Just bought one of your magazine molds off Cults. Printing it right now. Looking forward to trying it. If it turns out well, I will be buying more! - Thanks - the vid is awesome also!
@@Shamanholsters Just pressed your mag mold for the Sig P320. So far I am impressed! Question ? You have pre-marked drill patterns for the belt clip - there are 6 holes - too far apart for a Fomi - what clip did you form for?
Great Video! But can you tell me does PETG not melt under the hot kydex? Because googel say PETG melt above 80C (Celsius)? Please correct me if I‘m wrong
Thank you! Sorry for my late reply. No, as you can see in the video. Kydex starts to cool down the moment you get him down from the oven or heat press. When you do a vacuum pressing you immediately cool it with air compressor, same with compression molding, you cool down the ends of the kydex sheet and the cooling starts to spread from the ends. But if you don't help with the air compressor, it would deform a petg mold. Also you need to cool down a mold after molding if you want to make another shell immediately. I also spray it with ptfe to protect a mold a little.
Hi, do you have any tips for printing with petg? I love your designs and already purchased one file from you. I'm just having a really hard time with my petg sticking to my nozzle and ripping itself off the bed when the extruder moves by it.
Hi! Thank you for purchasing my mold. I can help you with PETG. I print my own molds. Sleepless nights with my printer, until I found perfect setup. You can write me on my mail anything you need for 3d printing.
@@ΠάντεληςΔοξάκης Hi, do you mean the name of filament for 3d printer? I use brand “Devil Design” PETG, it is the cheapest here in Serbia, but works great. But never use transparent PETG
@@Shamanholsters Thank you about that, but no , I was wondering what is the fabric that you use and also where I could find it if you have spotted a logical priced source. Thank you very much. By the way , you have done a great job
@@ΠάντεληςΔοξάκης sorry, you meant on molds? I design them. You can buy them on this link cults3d.com/en/creations/mine , or directly from me. My email is shamanholsters@gmail.com
I use some cheap PTFE spray and as soon as I press the Kydex, I use air compressor to blow the kydex. =Zero deformations. You can still see layer lines on the printed mold, even after 20 shells.
@@Shamanholsters did you try them in abs? Abs for us is very simple cause we use a bambulab xc1. Most of our molds are from nylon. But as I mention, it is a pain in the a$$ fighting with moisture. So if we can gateway with petg or abs is a win win.
@@JoseAguiloworkshops No, I spend a tons of PETG and time to tune my Ender 3v2 to print PETG perfect and I don’t have much of the choice in my country to buy filaments. Only pain for me is only print time, but I’ll try to reduce print time with 0.8 nozzle, before I buy k1 max.
@@Lsd5688 Hi. One side is approximately 250g of PETG filaments with slicer settings that I use. 20% gyroid infill, 5 lines bottom, 10 and more layers on the top.
I use 20% of gyroid pattern, but if you want to use other pattern you need to increase percentage. Point is for the cells of the pattern to be small so they can hold top layers.
I see you bought my Glock duty mold design. Thank you very much! If you are not in the hurry I made some improvements on the molds. I can send you new mold on mail or you can wait to download it on cults. You already paid for it.
Amazing, absolutely amazing.
Just bought one of your magazine molds off Cults. Printing it right now. Looking forward to trying it. If it turns out well, I will be buying more! - Thanks - the vid is awesome also!
Thanx, if you have any questions, modifications, or anything else, feel free to contact me any time.
@@Shamanholsters Just pressed your mag mold for the Sig P320. So far I am impressed! Question ? You have pre-marked drill patterns for the belt clip - there are 6 holes - too far apart for a Fomi - what clip did you form for?
@@PHXholsters Thank you! Holes are for tek-lok.
@@Shamanholsters Is that the knife version or the holster version? Knife version is more narrow. BTW - I am a German Shepherd man myself.
well done dude! i use one time blue tape to avoid the 3d printer line marks...works great, holster is smooth. regards
Thank you!
Great Video! But can you tell me does PETG not melt under the hot kydex? Because googel say PETG melt above 80C (Celsius)? Please correct me if I‘m wrong
Thank you! Sorry for my late reply. No, as you can see in the video. Kydex starts to cool down the moment you get him down from the oven or heat press. When you do a vacuum pressing you immediately cool it with air compressor, same with compression molding, you cool down the ends of the kydex sheet and the cooling starts to spread from the ends. But if you don't help with the air compressor, it would deform a petg mold. Also you need to cool down a mold after molding if you want to make another shell immediately. I also spray it with ptfe to protect a mold a little.
Hi, do you have any tips for printing with petg? I love your designs and already purchased one file from you. I'm just having a really hard time with my petg sticking to my nozzle and ripping itself off the bed when the extruder moves by it.
Hi! Thank you for purchasing my mold. I can help you with PETG. I print my own molds. Sleepless nights with my printer, until I found perfect setup. You can write me on my mail anything you need for 3d printing.
shamanholsters@gmail.com
what his that heater you use to bend it. Where can I buy of learn to make that?
Hi. It's the simple quartz heater. I just made some modification.
Look very good. How can i order a holster from u ?
Bozidare, I already made you a holster. I know you are a gun addict, but you are also a holster addict.
@@Shamanholsters aaahhhh...u recognized me 😁🤣. Well...one can never get to many good gun stuff 🤣🤣
Just don't tell my wife 🤣🤣🤣🙂
What kind of lune are you spraying on the molds?
@@scottyjordan9023 I'm spraying with some cheap PTFE dry lubricant.
What is the name and quality that you use in order to make the case and where can I find it from ? Thank you
@@ΠάντεληςΔοξάκης Hi, do you mean the name of filament for 3d printer? I use brand “Devil Design” PETG, it is the cheapest here in Serbia, but works great. But never use transparent PETG
@@Shamanholsters
Thank you about that, but no , I was wondering what is the fabric that you use and also where I could find it if you have spotted a logical priced source. Thank you very much.
By the way , you have done a great job
@@ΠάντεληςΔοξάκης sorry, you meant on molds? I design them. You can buy them on this link cults3d.com/en/creations/mine , or directly from me. My email is shamanholsters@gmail.com
@@ΠάντεληςΔοξάκης thank you very much!
nice molds dude. am looking to get a few. will you be expanding your mold lineup soon?
Sorry I couldn't reply to you earlier. I'm working on molds constantly but not uploading it yet. What model do you need?
was is your workflow for designing this? do you start off with a 3d model of the pistol? how come the petg doesnt melt?
PETG has an extremely high temperature rating
What material you use for print your molds ?
Some cheap PETG
What printer do you use
@@CrazyCooter82 I still use modified ender 3 V2 and I'm waiting for K2 that I pre-ordered 6 months ago 😀
@ where do you find the files for the molds or did you do it yourself
@CrazyCooter82 I design them cults3d.com/en/creations/mine
Can I order holsters from you?
Off course, write me on mail shamanholsters@gmail.com
How do you avoid mold deformation with petg? Even abs deform with very hot kydex. I have lucky with nylon, but it's a pain to print.
I use some cheap PTFE spray and as soon as I press the Kydex, I use air compressor to blow the kydex. =Zero deformations. You can still see layer lines on the printed mold, even after 20 shells.
I do my own pressure molds, but I will buy one from you cause you help me here! Thanks
@@JoseAguiloworkshops No need to, I’m glad I can help!
@@Shamanholsters did you try them in abs? Abs for us is very simple cause we use a bambulab xc1. Most of our molds are from nylon. But as I mention, it is a pain in the a$$ fighting with moisture. So if we can gateway with petg or abs is a win win.
@@JoseAguiloworkshops No, I spend a tons of PETG and time to tune my Ender 3v2 to print PETG perfect and I don’t have much of the choice in my country to buy filaments. Only pain for me is only print time, but I’ll try to reduce print time with 0.8 nozzle, before I buy k1 max.
Do you sell the cad files ?
Hi. What model are you interested in?You can contact me on shamanholsters@gmail.com
What printer do you guys recommend for making these molds
I use ender 3 v2 with all metal hotend. Any printer that can print PETG would do.
How many rolls of filament did you use to make both molds
I just got a 3d printer and planing to buy some of your files I was just wondering if it take a lot of filament to make one
@@Lsd5688 Hi. One side is approximately 250g of PETG filaments with slicer settings that I use. 20% gyroid infill, 5 lines bottom, 10 and more layers on the top.
可以购买你的打印文件吗
Really good ideas! Are you going to add your contact info to your channel page, so we can reach out to you.
Thank you! I’m not very good with social networks :). My contact mail is shamanholsters@gmail.com
Very good. FYI, You can also list it on your channel's home page. That way others can find you easily.@@Shamanholsters
Thank you, I appreciate it. I got to find some time to play with youtube, instagram, etc. I did not post a lot of my projects.@@grappler185
@@Shamanholsters What state are you in?
@@grappler185 Serbia
What percentage of infill are you using for that mold in your printer settings?
I use 20% of gyroid pattern, but if you want to use other pattern you need to increase percentage. Point is for the cells of the pattern to be small so they can hold top layers.
I see you bought my Glock duty mold design. Thank you very much! If you are not in the hurry I made some improvements on the molds. I can send you new mold on mail or you can wait to download it on cults. You already paid for it.
@@Shamanholsters Yep I did. I bought the Beretta compression mold too. That is going to help me out so much. Thanks!
@@corwins_pattern_ghost Thank you, just send me your mail and I will send you new G17 mold.
@@Shamanholsters Just sent you an email.