03-07 is so much easier. Just swap the regulator and door harness BCM and drive side fuse block.. add power to passenger side then add data wire to drive side from BCM b12 pin out. And your done. Now you have full power windows locks and mirrors. Thats what i did. Only bad thing is the air bag light will be on do the bcm swap
So to be more exact I just need The bcm Door harness And add power to passenger side and tie to bcm b12 and I just plug into the current fuse box ? Or what is the drive side fuse box ? Or are you just saying to plug the harness into the driver side fuse box ? Also have you tried to program your key fobs after doing this ?
@@Five_pc you need the driver side fuse box from the power door rig. The passenger door switches are what hold remote programing. When I did mine I didn't have to reprogram the remote it just worked. I have a video on my channel that better explains what I did.
I did it n it they work for a little bit, after going up n down a few times it keeps blowing the fuse, im using the driver side fuse box to get my power, they are on there own fuse taps and own grounds, any help would be appreciated
Not to both but how did you wire the passenger side ? Would be very appreciated driver switch can move passenger window but passenger switch doesn’t do anything
Would this work this the heated sear buttons on the door on a 99 to 02 tagoe door pannel with all the buttons. My trucks an 06 that i added leather captains myself its a base model like yours. But could i wire some how the heating element in the seat with the switch on the door
Okay so I just thought about this my truck currently has manual windows with power locks, can I reset my key fobs to run these new locks on the new door if wired ?
This info is gold keep up the good content
I just swapped the doors cuz I’m repainting the truck but good info 👌🏻
@@aaaaaa72060 my doors matched and were good doors, otherwise that’s another way to do it
How’d you wire the passenger side cause you never did showed
If I have a 2000 gmc sierra as a donor doors and all could I swap those doors over and use those same switches ? Thanks for a great video
03-07 is so much easier. Just swap the regulator and door harness BCM and drive side fuse block.. add power to passenger side then add data wire to drive side from BCM b12 pin out. And your done. Now you have full power windows locks and mirrors. Thats what i did. Only bad thing is the air bag light will be on do the bcm swap
Do mirror turn signals and defrost also work with this method?
If u get the bcm and airbag module from the same truck u won't have the air bag light
@@1234chris the mirrors work. Defrost no.
So to be more exact I just need
The bcm
Door harness
And add power to passenger side and tie to bcm b12 and I just plug into the current fuse box ? Or what is the drive side fuse box ? Or are you just saying to plug the harness into the driver side fuse box ?
Also have you tried to program your key fobs after doing this ?
@@Five_pc you need the driver side fuse box from the power door rig. The passenger door switches are what hold remote programing. When I did mine I didn't have to reprogram the remote it just worked. I have a video on my channel that better explains what I did.
Can you use the 99-02 window switch with a 03-06 door panel ?
I did it n it they work for a little bit, after going up n down a few times it keeps blowing the fuse, im using the driver side fuse box to get my power, they are on there own fuse taps and own grounds, any help would be appreciated
@@henry7678 I wired mine to the 4x4 fuse with a 10 amp fuse
You don’t know how much time I could’ve saved if I saw the vid 2 years ago
Not to both but how did you wire the passenger side ? Would be very appreciated driver switch can move passenger window but passenger switch doesn’t do anything
Not to bother**
You need to ground the passenger side switch
Would this work this the heated sear buttons on the door on a 99 to 02 tagoe door pannel with all the buttons. My trucks an 06 that i added leather captains myself its a base model like yours. But could i wire some how the heating element in the seat with the switch on the door
Do I just wire it like this video? Or did you have to wire in relays and you just didn’t show it?
Okay so I just thought about this my truck currently has manual windows with power locks, can I reset my key fobs to run these new locks on the new door if wired ?
So will this work on a 04 if you get 99-02 switches? Cause I heard they are different
What wire is ground