Thank you. Love the content and your sponsored videos. You're a professional home owner and I respect your choices and products you use and test. PS. I almost bought a Harbor Frieght winch! Love the WARN. When's the WARN Stump vid?? 🤣👍👍
Where this could useful is if you need to conform to certain uniform standards and the holster needs to be a certain color for example security contractors and military. Also, you could use the excess material to wrap other pouches, etc.
Why not align the edges of the wrap with the open edge of the holster, leaving a bit of overhang, and then trim it off like the rest when you go around with the razor? Then you wouldn't have a seam at all. Regarding the ads, I prefer the sponsor spots over the random and annoying YT ads. Interesting idea. Not something I'm likely to do to my holster, but interesting to see how it's done.
Agreed on all points. That said, you could design a bunch of holsters to match the fabric of your pants so that they blended in to that fabric as a form of social-camouflage.
it is as you said. i would keep the few inches of overhang and glue them on the inside just past the screw holes. then when the glue starts to fail at the edges, the screws hold it from slowly unwinding completely.
I was going nuts watching him center the fabric on the side of the holster, instead of lining the edge of the fabric up to wrap around the holster. They made the holster with a single piece of Kydex, so why not do the same with the wrap. Ugggggh.
I've used clear nail polish around the edges, too. Seems to work real well. Used it on my dirtbike's graphics edges, as well. Keeps those edges down real well. The sponsored ads you do are fine because of our common interests and we know the ones you chose are ones you use ! Glad to see you're feeling better. Prayers
Glad to see you back! You don't realize how much you look forward to these videos until you aren't getting them everyday. Big fan of Trex arms as well!
Instantly recognized Rekieta's stream in the background as I have had my computer set up with it on in the background each day throughout the trial. By far the best coverage of the trial anywhere.
Best Channel Ever! I love your videos and when I needed to learn how to wrap holster - I found it here too! So much great information even for old school survivor like me! There’s always something new to learn every day!
Part of the benefit of wrapping a holster in this type of material is it cuts down on reflectivity since kydex can be kinda shiny. And noise reduction from a branch or something similar, instead of plastic is on cloth. I think both are minimal, but every bit counts sometimes. I prefer ads from content creators as opposed to the ones from TH-cam.
I am very glad you recover more and more. You are you looking much better than in the last videos! Hope your daughter is fine as well. The ads you put in the videos are fine as I know they are important for your living and the contant I enjoy.
The closet pole trick is genius! And warming the glue first is definitely important. If the 77 glue is cold it won’t set and sprays out very clumpy/ bubbly. As far as the advertising on your channel, the more you can control the content the better!
I like your ad change. You are correct about some of the TH-cam ads not being in agreement with what I know to be your values, as well as many of ours. Thanks!
great diy project. quick question, why even have a seam in the back? I think you can just wrap from end to end just like the sheet of kydex was folded and cut. not sure if i'm explaining that correctly :). glad you are feeling better.
Was thinking the same thing. Since a kydex holster is basically a taco for your pistol, after the hardware is removed, you could just form another taco with the fabric and put the holster inside of it; and then cut the edges after the fabric has been fitted.
The reason I opened comments was to say this. Maybe there's a professional home owner reason... It does look great though. Not that I have a holster. Or a firearm.
I don't OWN a gun (UK) and never will but I just love watching this guy. He seems to have ALL the toys and ALL the hobbies. I'm sure not ALL Americans have this much stuff in their lives but most you tubers seem to have tons of stuff. Boats, SUV's, Jet Skis, guns, tents, stoves, rods and reels, chain saws, welding gear, pressure cookers, mason jars, etc. etc. etc. I should move!
I laughed when I read your comment Chris. I agree with so much of what you say. I also live in the UK, in the suburbs (like so many of us) and I prioritise space in my home over STUFF. But I still love watching others using the stuff I used to drool over owning. I have so much stuff, I can’t get enough space in my tiny workshop / storage spaces to use it properly 😂🤣. So I will go on giving my stuff away to friends until I can do what I really prioritise. Whatever that ends up being. Tough choices!
@@mrbluesky9891 it’s a very polarised society. Some do. Some are living in inescapable grinding poverty. Many are in suburbs like me. But I don’t suppose we watch the TH-cam channels from cramped suburbia as much as the ones from those with spacious workshops or acres of land! Because it is such a breath of fresh air. Plus there is the complication of the different affects of poor health and wealth. But we’d better not go there. Not much inflames our American friends more than a discussion on healthcare!
Glad to have you back!!! I like the sponsored ads better then the TH-cam ads like you mentioned! Some Tubers that I follow do both and its annoying. Stay safe!
Cody, I'm so glad to see you've bounced back. I hope your family is doing better as well. However you choose to monetize, we're just happy for the content.
The TH-cam ads are terrible. But the Simply Safe ads aren't bad at all. Just wanted to give you my opinion my friend. God bless you, Mrs W, Jack, and sweet loaf. Thanks for another great video. I had no idea I could even do that myself. I thought those where premade. Anyhow thanks again.
I would much rather see the ads that you record yourself, instead of the random TH-cam ads. At the end of the day, you deserve to make a buck or three off of these videos. You put a lot of work into them, and you're sharing some great knowledge. I trust that you won't advertise anything that you don't believe in, because you're too good for that. Keep it up, Cody.
Looks good. Curious why you didn't simply align the seam with the kydex seam. Regarding ads, you do what you need to do, brother. Many of us use ad blockers, acquiring sponsors would be the better way to get ad revenue and not having to share it with a company that hates us is a bonus.
I noticed you were watching the Rekieta Law Rittenhouse Trial Livestream, I've been glued to that for the past few days, so glad and releived with the verdict that came in, praise the Lord! Also really glad that you're back in good health and uploading regularly!
My 2 Cents is if you can get Sponsors you believe in, GO FOR IT. This is your job and we support you. Also, anyone else get the "Mr Rogers" or "Bob Ross" feel when he explains what he's doing in the video? I definitely like it and he's gotten really good at it over the years. Keep up the Great Work!
Really enjoying the members only video releases. I personally don't support you specifically for access early but it's certainly makes me feel valued. Hope your feeling stronger each day and do not worry about the ad sponsors those of us who support the channel know you need to do what you can to stay away from the youtube ads.
Looks awesome Cody, next time I would recommend just wrapping the whole holster leaving both edges overhanging on the open side of the holster, (where the retention is) that way you will have no seam on the holster at all. Awesome video, I will be doing this to some of my stuff in the future.
Thank you for this! I was searching for a good how-to article or video on exactly this. When I saw that this was by Wranglerstar, I knew I would not be disappointed. Very clear and helpful. Proho doesn't disappoint. Act accordingly
Awesome Job Brother!! Of course we all have our own way of doing things! At about 5:00 you spray the holster on the post away from the material. I would (and will) spray it over the material. The extra couldn't hurt! As far as ads I have NEVER had a video on your channel interrupted by an ad. My preferred browser has various ad blockers. If everyone would do their homework they also could watch you uninterrupted as well. It's really useful when you are sharing The Word. No one needs an ad in the middle of that to distract from your shared message. I don't mind your personal "ads" at all. I regard them as testimonials!
What a great way to personalize your holster on the cheap. You can make it completely your own style. I also don’t mind when you insert your own ads in the midst of the videos.
why did you create the scenario of having to cut a seam? you already had a seam in the back. Press the bent side in the middle of the fabric then just press it all in. once you have full coverage cut around the edges to clean it up then punch holes. then reassemble
Love the "Free Kyle" message. I find it interesting that Kenosha told local Police to stand down during the event when the incident occurred, but they are calling out state guard and extra police for the aftermath of the verdict. Glad to hear you are doing better.
Cody I don't usually comment but I will today I'm glad you are doing better. Hope u and your family make a full recovery you are in our prayers god bless.
If anyone is looking for a gun belt that wont break the bank, AXL Eclipse Belt is new getting great reviews. Just ordered myself one. Thanks for this I am going to wrap a couple of my holsters
Great to have you back Cody! 3 Video in 3 days! back with a bang! I also don't mind sponsored videos! As mentioned above the sponsors you choose to work with are of interest to us 😁 keep up the awesome work!
Been using the 3M spray adhesive for years, you really want something to stay on forever spray it on both pieces your gluing together, works awesome on boat carpeting, two boats done,and still holding, hope you are feeling better,as well the sweet loaf,and as always prayers
Thanks for pointing that out I missed it ! Self defense and the AR are really what they want ! Kyle is just a pawn unfortunately. Hopefully there are a few jurors with backbones in that room.
I prefer the sponsorship vs TH-cam ads. I just wish I would have found out about the SimpliSafe wireless cams before I went with another company 🤦🏻♂️ Thanks as always sir.
Nothing beats G-code's Tactical Fuzz. I don't know how they bond that stuff to the Kydex, but it's perfect after the better part of a decade of daily use. Absolutely no peeling or delamination. Incredible.
No idea what your channel is about but watched this video and loved the care with which you executed the project. I have a similar going slow but precise mentality and that isn’t seen very often. It always makes for a better end result 👌🏻 Subbed!
If the holster effectively has a seam on the back edge, why wrap the cloth all the way around and have a cloth seam on the back side? why not just follow the same seam for both? Either way, this is an awesome wrap... I like that a LOT more than getting a camo print kydex. I would think it would make it a little quieter, and less "shiny" or reflective. I also really like that holster system.. I hate having the holster threaded in the belt, and then you need to take the pistol off, but the only way to do that is unholstering the pistol.. I like keeping the holder on the pistol like that. Also, for the ads.... just FYI, my ads for this video were for Carter's children's pajamas.. Last thing.... the YT channel Donut Media also does in-video ads, however, they also add a little yellow progress bar across the bottom of the frame while in the ad part of the video... I thought that was kind of clever.
I never thought you would teach me about holsters. Boy was i wrong. I make leather and kydex holsters. Iv never thought about doing the wrap after the molding.
My brother has a home based holster making business in Vancouver. Hit me up with your specs and I'll get you one custom made. Glad to see you doing well brother!
+1 for sponsored videos. I feel this is a trend that TH-cam will adapt to in the near future but am all for getting more of the advertising $'s in you pocket. Well wishes to you and yours.
Thank you. I was gling to paint mine . Then I remembered I painted a plastic motorcycle helmet years ago. 10 days later the chemicals in the plastic started breathing through the paint causing it to Crack. So I found you and said ( that's it right there. That's what I'm going to do ).
Couldn't help but notice the Rekieta Law Rittenhouse Trial Live stream on your laptop. Ha, Love it! Been glued to it myself. Thank you for the great content Cody! Glad you're feeling better.
Wranglerstar's Video Supplies:
MultiCam fabric - amzn.to/3cjbQ3N
3M adhesive - amzn.to/3nmYdqD
Isopropyl alcohol - amzn.to/3wR6kyM
Razor blades - amzn.to/3CsF0bf
(amazon affiliate links)
Thank you. Love the content and your sponsored videos. You're a professional home owner and I respect your choices and products you use and test.
PS. I almost bought a Harbor Frieght winch! Love the WARN.
When's the WARN Stump vid?? 🤣👍👍
Hey Cody you forgot to post the holsters...
Where this could useful is if you need to conform to certain uniform standards and the holster needs to be a certain color for example security contractors and military. Also, you could use the excess material to wrap other pouches, etc.
Please link to the manufacturer. I and many others will not use amazon, it's rarely the best price available anyways. Support real businesses.
Do you have an updated link for the fabric? Link to Amazon doesn't seem to be working.
Cody I can’t express enough how glad I am that you are back and healthy. Still praying for your family.
@@77Matt true but nonetheless still good to see new content.
I’m glad you are feeling better.
@@seanwillingham3755 is Cody ill? Is he ok?,...what's going on,...haven't been here I'm a bit,....
@@77Matt is he sick again?? Is Cody ok???
@@bodymanruss518 he had Covid pretty bad.
Wranglerstar, count my vote in the “sponsored videos are OK with me” column. You are right… your sponsored ads generally reflect our common interests.
Thank you for the feedback.
Agreed sponsored videos have all been common interests. They also are needed to help pay the bills. One cannot live on TH-cam view revenue alone.
Here here
👍👍
Heavy D sparks sponsored adds are like mini movie productions. It just works.
Why not align the edges of the wrap with the open edge of the holster, leaving a bit of overhang, and then trim it off like the rest when you go around with the razor? Then you wouldn't have a seam at all.
Regarding the ads, I prefer the sponsor spots over the random and annoying YT ads.
Interesting idea. Not something I'm likely to do to my holster, but interesting to see how it's done.
I was coming to say the same thing, but you beat me to it sir.
Agreed on all points.
That said, you could design a bunch of holsters to match the fabric of your pants so that they blended in to that fabric as a form of social-camouflage.
it is as you said. i would keep the few inches of overhang and glue them on the inside just past the screw holes. then when the glue starts to fail at the edges, the screws hold it from slowly unwinding completely.
I was going nuts watching him center the fabric on the side of the holster, instead of lining the edge of the fabric up to wrap around the holster. They made the holster with a single piece of Kydex, so why not do the same with the wrap. Ugggggh.
Yep, it isn't a cylinder... it has an open edge.
I love the edge of your work platform says "free Kyle". Thank you for this subtle support brother. God bless you and your family.
I've used clear nail polish around the edges, too. Seems to work real well. Used it on my dirtbike's graphics edges, as well. Keeps those edges down real well.
The sponsored ads you do are fine because of our common interests and we know the ones you chose are ones you use !
Glad to see you're feeling better.
Prayers
Great tip,
Looked up how to wrap a holster and stoked to see it was YOU that made a video. Im from Portland and you are someone I like and respect. Thanks
I think elimination of reflection is the main perk of wrapping the holster in fabric. This was super awesome. Glad to see you upright and active.
Feels better on skin imo. Kydex sticks sometimes when I sweat.
Glad to see you back! You don't realize how much you look forward to these videos until you aren't getting them everyday. Big fan of Trex arms as well!
This is the type of content that brought me to this channel many years ago, the ads don’t bother me!
Instantly recognized Rekieta's stream in the background as I have had my computer set up with it on in the background each day throughout the trial. By far the best coverage of the trial anywhere.
Best Channel Ever! I love your videos and when I needed to learn how to wrap holster - I found it here too! So much great information even for old school survivor like me! There’s always something new to learn every day!
Part of the benefit of wrapping a holster in this type of material is it cuts down on reflectivity since kydex can be kinda shiny. And noise reduction from a branch or something similar, instead of plastic is on cloth. I think both are minimal, but every bit counts sometimes.
I prefer ads from content creators as opposed to the ones from TH-cam.
I am very glad you recover more and more. You are you looking much better than in the last videos! Hope your daughter is fine as well.
The ads you put in the videos are fine as I know they are important for your living and the contant I enjoy.
The closet pole trick is genius! And warming the glue first is definitely important. If the 77 glue is cold it won’t set and sprays out very clumpy/ bubbly. As far as the advertising on your channel, the more you can control the content the better!
Glad you're well and you run whatever ads you want!
Love you brother!
You're sounding better and better with each new video. Glad to see you're bouncing back from your illness so well.
lmao at the Rittenhouse trial stream in the background, I've been glued to it as well.
look at the piece of plywoods Edge there's an Easter egg
@@TroyFronczek the majority of sheople would of missed that. 👍
I like your ad change. You are correct about some of the TH-cam ads not being in agreement with what I know to be your values, as well as many of ours. Thanks!
great diy project. quick question, why even have a seam in the back? I think you can just wrap from end to end just like the sheet of kydex was folded and cut. not sure if i'm explaining that correctly :). glad you are feeling better.
Was thinking the same thing. Since a kydex holster is basically a taco for your pistol, after the hardware is removed, you could just form another taco with the fabric and put the holster inside of it; and then cut the edges after the fabric has been fitted.
The reason I opened comments was to say this. Maybe there's a professional home owner reason... It does look great though. Not that I have a holster. Or a firearm.
@@MountainKing408 exactly, a taco within a taco. no seam. glad i made at least some sense it was hard to explain. now i want tacos.
@@allencevans as a professional home owner myself i would have wrapped the firearm then wondered why it no longer fit in the holster lololol.
I don't OWN a gun (UK) and never will but I just love watching this guy. He seems to have ALL the toys and ALL the hobbies. I'm sure not ALL Americans have this much stuff in their lives but most you tubers seem to have tons of stuff. Boats, SUV's, Jet Skis, guns, tents, stoves, rods and reels, chain saws, welding gear, pressure cookers, mason jars, etc. etc. etc. I should move!
I laughed when I read your comment Chris. I agree with so much of what you say. I also live in the UK, in the suburbs (like so many of us) and I prioritise space in my home over STUFF. But I still love watching others using the stuff I used to drool over owning. I have so much stuff, I can’t get enough space in my tiny workshop / storage spaces to use it properly 😂🤣. So I will go on giving my stuff away to friends until I can do what I really prioritise. Whatever that ends up being. Tough choices!
@@nigelwylie01 Thanks Nigel, I guess the Americans have more money than us?
@@mrbluesky9891 it’s a very polarised society. Some do. Some are living in inescapable grinding poverty. Many are in suburbs like me. But I don’t suppose we watch the TH-cam channels from cramped suburbia as much as the ones from those with spacious workshops or acres of land! Because it is such a breath of fresh air. Plus there is the complication of the different affects of poor health and wealth. But we’d better not go there. Not much inflames our American friends more than a discussion on healthcare!
Hey, I moved to the US from the UK, proud citizen for 15 years. Best decision I ever made
Glad to have you back!!! I like the sponsored ads better then the TH-cam ads like you mentioned! Some Tubers that I follow do both and its annoying. Stay safe!
It's so good to hear you daily again. Your voice and reason has become a staple in my life. God bless.
Cody, I'm so glad to see you've bounced back. I hope your family is doing better as well. However you choose to monetize, we're just happy for the content.
Coming from the UK i must say i love the content, and i appreciate your effort to avoid the chore of ads
Rekieta law is doing an excellent job, I have had them playing in the background as well.
You sound much much better. Good to hear!! Best to everyone
Thank you for doing your own ad in the middle versus several TH-cam ads throughout the video. 👏
The TH-cam ads are terrible. But the Simply Safe ads aren't bad at all. Just wanted to give you my opinion my friend. God bless you, Mrs W, Jack, and sweet loaf. Thanks for another great video. I had no idea I could even do that myself. I thought those where premade. Anyhow thanks again.
I would much rather see the ads that you record yourself, instead of the random TH-cam ads. At the end of the day, you deserve to make a buck or three off of these videos. You put a lot of work into them, and you're sharing some great knowledge. I trust that you won't advertise anything that you don't believe in, because you're too good for that. Keep it up, Cody.
Looks good. Curious why you didn't simply align the seam with the kydex seam.
Regarding ads, you do what you need to do, brother.
Many of us use ad blockers, acquiring sponsors would be the better way to get ad revenue and not having to share it with a company that hates us is a bonus.
Your sponsorships are always on brand and thoughtful, i not only don’t mind them, I actually watch all of the ad segments and enjoy them
I like the “Free Kyle” message! Thanks for the how-to!
Also, what is that on your sharpie?
I noticed you were watching the Rekieta Law Rittenhouse Trial Livestream, I've been glued to that for the past few days, so glad and releived with the verdict that came in, praise the Lord! Also really glad that you're back in good health and uploading regularly!
You just saved a whole bunch of people a whole bunch of money. Thank you
I wholeheartedly agree with you about sponsorship and advertising. They had Hilary ads showing on your channel back in 2016.
My 2 Cents is if you can get Sponsors you believe in, GO FOR IT. This is your job and we support you.
Also, anyone else get the "Mr Rogers" or "Bob Ross" feel when he explains what he's doing in the video? I definitely like it and he's gotten really good at it over the years. Keep up the Great Work!
Support yourself and your family how ever you can! People that have been with you for a long time understand and will always stand by you!!
Really enjoying the members only video releases. I personally don't support you specifically for access early but it's certainly makes me feel valued. Hope your feeling stronger each day and do not worry about the ad sponsors those of us who support the channel know you need to do what you can to stay away from the youtube ads.
Sponsored Ads are better than random.
Great to see you up and feeling better. Hope the wife and kids are doing well.
Looks awesome Cody, next time I would recommend just wrapping the whole holster leaving both edges overhanging on the open side of the holster, (where the retention is) that way you will have no seam on the holster at all. Awesome video, I will be doing this to some of my stuff in the future.
Thank you for this! I was searching for a good how-to article or video on exactly this. When I saw that this was by Wranglerstar, I knew I would not be disappointed. Very clear and helpful. Proho doesn't disappoint. Act accordingly
You can't be a homeowner without arts and crafts, and you can't be a professional without sponsors. Always enjoy your videos.
The ads don't bother me. I scroll to the end of the video, then hit the replay button and no ads for the whole video. Works every time.
I really appreciate you uploading a lot of videos after a break, that means you care about us- your fans! Cheers!
Came here for the holster wrapping video.. stayed to drool over that beautiful Wilton vise!! 😍🤤🤣
I’ve never thought doing of this but after seeing how easy this really is I think I’m going to give it a shot
God bless ya Mr. W! So glad to see ya back to health and continuing with the videos.
I also liked the little message written on the plywood.
Awesome Job Brother!! Of course we all have our own way of doing things! At about 5:00 you spray the holster on the post away from the material. I would (and will) spray it over the material. The extra couldn't hurt! As far as ads I have NEVER had a video on your channel interrupted by an ad. My preferred browser has various ad blockers. If everyone would do their homework they also could watch you uninterrupted as well. It's really useful when you are sharing The Word. No one needs an ad in the middle of that to distract from your shared message. I don't mind your personal "ads" at all. I regard them as testimonials!
When it comes to contact adhesives, extra is almost always worse. I
What a great way to personalize your holster on the cheap. You can make it completely your own style. I also don’t mind when you insert your own ads in the midst of the videos.
why did you create the scenario of having to cut a seam? you already had a seam in the back. Press the bent side in the middle of the fabric then just press it all in. once you have full coverage cut around the edges to clean it up then punch holes. then reassemble
Exactly what I was thinking... Feels like an extra step for nothing.
@@nlynch55 I think he got the info from an east coast guy
Love the free Kyle easter egg on the plywood. My prayers are with you cody! Godbless!!!!!!!
Wrapping reduces heat signature. Also protects the holster from the elements. Great video! Thanks for posting!
Love how you’re watching Rekieta Law on the background on the tablet haha
The holsters came out awesome. Thanks for sharing!
Love the "Free Kyle" message. I find it interesting that Kenosha told local Police to stand down during the event when the incident occurred, but they are calling out state guard and extra police for the aftermath of the verdict.
Glad to hear you are doing better.
Really like the short but cool/fun “arts and crafts” as you say projects. Would love more of them
Cody I don't usually comment but I will today I'm glad you are doing better. Hope u and your family make a full recovery you are in our prayers god bless.
Glad you're feeling better after Covid! It's great to have you back!
If anyone is looking for a gun belt that wont break the bank, AXL Eclipse Belt is new getting great reviews. Just ordered myself one. Thanks for this I am going to wrap a couple of my holsters
Great to have you back Cody! 3 Video in 3 days! back with a bang! I also don't mind sponsored videos! As mentioned above the sponsors you choose to work with are of interest to us 😁 keep up the awesome work!
I 100% prefer ads you create and control. You’re doing a great job! I hope you’re feeling better too.
Been using the 3M spray adhesive for years, you really want something to stay on forever spray it on both pieces your gluing together, works awesome on boat carpeting, two boats done,and still holding, hope you are feeling better,as well the sweet loaf,and as always prayers
Welcome back Cody glad your getting better !
Loving the sneaky 'Free Kyle' message at 3.50 😂
Thanks for pointing that out I missed it ! Self defense and the AR are really what they want ! Kyle is just a pawn unfortunately. Hopefully there are a few jurors with backbones in that room.
I prefer the sponsorship vs TH-cam ads. I just wish I would have found out about the SimpliSafe wireless cams before I went with another company 🤦🏻♂️
Thanks as always sir.
Ads for companyes chosen by you are better than the ones from yt... keep going strong 💪
Looks great!! Always appreciate DIY videos like this. Thanks
Definitely going to do that to my 7360! Thank you for sharing this DIY! God bless!
Awesome build... just happen to be in the middle of a kydex build right now... thanks.
You always got me buying a new item for the shop. Great glue recommendations!
I used my forming press to stick the fabric to the kydex and it worked really well.
I love this video. I am SOOO happy to have you back. Keep sharing your advertising as it takes care of you AND shares good products with us!!!
Love that you are keeping an eye on Kenosha. We watch the same stream.
I love the secret message. Couldn't agree more! Great video!
I was considering doing this with adhesive backed cordura from the UK but now I might just do it using your method instead. Thanks Cody!
So glad you are back on TH-cam
Nothing beats G-code's Tactical Fuzz. I don't know how they bond that stuff to the Kydex, but it's perfect after the better part of a decade of daily use. Absolutely no peeling or delamination. Incredible.
Thanks for the advice. Can’t wait to try this. Also upvote for the watch. I’m wearing the same one on a Nato strap too😃
No idea what your channel is about but watched this video and loved the care with which you executed the project. I have a similar going slow but precise mentality and that isn’t seen very often. It always makes for a better end result 👌🏻
Subbed!
Thank you for your hard work Mr. Wranglerstar
So glad you’re back and healthy. I’d love to see you do a review on Alien Gear holsters. Great company out of Idaho.
Cody I am of the opinion that the ads you drop are audience appropriate, most of your audience understands you have to pay the bills 💪🏻
Is that the Rekieta stream in the background? I don’t like lawyers but those folks are great!!!
I’m glad you back and feeling better I’ve been praying for you and your family
Never would have thought. Thats awesome. Looks amazing.
Your approach to adds is working fine. Love the arts and crafts on this vid! Thanks!
If the holster effectively has a seam on the back edge, why wrap the cloth all the way around and have a cloth seam on the back side? why not just follow the same seam for both? Either way, this is an awesome wrap... I like that a LOT more than getting a camo print kydex. I would think it would make it a little quieter, and less "shiny" or reflective. I also really like that holster system.. I hate having the holster threaded in the belt, and then you need to take the pistol off, but the only way to do that is unholstering the pistol.. I like keeping the holder on the pistol like that.
Also, for the ads.... just FYI, my ads for this video were for Carter's children's pajamas..
Last thing.... the YT channel Donut Media also does in-video ads, however, they also add a little yellow progress bar across the bottom of the frame while in the ad part of the video... I thought that was kind of clever.
I never thought you would teach me about holsters. Boy was i wrong. I make leather and kydex holsters. Iv never thought about doing the wrap after the molding.
I don't mind the ads at all. Keep doing them!
Glad to see your feeling better Cody 👍
I will try this out, never seen it done before, thanks Cody
Finally, I always wanted one that was denim colored for when I use my paddle holster.
love the free kyle on the wood at 4:00
Definitely prefer the sponsors over the TH-cam ads
Ads? Yes. Cool holster? Yes. Glad you're back and healthy? Absolutely yes.
My brother has a home based holster making business in Vancouver. Hit me up with your specs and I'll get you one custom made. Glad to see you doing well brother!
+1 for sponsored videos. I feel this is a trend that TH-cam will adapt to in the near future but am all for getting more of the advertising $'s in you pocket. Well wishes to you and yours.
Thank you. I was gling to paint mine . Then I remembered I painted a plastic motorcycle helmet years ago. 10 days later the chemicals in the plastic started breathing through the paint causing it to Crack. So I found you and said ( that's it right there. That's what I'm going to do ).
Couldn't help but notice the Rekieta Law Rittenhouse Trial Live stream on your laptop. Ha, Love it! Been glued to it myself. Thank you for the great content Cody! Glad you're feeling better.