radiator.thanks
Hi
English n Baga☺️
Hahahaha kailangan eh.mas mahirap kc maggawa subtitle kaya english vlog nlng
Hello. If i have error 03300-05 it is the same thing?
Hello sir,the meaning of -05 is short circuit to earth.(short circuit to ground)
Do you know how many ohms a good fan clutch measure? I get also ffr 00647-05 error and i start think it is the FFR unit. Thank you my friend
04402-10 ???
Ebs 04402 pressure module pressure control on wheel 3
Implausible pressure at end of braking..
Zbr 0442 pump stroke.CENTRAL LUBRICATION SYSTEM
Hai bro how are you
Hello brother
Im good thank you
MY Fon رقمك واتساب بليز
hi sir r u Filipino
Opo
WhatsApp nambar