Thanks for the video! I had checked all of my fuses before I saw your video and was really scratching my head. I watched your video and was about to try swapping the relays when you mentioned about tapping the motor. I tapped it once about the lightest I've ever tapped anything and it started right up! Thanks again.
Quick rundown… The AC in my 2007 F150 still blows very cold but sometimes the blower will just quit working all of a sudden. Usually after turning the truck off, then turning it back on the AC blower won’t come back on. You can still feel cold air kinda leaking out of the vents but the fan wouldn’t come on. I started off with the blower motor resistor, I replaced that but it still didn’t work. Then I watch your video about checking the fuses and all of them were in good working order. Then you got to the part of your video where are you hit on the blower motor itself and when I replicated that, the air came right on. So I would like to thank you for putting this video out because my next step was going to be bringing it to a shop and I know they would have charged me an arm and a leg just to look at it.Anyway thank you so much my friend. 🙏🙏🙏
@@LehewTech I celebrated too soon. My truck is blasting hot air only again when I put it to A/C. I took my entire dash apart yesterday and changed out the actuator motor in hopes that would be the issue, but it wasn't. I also did remove some loose foam pieces in the tubing, but again didn't solve the issue. I tried swapping some fuses like you mentioned and yesterday it kicked back on, but today it back to do doing the same stupidity. I'm able to remove the actuator motor and turn the door by hand, but as soon as I let go it swaps back to heat only. The compressor is spinning and the line seems cool to me, but I'm not sure what the hell to do. A local mechanic told me it'll be an 8+ hour job to potentially find out the issue. Any help you could possibly offer?
@@LehewTech I'm not too sure I'll need to take a look at it today. The white bit that came with the new motor and the original both fit in smoothly and I can turn it manually to redirect the door, but as soon as I let go when the air is blowing it swaps to hot air. Also the same with the motor I can manually direct it and leave the motor on unplugged and it will stay, but as soon as I plug it in it swaps. I'm totally stumped on what to do
when I turn my heater to on, my hazard and high beam lights come on steady bright in dash. have no blinkers or dash lights. but no heat. i hear a click down there on the relay, but nothing. turn heater switch off and the hazard and high beam lights go out, and i have blinkers. What is up with that?? Thank you, wes,
Have a 2007 Ford F-150 went out to my truck last night and went to turn on the heater motor in the heater and it stopped blowing it was working fine always
Thank you sir for fitness video up with you all the troubleshooting steps and then you said tap on the blower motor and three tabs and I’ve got air-conditioning so now I know where to start apreciation do you
01 f150 Supercrew. Mine kept blowing the big 30A fuse in the under hood power hub. I disconnected the motor, swapped Relay #5 (they are all the same part #. I got power to the motor connection plug. So my fix was a failed relay..
Hello I’m having trouble with my a/c every time I turn it on cold position it blows really hot air I replaced the a/c actuator and fuses and I really don’t know what it is please help me it’s really hot here in Arizona
Hi man. On my transit custom I have got this issue but speed control button has got the lights on everything seems fine just the air is not blowing at all. Any idea what's with that ? Thanks
My blower is stuck on max. Temperature change works. I just replaced the blower motor resistor (auto) and I’m still having blower max issue. Any advice ?
What if no ground? I have 2010 F150 with dual zone, and replaced the "resistor" speed control and harness before watching this video, but fan does not work. Test light reveals power to one of the two wires that connects to fan, but there is no ground on the other side.
I have an 05 f150 manual heat and air. The fan will not kick on no matter what what setting. My blower motor will work when given power outside of the wiring harness. All the fuses work. The relay is brand new from ford. The resistor is brand new from the autozone. And the switches themselves in the dash all have power and check out. I can't figure out wtf is wrong please help.
Thanks for the video! I had checked all of my fuses before I saw your video and was really scratching my head. I watched your video and was about to try swapping the relays when you mentioned about tapping the motor. I tapped it once about the lightest I've ever tapped anything and it started right up! Thanks again.
You have taken a lot of the head scratching out of it for me Ty👍👍
Quick rundown… The AC in my 2007 F150 still blows very cold but sometimes the blower will just quit working all of a sudden. Usually after turning the truck off, then turning it back on the AC blower won’t come back on. You can still feel cold air kinda leaking out of the vents but the fan wouldn’t come on. I started off with the blower motor resistor, I replaced that but it still didn’t work. Then I watch your video about checking the fuses and all of them were in good working order. Then you got to the part of your video where are you hit on the blower motor itself and when I replicated that, the air came right on. So I would like to thank you for putting this video out because my next step was going to be bringing it to a shop and I know they would have charged me an arm and a leg just to look at it.Anyway thank you so much my friend. 🙏🙏🙏
Ditto!!
Got a new subscriber with saving me hundreds of dollars from a mechanics.
Tremendous! You are a mechanic now
@@LehewTech I celebrated too soon. My truck is blasting hot air only again when I put it to A/C. I took my entire dash apart yesterday and changed out the actuator motor in hopes that would be the issue, but it wasn't.
I also did remove some loose foam pieces in the tubing, but again didn't solve the issue. I tried swapping some fuses like you mentioned and yesterday it kicked back on, but today it back to do doing the same stupidity.
I'm able to remove the actuator motor and turn the door by hand, but as soon as I let go it swaps back to heat only. The compressor is spinning and the line seems cool to me, but I'm not sure what the hell to do.
A local mechanic told me it'll be an 8+ hour job to potentially find out the issue.
Any help you could possibly offer?
@@justinbrown3513 is the blend door stripped where the actuator hooks up to it?
@@LehewTech I'm not too sure I'll need to take a look at it today. The white bit that came with the new motor and the original both fit in smoothly and I can turn it manually to redirect the door, but as soon as I let go when the air is blowing it swaps to hot air. Also the same with the motor I can manually direct it and leave the motor on unplugged and it will stay, but as soon as I plug it in it swaps. I'm totally stumped on what to do
@@LehewTech I even bought a second set of digital controls off of a 2008 Lariat and unfortunately that didn't help.
Very well explained 👏
Fantastic video brother! Very helpful & right to the point :)
when I turn my heater to on, my hazard and high beam lights come on steady bright in dash. have no blinkers or dash lights. but no heat. i hear a click down there on the relay, but nothing. turn heater switch off and the hazard and high beam lights go out, and i have blinkers. What is up with that?? Thank you, wes,
I have a very very similar issue except I cannot shift once the heater is on or when turning the headlights on
Have a 2007 Ford F-150 went out to my truck last night and went to turn on the heater motor in the heater and it stopped blowing it was working fine always
Wow I appreciate all the information, thank you.
THANKS YOU SO MUCH!!!! YOU SAVE A LOT OF MONEY 💰
Thanks for the vid! Very much appreciated!
Very good video
Thank you sir for fitness video up with you all the troubleshooting steps and then you said tap on the blower motor and three tabs and I’ve got air-conditioning so now I know where to start apreciation do you
Great video
Exelente presentation
Nice Job. Thanks
Definitely helps locate easy checks. Thanks for that? Were you Army Aviation Avionics? 😂
This took several hours to replace all components tight space yall
01 f150 Supercrew. Mine kept blowing the big 30A fuse in the under hood power hub. I disconnected the motor, swapped Relay #5 (they are all the same part #. I got power to the motor connection plug. So my fix was a failed relay..
Fixed my issue I comes on but doesn't get cool blows out hot air
Thanks you is a great video
Hello I’m having trouble with my a/c every time I turn it on cold position it blows really hot air I replaced the a/c actuator and fuses and I really don’t know what it is please help me it’s really hot here in Arizona
Hi man. On my transit custom I have got this issue but speed control button has got the lights on everything seems fine just the air is not blowing at all. Any idea what's with that ? Thanks
I checked all of the fuses you pointed out and replaced the relay. It still doesn’t work. Any other ideas? Great video btw!
Did you figure it out
I have a 2007 f-150 I have no dash lights when I turn on head lights switching on the heater dash lights come on but have no fan any suggestions
My blower is stuck on max. Temperature change works. I just replaced the blower motor resistor (auto) and I’m still having blower max issue. Any advice ?
What would cause the blower motor resistor to keep going out on my 2011 f 150?
Hey are you still around? I need to ask you a few questions concerning my 2006 Ford F-150.
thank you for that info.
what about ford f150 2008 triton, it has same issue, so do you think doing what you said is gonna do the job?
thanks
i have a 21006 5.4 f150 i install new blower motor resistor and new blower motor but still blower motor no working clime control working
THANK YOU!!!!!!!!!!!!!!
What if no ground? I have 2010 F150 with dual zone, and replaced the "resistor" speed control and harness before watching this video, but fan does not work. Test light reveals power to one of the two wires that connects to fan, but there is no ground on the other side.
The HVAC control panel provides a signal to the "resistor" speed control.. it could be that the panel is bad
Where is the 12V charger Fuse ?
where is the cooling fan relay or fuse
Good stuff! Found the loose connector on the motor thanks to this vid!
Blower motor only runs in high
I have an 05 f150 manual heat and air. The fan will not kick on no matter what what setting. My blower motor will work when given power outside of the wiring harness. All the fuses work. The relay is brand new from ford. The resistor is brand new from the autozone. And the switches themselves in the dash all have power and check out. I can't figure out wtf is wrong please help.
Did you try hard wiring the blower to see if your blower was bad?
Here is a link to the relay fix. th-cam.com/video/NBCNfs1gHso/w-d-xo.html When you combine that solution to this schema, it is pretty easy.