How to Replace Sway Bar Links 2004-12 Chevy Malibu
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ic/1ASS...
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2008-2012 Chevy Malibu.
• Check here for more videos on the 2008-12 Chevy Malibu: • Chevy Malibu 2008-2012...
This process should be similar on the following vehicles:
2004 Chevrolet Malibu
2005 Chevrolet Malibu
2006 Chevrolet Malibu
2007 Chevrolet Malibu
2008 Chevrolet Malibu
Tools you will need:
• 17mm Wrench 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Locking Pliers 1aau.to/oa/1AXA...
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Gloves 1aau.to/oa/1AXS...
• Safety Glasses 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Chevy Malibu 2008-2012 7th Generation: • Chevy Malibu 2008-2012...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I have a 2012 malibu and just found your channel. I have to replace a sway bar and my brakes this week and your videos are very helpful. Thank you so much.
The OE links are plastic and are different requiring a T40 torx bit socket
Nice, right to the point and well made, thanks!.
No grease gun needed for these ones?
Thanks, money saver!!!
You probably over torqued the lugs with the air gun. Setting the torque wrench to 100 ft lb won’t help if it’s already torqued to well over 100 ft lb
Shops always over torque the lug nuts. That's why it's nearly impossible for me to get them off when I get home.
Trailing arm bolt
You must do the rear link swar bar
Safely supporting the verhical ?? Never heard it said th at way
Why or when should you replace
When they clunk lol
You forgot foot protection