Hi TC. Great Video, Would you be able to show with video on how to fit the seat back on !!! I took mine off last year but cannot fit it back on !!! Kind regards.
1 year is a long time to go without the 3rd row seat. Hmmm......... its only a matter of aligning the seat and the rails properly for the installation. Let me see if i am going to remove the seats again soon.
Hi would there be a possibility that you could do an explanatory video for doing this for my ANH10 Alphard please? Unfortunately it appears quite different to the ANH20 and I’m so fearful of breaking something important. In the U.K. it’s so difficult to obtain these sort of interior cladding items. Thank you Peter
I wish I could help you out there. Indeed ANH10 is different from ANH20 cause even the way it folds up are different. I do not own an ANH10 for me to do any videos on so no luck there. Can't seem to find anything useful on the internet as well. Totally understand the fear of breaking something especially if your country does not have much availability to the parts. I have that fear as well whenever I am working on my wife's Ford.
Hi, I plan on removing the third row seat because it makes some sort of mouse like noise. Like squeaking sound. I tried to stow it away or have it built up but same problem. I used lubricant on anything that I could see but still same problem. Bumpy road gives that sound, sometimes sharp left or right turn do it too. I really don´t know where it comes from. Only right side under the seat somewhere. Now I want to remove it. Any advice on the noise?
Align the arrows at the seat and side panel. Lay the seat flat then pull the lever at the bottom right. It will pop out and you can secure it using the harness at the top.
@@TCsAnythingGoes hi tc, I lined up the arrow, near to window as your video, pull up the leveller, however the seat is moving front n back once the seat is turn up. No issue on passanger side. Only on driver side. Any ideas? Tia
Hey! I have a 20 Series Vellfire and had rails/sliders taken out after I used your videos to remove mid and 3rd row seats so thanks! But how do you remove that metal contraption with the two bolts sticking out where the 3rd row seat used to be?
I am assuming you meant the third row seat rails. Check out minute 12 of the below video I did. Let me know if it helps. th-cam.com/video/J_3-jjGe1as/w-d-xo.html
Alot of work. Thanks for sharing. However am hearing rattling sound whne cruising.. Not sure where is the sound coming from. Added rubber by the door hook but not helping. Sprayed grease on the sliding door side but not helping
It came with the car when I got it from the 2nd hand dealer. I guess the previous owner purchased it and had it installed. I am still trying to find back a replacement.
This guy loves what he is doing. Number of subscribers are very low compare to quality of his work. May be better accent would have help. People do get attracted / put off by that?
Thanks for your compliment. I think the way I pronounce some words as well as my grammar is not up to standard. Also.... most likely my voice as well cause I know I got a squeeky chipmunk-ish voice. I will see how I can improve on it. And you are right, I love what I do...... taking apart things. =)
@@TCsAnythingGoes you know that's very important - enjoy what you do. So watch the best most popular TH-camr and learn how they do things. Always good to learn and improve. All the best my friend
TC’s really knows how to give you info on how to do jobs on the Alphard, gold mine of info.
Awww, thanks for the compliment. I always worry my method of presentation might get confusing sometimes.
Thank for your demonstration to remove 3rd seat. I finding some video but you have shown this very clearly.
Glad it help you. Do check out some of my other videos on the Alphard as well.
These Aphard vids are really useful. Thanks a mil
I have the ATH20 2014 vellfire and the plastic handle doesn't just come off like that, it's different.
Hi TC. Great Video, Would you be able to show with video on how to fit the seat back on !!! I took mine off last year but cannot fit it back on !!! Kind regards.
1 year is a long time to go without the 3rd row seat. Hmmm......... its only a matter of aligning the seat and the rails properly for the installation. Let me see if i am going to remove the seats again soon.
@@TCsAnythingGoes That would be awesome 👍.
Hi would there be a possibility that you could do an explanatory video for doing this for my ANH10 Alphard please? Unfortunately it appears quite different to the ANH20 and I’m so fearful of breaking something important. In the U.K. it’s so difficult to obtain these sort of interior cladding items. Thank you Peter
I wish I could help you out there. Indeed ANH10 is different from ANH20 cause even the way it folds up are different. I do not own an ANH10 for me to do any videos on so no luck there. Can't seem to find anything useful on the internet as well.
Totally understand the fear of breaking something especially if your country does not have much availability to the parts. I have that fear as well whenever I am working on my wife's Ford.
Great video & excellent English . Thanks 🙏
Many thanks, I don't get much compliment for my English since its actually my secondary language.
This is perfect thank you so much easy to do with all your help
Hi, I plan on removing the third row seat because it makes some sort of mouse like noise. Like squeaking sound. I tried to stow it away or have it built up but same problem. I used lubricant on anything that I could see but still same problem. Bumpy road gives that sound, sometimes sharp left or right turn do it too. I really don´t know where it comes from. Only right side under the seat somewhere. Now I want to remove it. Any advice on the noise?
Remove the seat and shake it. You might have something stuck inside it like mine as well (a coin was stuck in it)
How did you manage to fold up the left seat in the beginning?
Align the arrows at the seat and side panel. Lay the seat flat then pull the lever at the bottom right. It will pop out and you can secure it using the harness at the top.
@@TCsAnythingGoes hi tc, I lined up the arrow, near to window as your video, pull up the leveller, however the seat is moving front n back once the seat is turn up. No issue on passanger side. Only on driver side. Any ideas? Tia
@@ciatfeitay7951 add me up on FB TC's Anything Goes Channel
Thank you from England 😜
You are most welcome from Malaysia 😁
Hey! I have a 20 Series Vellfire and had rails/sliders taken out after I used your videos to remove mid and 3rd row seats so thanks! But how do you remove that metal contraption with the two bolts sticking out where the 3rd row seat used to be?
I am assuming you meant the third row seat rails. Check out minute 12 of the below video I did. Let me know if it helps.
th-cam.com/video/J_3-jjGe1as/w-d-xo.html
Hi there. Can you please advise- once third row seats are out, what are dimensions in back? Space for a mattress?
Hi, do you know how to replace rear middle seat belt
Sorry for the late reply. It can sort of fit a inflatable queen size mattress.....
Alot of work. Thanks for sharing. However am hearing rattling sound whne cruising.. Not sure where is the sound coming from. Added rubber by the door hook but not helping. Sprayed grease on the sliding door side but not helping
One of the best way to find rattling sound is to have someone else drive and you climb around the car to try to listen for the sound.
Hi TC. Regarding your Alphard floor (carpet?), how do you put them in? It looks very nice and tidy. Can you please reply? Thanks.
It came with the car when I got it from the 2nd hand dealer. I guess the previous owner purchased it and had it installed. I am still trying to find back a replacement.
Thanks very helpful , just got to get the rails out 😁.
Thank you! Made the job much quicker.
Very helpful thanks for posting😃
my pleasure. Always glad I could help.
Putting it back on is a total nightmare, can you show to do that?
I did it lol, don't worry 👍
I am guessing the alignment was the difficult part of installing it back.
Молодец ! Отличная работа! Большое спасибо !
Thank you thank you for the video really helps
Glad it helps.
Keep them coming
Thanks tc great video
Many thanks
Thanks !
Tqvm sir
I love you thanks 😆👍
Спасибо за видео!
This guy loves what he is doing. Number of subscribers are very low compare to quality of his work. May be better accent would have help. People do get attracted / put off by that?
Thanks for your compliment. I think the way I pronounce some words as well as my grammar is not up to standard. Also.... most likely my voice as well cause I know I got a squeeky chipmunk-ish voice. I will see how I can improve on it. And you are right, I love what I do...... taking apart things. =)
@@TCsAnythingGoes you know that's very important - enjoy what you do. So watch the best most popular TH-camr and learn how they do things. Always good to learn and improve. All the best my friend
Ignore my last comment, I was wrong.. was the same.. lol
Спасибо, всё понятно и просто, теперь я могу сам это сделать.