Condensing some Q&A: 1) Could I have used stepper motors? - Yep but we want a crazy demo for the custom PCB motor controller we made (preorder at motorgo.net) 2) Could we erase it automatically? - Maybe. we are thinking about trying it - its a little bit trickier than expected. Just vibrating it doesn't work. 3) Can we make a video/play Doom/ do bad apple with it - YES! easily! we discussed it before hitting the time crunch and throwing out the idea bc we have to figure out #2 first. Maybe later 4) Isn't it "Just a plotter" - I think a lot of y'all missed the part about the camera. This device takes pictures, processes them on our server, then draws it. Alternatively we can run it as a plotter as you saw with the memes. I should have added more demos from the camera itself - they do work well! It just wasn't filmed with the purple pretty lighting of the final demos and I didn't fit it into the storyline without slowing down too much stuff. Maybe we will post some on shorts? If you really want to see it we share that type of stuff with our discord all the time. 5) Its not the first etch a sketch camera - correct! I didn't know about the raspberry pi stepper motor camera until yall pointed it out! I do think ours is the first that goes this fast, and the first that uses such a sick nasty image processing pipeline. But that's just too a long title... so I hope you forgive me for that. 6) Could I have used stepper motors? - Yep but we wanted a crazy demo for the custom PCB motor controller we made 7) Did we really have 600 subs 2 days ago? - No we had 680 subs when I posted the video 8) Did we lie about the whole project and none of it is real? - literally how would I have even done that chill out 9) Could I have used stepper motors? - Yep, but we wanted a cool demo for the custom PCB motor controller 10) Could I have used stepper motors? - My goodness just watch the video and I explain it! 11) Who is my editor? - its me, hi thanks for being here I'm so happy yall like the video :) 12) Could I have used stepp -- let me just stop you right there Thanks, Alex
I made that same joke to my kids during the eclipse and thought it was S-Tier dad humor. Thank you for validating me. Also, amazing build and video. Got an instant sub from me🎉
I'm an embedded engineer. I primarily do software, but also do electrical engineering if needs must. This is genuinely one of the coolest projects I have ever seen. I've worked on some things that might be "cooler" on paper, but they were also significantly higher budget and done by a seasoned, skilled team. Doing this in your garage in such a short time frame is an astonishing accomplishment, and I tip my hat to you all! What a wonderful video!
I was really doubting your chosen path to implement your own servos and motion controller from scratch, but in the end, the speed of the machine would only be possible with servos, and you did a great job on the motion controller. Impressive! Did you ever think to try an existing CNC controller, like GRBL or LinuxCNC to run the machine? As you discovered, there's a LOT that goes into a good motion controller and a good servo amplifier - I just wonder how much better it could be with more refined code running it.
The algorithm did its job and sent me your way, I am a high school robotics coach and you guys are showcasing a lot of what my team of mentors try to teach. very impressive, keep up the good work. the video was captivating and well produced and the project was stunning.
You guys are amazing. This was so fun to watch.... I'm quitting smoking weed and looking everywhere for long, drawn out content to distract me, and your channel has been a life saver.
I'm some random 54yr old guy sitting on a boat on the other side of the world when this popped into my feed. I just want to say that videos like these fill my heart with joy. Knowing that young, talented people are doing this kind of thing in their homes gives me faith in humanity because one day you will be in positions of power and responsibility, running our world. To see the level of dedication, enthusiasm, intrigue and fun you're having, all the while while learning, is truly inspirational. Feeding all that back to us in an entertaining video is a bonus! Good luck with your future endeavours.
Oh Jamie, is it really random? Given I build robots and AI and we are both boat people.... some dots joining.... Anyway, well said. Great storytelling here and a wonderful project to inspire others!
wow. comments like this are what let us push through the harder moments in a project - this whole comment section has been so full of support I just can't believe it. good luck on the boat stuff mr old guy, I hope your boat adventures treat you well :) -alex
Others are jokingly asking "can it run Doom?" But hear me out: Step 1: Develop a mechanism to shake/vibrate the EtchaSketch and clear the screen between drawings. Step 2: Render tons of Doom frames on the EtchaSketch and develop an AVG time from start>>completion>reset. Step 3: OG Doom ran at 35fps. Calculate this avg time against the frame rate, and use that number to estimate how many more models you would need to build to make this feasible. Let say you make 6 more EtchaSketches (it'll still be incredibly slow). Step 4: Each EtchaSketch gets a camera that photographs each frame at completion. These frames will all be compiled into a final animation. Step 5: Modify the emulator to run doom at the FPS of your multiple Etch-a-sketches. Step 6: Develop an AI to play Doom in super slow mo. Step 7: Begin the slowest game of Doom ever played. Additionally, prepare yourselves for the longest session of troubleshooting and monitoring you've ever experienced. Edit: Just read the update comment. Im glad yall are working on more iterations!
Michael would be like "So I started out trying to make a self drawing etch a sketch, but when I opened it up I discovered the aluminum powder inside and decided to mix in iron oxide and replace the stylus with magnesium so now it's an etch a sketch that will spontaneous trigger a thermite reaction!"
Dude! I had this exact same idea for such a long time in the back of my head. I'm very glad someone did it finally, you guys did an awesome job in such a short amount of time. I cannot wait on how much this can be improved and polished with a little more time. Hope you have a great time at open sauce!
Everyone talking about how cool the robot is(it is really cool) but can we also talk about the level of production that went into this video masterclass 👏🏼
Oh I was thinking the same! 14 days to build a robot and they got the forward thinking to shoot every detail of the journey. Like there was a cine team behind.
Every Flavor of Robot, you have done it. This is the exact type of video that made Stuff Made Here blow up and become successful in the span of a year.
I really wanted to address the stepper motor thing at the beginning of the video but I knew people's eyes would glaze over - had to trick them into learning about motors >:) sorry that caused you pain tho, we all must make sacrifices and yours has not gone unnoticed -alex
Hey guys I have to say, extremely inspirational. I'm a cyber security guy but I've been diving into this stuff so much more after picking up a 3D printer and Fusion360 a few years ago. It's become my favorite hobby and you've definitely inspired me to restart some unfinished projects, also I'm sure you'll inspire many others to start their first, keep it up!
@@aivarsgraudins8423 , caffeine amplifies the effect, but it is not the cause, because decaffeinated coffee will also make people need to go, and because there are many other caffeinated drinks out there (like soft drinks and tea) that don't make people need to go. The real cause is the gastrin hormone production that is boosted by coffee.
overlaying the video of discovering your exhibitor application was accepted over top of the demos being shown is such a sweet editing choice! the full swing of both story arcs happening at the same time really lends an unexpected amount of emotional weight to both of them, incredibly inspired choice, really striking :O
you know, it was one of those editing decisions that was kind of happenstance - bc I accidentally filmed the reaction in portrait mode out of excitement but yeah then I watched it back and knew it had to stay like that :) I can never tell if people notice the editing tho so I love that you also enjoyed it like I did while making it :)) -alex
❤I am just amazed at the support here - I thought we were just going to take a few selfies on the etch a sketch and show it to our friends hahahah -alex
Thanking us for 600 subs, meanwhile 3 days later you’re at 27.6K. Congratulations man, really goes to show how much your hard work, dedication, and arguable most importantly collaboration pays off. Beautiful
Professional Etch A Sketch artist here - really awesome video! Below I shared my real-time thoughts as I watched the video. At around 5:48 I was doing a lot of head-nodding lol. It's very important to emphasize that every Etch A Sketch is a unique plotter device which comes with its own particular idiosyncrasies. It's something I subconsciously accommodate with muscle memory, as I sometimes work with units that have ever-so-moderately higher tension in one knob vs the other, or there's drag which causes those spikes you visualized, etc. If you would ever like advice on which types of Etch A Sketch might provide more ideal/consistent internal mechanics for you, feel free to reach out as there are some go-to models I tend to look for as my ideal canvases. Though it seems like you've done a fair amount of programing to accommodate the idiosyncrasies of the unit you've got! I love how violently fast this is! 🤣 frankly I'm a bit surprised that the mechanics can handle that speed. Thennn I got to 11:10 and my suspicions were confirmed 😢 As soon as I saw you starting to open that Etch A Sketch my first thought was nooooo just go buy a new one! It's not worth the time/energy it'll take to fix it! But then that got me thinking that your programming was very specifically calibrated for that unit you've been using, but then I thought, well maybe it's okay, maybe recalibrating won't be so hard with another device. As someone who has seen a number of Arduino Etch A Sketch projects in the last 15 years, the breakthrough at 22:03 is incredible. One of my biggest visual gripes are the giant diagonal lines used to keep everything connected that detract from the image, so this is an amazing breakthrough! Truly amazing video, I hope this Etch-A-Robot gets the accolade it deserves! 🏆
I can’t tell you how many of your videos we watched to research this!! you’re a true inspiration thanks for the wonderful comment ❤️ We’ll definitely be reaching out - our etchbot is not the happiest with us after this video…😳😳 -Jesse😎
@Princessetch Do you have any specific recs for a *sturdier* etch-a-sketch? We're looking for the consistency you described, but with the same form factor as the regular model. Unrelated...but let us know what's a good image for us to etch for ya! -Jesse 😎
@@EveryFlavorRobot by sturdier do you mean an Etch A Sketch that is heavier, or an Etch A Sketch that can handle more rapid/repetitive control usage? Assuming the former, the current models of the Classic Etch A Sketch are the heaviest. Assuming the latter, I'm not sure if any particular model would be more robust than another as from my understanding the wiring used inside hasn't really changed significantly in the last 60 years. It might be worth trying a unit manufactured by Ohio Art (you'll see the logo on the top left) to see if the components inside hold up better. Each unit will have its own idiosyncrasies though, and one that might be of more concern to you is the "ghost lines" that compound over time. Newer units tend to be less problematic in that regard than old ones, as the stylus in newer units is made of plastic and probably doesn't leave as deep a mark on the underside of the glass as older units that have a metal stylus. One bonus of older Ohio Art units is that the knobs are MUCH more easily removable. Feel free to email me (jane [at] princessetch [dot] com) and I can share exterior photos of various models over the years to showcase differences, which might guide you in determining what units might benefit you the most. Your offer for an image to etch for me is most certainly kind! Being that I'm Princess Etch I'd love to see a crown rendered on your robot. As for the level of detail/photorealism, I'll leave that to your discretion 👑☺️
I was alive when the etch a sketch was a brand new toy. Every kids fantasy is to make this toy draw a good picture. Ne er dreamed this would happen when I was kid. I guess if you live long enough...you really do get to see everything. I just did. Well done dudes.
You guys are friggin talented. To do this in 2 weeks is absolutely insane, and to make such an entertaining video is the cherry on top. Can't wait to see it in San Fran!
thank you for being one of the few youtubers brave enough and willing to use non-stepper motors. They are so overused. This is probably an ideal use case for steppers, but I feel like so many totally use steppers when regular motors are more called for. So this was a breath of fresh air!
I appreciate this comment :) so many people are raving about how we didn't use steppers and I guess the coffee analogy went over their heads - the point was a challenge and a spectacle! Otherwise it would have been one of a thousand boring old stepper motor etch a sketches 😝
What you need to do is... a video! I mean, you need to build a version of the robot that can erase itself, and have it draw each frame, take a photo of the frame, erase, and repeat. It could probably render a 10-minute video in a week.
that would be awesome. sounds like they just need some extra code hooked up to whatever clears it. one that connects to a camera and increase the accuracy and they have it working!
Kudos on the design. I'm 40yrs old now & remember what this design resembles! *Instant Cameras such as the Polaroid* were quite popular for a while. They all had that classic *'Pop-up'* feature. Popping it open to expose the camera & printer shoot. *So for clarity. We went from Instant Print to digital cameras. Now,because they could & wanted to,we have 'Instant Draw Cameras'!* Nice job y'all!!!*
I don't know, but am glad that this turned up in my feed. With everything that is going on, it's awesome to see the humor, friendship, drive, and a positive way forward.
I just refreshed the page a couple hours after I saw this video and was shocked to see the crazy sub count increase Congrats on 12k, you deserve it Edit: 12K?!
This is beautiful. I'm an amateur mathematician and roboticist (and planetary scientist), but it seemed to me the motors were way too fast right from the start. I'm glad you sought to slow them greatly. If it's good enough for your Mom, it's good enough for me. I subscribed immediately. Well done!
I'm not an engineer. I break everything I try to fix. But even I was wondering why you had the etch a sketch inputs at such a wildly fast speed! Great video, I'm very impressed. I broke my etch a sketch to see what was inside in 1978!
I said "Just use stepper motors and run it like a CNC machine." Before watching the video, and lo and behold. Great job, I'd love to see a V2 with a bit more time.
when i started watching i thought you had like 1m subs, content has that much quality, shocked when saw it is only 1k. hope more people sees this video and blows up. keep it up!
You guys are going to be a big name on TH-cam. Your production value, robotics, and personalities are going to take you very far. I look forward to seeing what you guys have in store for us in the future. Needless to say, I subbed.
I would love to see a version of this play bad apple. If it had an automatic rest function it would just be beautiful, even if it took an hour I would sit and watch it.
@EveryFlavorRobot it's a music video that is known for being played on lots of displays (and "displays"), similar to DOOM. Just google it and you'll see. I believe you'd need a vibration motor or similar to clear it after each frame to get it to automatically play the video
@@EveryFlavorRobot I posted a comment explaining it but it seems youtube deleted it? Anyways: It’s a music video that is commonly used to demonstrate unusual forms of video playback due to it only using black and white. The video itself has a long and complicated backstory, as it is a video for a fan cover of a game theme from an old Japanese game for the pc98. The video was made in MMD. Just google bad apple, it has a ton of views!
Really glad I was directed to this video. About to go to college for robotics and it’s cool to see this kind of process. Graduating FRC member. Go team 8808
Video goes up 11 hours ago. Video states that they recently hit 600 subscribers. Check subscriber count. 1,100 subscribers. Talk about a blowup holy cow.
Today was my university exam and I had TSP (Travelling Salesman Problem) in my syllabus! I was so hyped when i was studying about it and voila I can see it being used practically kudos man nice content!
So glad the algorithm did it's thing! You're already at 30k subs and I'm incredibly happy to be one of them! Can't wait to see your future projects. And congrats bro, you did it!!
At first, I wasn't sure but your collective enthusiasm, laughter, and determination made me stay for the entire video! You guys rock!! I can't wait to see what else you come up with. Outfitting this Etch-A-Sketch with a camera/computer vision so that it can draw what it sees, would be absolutely killer!! Best of luck to you all! BTW, I had an Etch-A-Sketch in the early 1950s...yes, I'm an old dude but still in love with Tech!! Cheers!
Congrats on getting into Open Sauce! I hope you get to hang out with lots of other robotics TH-camrs! Great project and great video - it's great to see the progression and how you overcame the engineering problems. Making a video of it all must make it even harder!
thanks! We've been meeting a few through the open sauce discord and I'm already so excited. Its crazy how engineering problems almost naturally follow the story arc people are used to finding in media! Something about being excited to do stuff and then it blowing up in your face idk -alex
Absolutely awesome project its incredible how that thing actually works so good at such high speeds too- The amount of work that went into it really shows! (Great excuse to use the CO2 laser for the acrylic panels! it makes it look so much more clean and mesmerizing!) Absolutely criminal that you do not have more subscribers and recognition for all the work and passion put into these projects! Really loved the "this is fine" demo it just looked like everything was melting and was very silly
This video was awesome! so glad it showed up in my recommended. The production value was insane, has that Michael Storen feel to it but I have to say - I enjoyed this more!
I knew a kid in highschool that could make anything on an etch a sketch every day he made a piece of art and the library hung the damn thing on the wall Every morning. He made faces and cars and houses and animals and all sorts a shit. Honestly the most impressive thing I’ve seen to this day
holy cow yall went to 600 to almost ten thousand subscribers?! in just one video?!!?? thats insanity. congratulations! it was well earned. cant wait to see yall at OS2024!
Instant subscribe after I seen it drawing in the opening. This is so crazy impressive very reminiscent of when I stumbled on will years ago. A silly concept but an outrageous amount of understanding and effort put into it good for yall.
Condensing some Q&A:
1) Could I have used stepper motors? - Yep but we want a crazy demo for the custom PCB motor controller we made (preorder at motorgo.net)
2) Could we erase it automatically? - Maybe. we are thinking about trying it - its a little bit trickier than expected. Just vibrating it doesn't work.
3) Can we make a video/play Doom/ do bad apple with it - YES! easily! we discussed it before hitting the time crunch and throwing out the idea bc we have to figure out #2 first. Maybe later
4) Isn't it "Just a plotter" - I think a lot of y'all missed the part about the camera. This device takes pictures, processes them on our server, then draws it. Alternatively we can run it as a plotter as you saw with the memes. I should have added more demos from the camera itself - they do work well! It just wasn't filmed with the purple pretty lighting of the final demos and I didn't fit it into the storyline without slowing down too much stuff. Maybe we will post some on shorts? If you really want to see it we share that type of stuff with our discord all the time.
5) Its not the first etch a sketch camera - correct! I didn't know about the raspberry pi stepper motor camera until yall pointed it out! I do think ours is the first that goes this fast, and the first that uses such a sick nasty image processing pipeline. But that's just too a long title... so I hope you forgive me for that.
6) Could I have used stepper motors? - Yep but we wanted a crazy demo for the custom PCB motor controller we made
7) Did we really have 600 subs 2 days ago? - No we had 680 subs when I posted the video
8) Did we lie about the whole project and none of it is real? - literally how would I have even done that chill out
9) Could I have used stepper motors? - Yep, but we wanted a cool demo for the custom PCB motor controller
10) Could I have used stepper motors? - My goodness just watch the video and I explain it!
11) Who is my editor? - its me, hi thanks for being here I'm so happy yall like the video :)
12) Could I have used stepp -- let me just stop you right there
Thanks,
Alex
love the vid. love the q&a haha
Great video! Why didnt you guys use stepper motors though?
But, could you have used stepper motors? 😂
You should be arrested for anti human activities for using Ai.
@@TheLight2323 stepper? I don't even know her!
the way the title cards got better and better as the project progressed was *chef's kiss*
I feel so seen rn, can never tell if people notice those things 🥹
@@EveryFlavorRobot 100% !!
@@EveryFlavorRobotwe definitely notice.
The storytelling overall was top notch
I was waiting with bated breath for the postman problem to be solved on the cards. New sub here, outstanding work!!! @EveryFlavorRobot
That/those Etch-A-Font(s) made this ex typographer’s heart all warm and gooey. 👌😘
"We had to take a detour to stare at the sun, which kinda sucked because something was in the way." Had me dying! 😂
I made that same joke to my kids during the eclipse and thought it was S-Tier dad humor. Thank you for validating me. Also, amazing build and video. Got an instant sub from me🎉
This is cool as hell. Can’t wait to see this in person at open sauce this year!
jacksflims
octagon of oil
Hidden jacksfilms comment erm where is my le epic achievement
@@molonuld7102 johnmovies. Joecinema
@@Q9r8 Tony Zaret is that you
I'm an embedded engineer. I primarily do software, but also do electrical engineering if needs must. This is genuinely one of the coolest projects I have ever seen. I've worked on some things that might be "cooler" on paper, but they were also significantly higher budget and done by a seasoned, skilled team. Doing this in your garage in such a short time frame is an astonishing accomplishment, and I tip my hat to you all! What a wonderful video!
!! praise like this from an embedded engineer goes so far :) thanks for the support! I love embedded systems (as you maybe can see)
Something people keep asking me so: ALL DEMOS ARE 1X SPEED
it just really goes that fast ;)
Wow im surprised the internal mechanism can keep up! Great work!
I was really doubting your chosen path to implement your own servos and motion controller from scratch, but in the end, the speed of the machine would only be possible with servos, and you did a great job on the motion controller. Impressive! Did you ever think to try an existing CNC controller, like GRBL or LinuxCNC to run the machine? As you discovered, there's a LOT that goes into a good motion controller and a good servo amplifier - I just wonder how much better it could be with more refined code running it.
@@gorak9000 the speed would have been possible with steppers too, depending on the specific steppers and drivers used.
@@conorstewart2214 sure but at what size and cost?
should of put a stopwatch next to it to prove it because that looks unbelievable. good job!
The algorithm did its job and sent me your way, I am a high school robotics coach and you guys are showcasing a lot of what my team of mentors try to teach. very impressive, keep up the good work. the video was captivating and well produced and the project was stunning.
🤯 thanks for the praise and support :)) we'll try to keep em coming!
amazing, stunning, pulled through with that tsp optimization and cartoonify.
Couldn’t have said it better myself. Well done
FRC? if so which team?
@@kyle_mk17bought to ask the same question
You guys are amazing. This was so fun to watch.... I'm quitting smoking weed and looking everywhere for long, drawn out content to distract me, and your channel has been a life saver.
I'm some random 54yr old guy sitting on a boat on the other side of the world when this popped into my feed. I just want to say that videos like these fill my heart with joy. Knowing that young, talented people are doing this kind of thing in their homes gives me faith in humanity because one day you will be in positions of power and responsibility, running our world. To see the level of dedication, enthusiasm, intrigue and fun you're having, all the while while learning, is truly inspirational. Feeding all that back to us in an entertaining video is a bonus! Good luck with your future endeavours.
Oh Jamie, is it really random? Given I build robots and AI and we are both boat people.... some dots joining.... Anyway, well said. Great storytelling here and a wonderful project to inspire others!
wow. comments like this are what let us push through the harder moments in a project - this whole comment section has been so full of support I just can't believe it.
good luck on the boat stuff mr old guy, I hope your boat adventures treat you well :)
-alex
@@brennonwilliams9181 Hi Brennon. It's a small world, even on TH-cam!
44yo, on a boat, other side of the world, enjoying this video!
THE FLIP UP LIKE THE SX-70 IS THE COLDEST THING IVE EVER SEEN
It wasn't until the last 5 minutes that i looked at the channel and saw it *didn't* have 100k subscribers. This stuff is incredible
Yeah I never even looked and when they said they had 600 subs at the end, I was completely astonished. They'll hit 100k within a couple months I bet.
Crazy how he went from 600 subs to 36k subs in 14 days!!
Others are jokingly asking "can it run Doom?" But hear me out:
Step 1: Develop a mechanism to shake/vibrate the EtchaSketch and clear the screen between drawings.
Step 2: Render tons of Doom frames on the EtchaSketch and develop an AVG time from start>>completion>reset.
Step 3: OG Doom ran at 35fps. Calculate this avg time against the frame rate, and use that number to estimate how many more models you would need to build to make this feasible. Let say you make 6 more EtchaSketches (it'll still be incredibly slow).
Step 4: Each EtchaSketch gets a camera that photographs each frame at completion. These frames will all be compiled into a final animation.
Step 5: Modify the emulator to run doom at the FPS of your multiple Etch-a-sketches.
Step 6: Develop an AI to play Doom in super slow mo.
Step 7: Begin the slowest game of Doom ever played. Additionally, prepare yourselves for the longest session of troubleshooting and monitoring you've ever experienced.
Edit: Just read the update comment. Im glad yall are working on more iterations!
If Michael Reeves stayed in school 😂
Yo chilllll😂😂😂😂
Fr though
Michael would be like "So I started out trying to make a self drawing etch a sketch, but when I opened it up I discovered the aluminum powder inside and decided to mix in iron oxide and replace the stylus with magnesium so now it's an etch a sketch that will spontaneous trigger a thermite reaction!"
@@liamfoxy every title card would be it attempting to draw a better and more detailed dick
@@liamfoxy W idea gimme 10
I wish I wasn't so dumb..but I'm an artist.
This is his wife posting on his tablet.
He's actually a genius❤
can it run doom?
Maybe
Yeah, at 60 Seconds per Frame or 1 Frame Per Minute 😂
it can surely run doom. i saw it running on actual lab cells (such a game would last a couple of centuries but still, it can run it)
graphics driver for a 1 frame per minute computer display (games, interfaces, books?, artwork, weather display, etc)
0.02 fps
Dude! I had this exact same idea for such a long time in the back of my head. I'm very glad someone did it finally, you guys did an awesome job in such a short amount of time. I cannot wait on how much this can be improved and polished with a little more time. Hope you have a great time at open sauce!
I have a funny feeling this video is about to blow up.
It definitely should. This video is awesomeeeeee
Me too. Hopefully this helps a bit
Been seeing a lot of etch a sketch stuff recently
For real
dude I said the same thing, but about our robot
Wow, from 600 to 8,000 subscribers in about 24 hours. It just speaks to the amazing quality of this video and the project. Keep making great stuff!
10.7k
26.6k now
30k 4 days after
Everyone talking about how cool the robot is(it is really cool) but can we also talk about the level of production that went into this video masterclass 👏🏼
thanks bro! you saw the real struggle hahaha
Oh I was thinking the same! 14 days to build a robot and they got the forward thinking to shoot every detail of the journey. Like there was a cine team behind.
I love the chapter title cards and the fact that the etchasketch drew each one@@EveryFlavorRobot
@@EveryFlavorRobot next project: robotic anti-roomba
Takes dust from the roomba's storage and re-distrubutes it all over the house
Every Flavor of Robot, you have done it. This is the exact type of video that made Stuff Made Here blow up and become successful in the span of a year.
Not me banging at my phone yelling " JUST FKING USE STEPPER MOTORS " 😂😂😂😂😂😂😂😂😂
True
SAME
Yea I wanted them to use steppers so bad😭😭 maybe a v2 one day
I thought I heard something.
I really wanted to address the stepper motor thing at the beginning of the video but I knew people's eyes would glaze over - had to trick them into learning about motors >:)
sorry that caused you pain tho, we all must make sacrifices and yours has not gone unnoticed
-alex
I want to show this to my animatronics students, this was an incredible watch and an amazing project!
It feels illegal to find a video this good so early
it feels illegal to have such supportive comments
Hey guys I have to say, extremely inspirational. I'm a cyber security guy but I've been diving into this stuff so much more after picking up a 3D printer and Fusion360 a few years ago. It's become my favorite hobby and you've definitely inspired me to restart some unfinished projects, also I'm sure you'll inspire many others to start their first, keep it up!
Also, @PrincessEtch
The lightning fast sketching photographer in Kung Fu Panda: "Finally a worthy opponent!"
lmaoooo I love kung fu panda
Dude the farther I get In this vid the more I hope each and every one of y’all finds success and happiness in life
stop it youre gonna make me cry ❤
coffee motor analogy is genius
I still don't understand why coffee makes me do that
Caffene@@EveryFlavorRobot
I don't like coffee so I use instrumental metal and works even better
@@aivarsgraudins8423 , caffeine amplifies the effect, but it is not the cause, because decaffeinated coffee will also make people need to go, and because there are many other caffeinated drinks out there (like soft drinks and tea) that don't make people need to go. The real cause is the gastrin hormone production that is boosted by coffee.
I love the Ale 8 One package on the wall in the background at 11:23. I grew up in KY. It's a local favorite!
Please make a video of you guys exhibiting it at the convention. I'd love to see the live reactions from everyone.
600 subs to 30k in 4 days is insane, but you guys deserve it so much. Amazing work, really.
overlaying the video of discovering your exhibitor application was accepted over top of the demos being shown is such a sweet editing choice! the full swing of both story arcs happening at the same time really lends an unexpected amount of emotional weight to both of them, incredibly inspired choice, really striking :O
you know, it was one of those editing decisions that was kind of happenstance - bc I accidentally filmed the reaction in portrait mode out of excitement
but yeah then I watched it back and knew it had to stay like that :) I can never tell if people notice the editing tho so I love that you also enjoyed it like I did while making it :))
-alex
this channel is criminally underrated
Dude this is absolutely amazing, 3 days ago I was thinking if anyone had made a robotic etch a sketch, this video will go viral. No doubt
❤I am just amazed at the support here - I thought we were just going to take a few selfies on the etch a sketch and show it to our friends hahahah
-alex
@@EveryFlavorRobot Bro I told you this was gonna go viral didn’t you like just have 660 or so subs yesterday lol that’s crazy
@@Ben...---... people who called it award:
Thanking us for 600 subs, meanwhile 3 days later you’re at 27.6K. Congratulations man, really goes to show how much your hard work, dedication, and arguable most importantly collaboration pays off. Beautiful
Production quality, storytelling, editing, amazing 👌🏼
This is unrelated but I just really love cornbread (i'm from the south)
-alex
Professional Etch A Sketch artist here - really awesome video! Below I shared my real-time thoughts as I watched the video.
At around 5:48 I was doing a lot of head-nodding lol. It's very important to emphasize that every Etch A Sketch is a unique plotter device which comes with its own particular idiosyncrasies. It's something I subconsciously accommodate with muscle memory, as I sometimes work with units that have ever-so-moderately higher tension in one knob vs the other, or there's drag which causes those spikes you visualized, etc. If you would ever like advice on which types of Etch A Sketch might provide more ideal/consistent internal mechanics for you, feel free to reach out as there are some go-to models I tend to look for as my ideal canvases. Though it seems like you've done a fair amount of programing to accommodate the idiosyncrasies of the unit you've got!
I love how violently fast this is! 🤣 frankly I'm a bit surprised that the mechanics can handle that speed. Thennn I got to 11:10 and my suspicions were confirmed 😢 As soon as I saw you starting to open that Etch A Sketch my first thought was nooooo just go buy a new one! It's not worth the time/energy it'll take to fix it! But then that got me thinking that your programming was very specifically calibrated for that unit you've been using, but then I thought, well maybe it's okay, maybe recalibrating won't be so hard with another device.
As someone who has seen a number of Arduino Etch A Sketch projects in the last 15 years, the breakthrough at 22:03 is incredible. One of my biggest visual gripes are the giant diagonal lines used to keep everything connected that detract from the image, so this is an amazing breakthrough!
Truly amazing video, I hope this Etch-A-Robot gets the accolade it deserves! 🏆
I can’t tell you how many of your videos we watched to research this!! you’re a true inspiration thanks for the wonderful comment ❤️
We’ll definitely be reaching out - our etchbot is not the happiest with us after this video…😳😳
-Jesse😎
@@EveryFlavorRobot happy to assist as your sideline etch professional! 😄
@Princessetch Do you have any specific recs for a *sturdier* etch-a-sketch? We're looking for the consistency you described, but with the same form factor as the regular model.
Unrelated...but let us know what's a good image for us to etch for ya!
-Jesse 😎
@@EveryFlavorRobot by sturdier do you mean an Etch A Sketch that is heavier, or an Etch A Sketch that can handle more rapid/repetitive control usage? Assuming the former, the current models of the Classic Etch A Sketch are the heaviest. Assuming the latter, I'm not sure if any particular model would be more robust than another as from my understanding the wiring used inside hasn't really changed significantly in the last 60 years. It might be worth trying a unit manufactured by Ohio Art (you'll see the logo on the top left) to see if the components inside hold up better. Each unit will have its own idiosyncrasies though, and one that might be of more concern to you is the "ghost lines" that compound over time. Newer units tend to be less problematic in that regard than old ones, as the stylus in newer units is made of plastic and probably doesn't leave as deep a mark on the underside of the glass as older units that have a metal stylus. One bonus of older Ohio Art units is that the knobs are MUCH more easily removable. Feel free to email me (jane [at] princessetch [dot] com) and I can share exterior photos of various models over the years to showcase differences, which might guide you in determining what units might benefit you the most.
Your offer for an image to etch for me is most certainly kind! Being that I'm Princess Etch I'd love to see a crown rendered on your robot. As for the level of detail/photorealism, I'll leave that to your discretion 👑☺️
I was alive when the etch a sketch was a brand new toy. Every kids fantasy is to make this toy draw a good picture. Ne er dreamed this would happen when I was kid. I guess if you live long enough...you really do get to see everything. I just did. Well done dudes.
You guys are friggin talented. To do this in 2 weeks is absolutely insane, and to make such an entertaining video is the cherry on top. Can't wait to see it in San Fran!
thank you for being one of the few youtubers brave enough and willing to use non-stepper motors. They are so overused. This is probably an ideal use case for steppers, but I feel like so many totally use steppers when regular motors are more called for. So this was a breath of fresh air!
I appreciate this comment :) so many people are raving about how we didn't use steppers and I guess the coffee analogy went over their heads - the point was a challenge and a spectacle! Otherwise it would have been one of a thousand boring old stepper motor etch a sketches 😝
What you need to do is... a video! I mean, you need to build a version of the robot that can erase itself, and have it draw each frame, take a photo of the frame, erase, and repeat. It could probably render a 10-minute video in a week.
oh boi. trust me. we want this and it frequently surfaces in our meetings >:)
-alex
@@EveryFlavorRobot play bad apple on the etch a sketch if you get that working
that would be awesome. sounds like they just need some extra code hooked up to whatever clears it. one that connects to a camera and increase the accuracy and they have it working!
Kudos on the design. I'm 40yrs old now & remember what this design resembles!
*Instant Cameras such as the Polaroid* were quite popular for a while. They all had that classic *'Pop-up'* feature. Popping it open to expose the camera & printer shoot.
*So for clarity. We went from Instant Print to digital cameras. Now,because they could & wanted to,we have 'Instant Draw Cameras'!* Nice job y'all!!!*
Hell yeah, a new creator channel!
Absolutely captivating video, can't wait to see more!
Thanks!! Ur work is really cool btw
This is awesome! And the fact that it's designed to look like an SX-70 took it to a whole new level for me.
I knew people would notice :)) Tom is a phenomenal designer, I'm so glad he made it look so good
-alex
I don't know, but am glad that this turned up in my feed. With everything that is going on, it's awesome to see the humor, friendship, drive, and a positive way forward.
Actually wild that you’ve got this level of production value and you’re not bigger
Damn this was sitting in my feed for 2 days, why did I wait?? Awesome stuff guys, really fun to watch.
I was sub-1000 subs. People won't be able to say that for long. Well done, lads.
Twelve hours later and I'm joining in the 6,500s. Looking forward to the journey!
ur a legend for that 😤
Another day later and we're at almost 18k :)
@@aL3891_ over 18k now
I'd love to see the robot connected to an open Etch a Scetch so we can see the arms and string moving like crazy.
I just refreshed the page a couple hours after I saw this video and was shocked to see the crazy sub count increase
Congrats on 12k, you deserve it
Edit: 12K?!
It's now 27K
@@EmmetCromie The original comment was on 2K 💀I had to edit it up to 12k but I've realized that I just can't keep up.
@@evan_roos4569 Why did you edit it up to12K if you kept the time the same at 2 hours?
This is beautiful. I'm an amateur mathematician and roboticist (and planetary scientist), but it seemed to me the motors were way too fast right from the start. I'm glad you sought to slow them greatly. If it's good enough for your Mom, it's good enough for me. I subscribed immediately. Well done!
I do hope you guys get a viral hit soon, it'd be well deserved.
maybe then we could afford some stepper motors 👀 thanks for the support! You can say you knew us before it was cool
@@EveryFlavorRobot Too broke to add financial support but this was sick I'm showing my friends!
@@EveryFlavorRobot Hey looks like this one gave you a big jump of subs =D I'm one of them lmao
I'm not an engineer. I break everything I try to fix. But even I was wondering why you had the etch a sketch inputs at such a wildly fast speed! Great video, I'm very impressed. I broke my etch a sketch to see what was inside in 1978!
GOOD YT ALGORITHM. this is a great video, subbed :)
It's the Etch from Toy Story!
Now need to have it voice activated with ChatGPT.
I said "Just use stepper motors and run it like a CNC machine." Before watching the video, and lo and behold.
Great job, I'd love to see a V2 with a bit more time.
Seeing such a clever use of AI is very refreshing, things like this that couldn't have been done otherwise really highlight the technology's potential
when i started watching i thought you had like 1m subs, content has that much quality, shocked when saw it is only 1k. hope more people sees this video and blows up. keep it up!
1M subs is unfathomable to my smol monkey brain so I will not think,
but I will keep making robots go brrr
-alex
It now had 27K only 2 days later
I got this feeling I'm about to see a lot more of this channel
Wow what a sick robot and video! Though I think we all know where the true talent is... @2:25
Seriously though the production quality of this video is next-level
Ben freed is about to be a household name 🤠
You guys are going to be a big name on TH-cam. Your production value, robotics, and personalities are going to take you very far. I look forward to seeing what you guys have in store for us in the future. Needless to say, I subbed.
How is this channel so underrated??? Immediate subscribe
Definately subscribing and joining the discord, the idea and robot is incredible and I love the video editing I can't wait for more videos.
I would love to see a version of this play bad apple. If it had an automatic rest function it would just be beautiful, even if it took an hour I would sit and watch it.
wait what is bad apple? enlighten me
-alex
@EveryFlavorRobot it's a music video that is known for being played on lots of displays (and "displays"), similar to DOOM. Just google it and you'll see. I believe you'd need a vibration motor or similar to clear it after each frame to get it to automatically play the video
@@EveryFlavorRobot I posted a comment explaining it but it seems youtube deleted it? Anyways: It’s a music video that is commonly used to demonstrate unusual forms of video playback due to it only using black and white. The video itself has a long and complicated backstory, as it is a video for a fan cover of a game theme from an old Japanese game for the pc98. The video was made in MMD. Just google bad apple, it has a ton of views!
"If the motors wanna go fast, let's let them go fast!"
Best explanation for gearing I've ever heard
They yearn for speed
ONLY 771 SUBS?!??!?!?! WAY UNDERATED. remember me when ur famouse
i'll never forget you BasementStudi0s
@@EveryFlavorRobot yessssssss
The water bottle analogy made my brain learn something. Good job!
Heck yeah, smashing success 😎😎😎
this is absolutely hallarious i thought yall would have a million subs 😭
Wow, that's a really good video for a channel that was just 600 subs big, you really deserve the hype!
Really glad I was directed to this video. About to go to college for robotics and it’s cool to see this kind of process. Graduating FRC member. Go team 8808
Video goes up 11 hours ago.
Video states that they recently hit 600 subscribers.
Check subscriber count.
1,100 subscribers. Talk about a blowup holy cow.
check it again now!
Today was my university exam and I had TSP (Travelling Salesman Problem) in my syllabus! I was so hyped when i was studying about it and voila I can see it being used practically kudos man nice content!
I love your videos! You guys are very under rated for the quality of videos you guys make. I hope you guys the best. God Bless
So glad the algorithm did it's thing! You're already at 30k subs and I'm incredibly happy to be one of them!
Can't wait to see your future projects. And congrats bro, you did it!!
This is a really cool project, and a great video to boot
Well done!
thanks! We worked really hard on it :) Also, nice to see a fellow Alex 😎
11:19 Thanks for the shout out at minute 13! ❤
Of course! If only I found your video BEFORE i spent half an hour dremeling it apart! hahaha
got whiplash finding u guys only had 600 subs, you've definitely just gained one more!
At first, I wasn't sure but your collective enthusiasm, laughter, and determination made me stay for the entire video! You guys rock!! I can't wait to see what else you come up with. Outfitting this Etch-A-Sketch with a camera/computer vision so that it can draw what it sees, would be absolutely killer!! Best of luck to you all! BTW, I had an Etch-A-Sketch in the early 1950s...yes, I'm an old dude but still in love with Tech!! Cheers!
This is seriously amazing!!! I wish I was going to opensauce if only to see y'all!
Thanks!!! If only it wasn't so far away hahaha
First time I've seen any of your stuff, instantly earned my subscription. Now it's time to binge the rest of what you've done.
Oh 😳 no not the old videos... they are so awk (I'm still learning!) Go easy on me hahaha
-alex
Congrats on getting into Open Sauce! I hope you get to hang out with lots of other robotics TH-camrs! Great project and great video - it's great to see the progression and how you overcame the engineering problems. Making a video of it all must make it even harder!
thanks! We've been meeting a few through the open sauce discord and I'm already so excited. Its crazy how engineering problems almost naturally follow the story arc people are used to finding in media! Something about being excited to do stuff and then it blowing up in your face idk
-alex
8:16
This made me chuckle inaudibly, but visibly.
Me too... Me too
Absolutely awesome project its incredible how that thing actually works so good at such high speeds too- The amount of work that went into it really shows! (Great excuse to use the CO2 laser for the acrylic panels! it makes it look so much more clean and mesmerizing!)
Absolutely criminal that you do not have more subscribers and recognition for all the work and passion put into these projects!
Really loved the "this is fine" demo it just looked like everything was melting and was very silly
The amount of accuracy you were able to get from drone motors is crazy
youre a real one for noticing this hahaha we were shocked
Absolutely amazing and incredibly underated
Dude the cinematography of this video is amazing! And it's not even the subject! Skilllllss
This is incredible! All of it, the idea, the execution, the humor, the editing. An easy subscribe, can't wait to see more!
You’re actually so good at editing and crafting a story
Very cool and professional project and video
This video was awesome! so glad it showed up in my recommended. The production value was insane, has that Michael Storen feel to it but I have to say - I enjoyed this more!
Okay, this project is really awesome, great solutions! Also, great video!
I clicked for the idea. Stayed for the result. Subbed for more.
Wow this is amazing
you deserve WAY more subscribers!
Wtf how did you go from 600 to 11k in ONE VIDEO??? Thats absolutely incredible!
underrated channel!
I knew a kid in highschool that could make anything on an etch a sketch every day he made a piece of art and the library hung the damn thing on the wall Every morning. He made faces and cars and houses and animals and all sorts a shit. Honestly the most impressive thing I’ve seen to this day
Amazinf video guys, you will make it big! Keep the videos coming!
holy cow yall went to 600 to almost ten thousand subscribers?! in just one video?!!?? thats insanity. congratulations! it was well earned. cant wait to see yall at OS2024!
You guys are freaking amazing!
Instant subscribe after I seen it drawing in the opening. This is so crazy impressive very reminiscent of when I stumbled on will years ago. A silly concept but an outrageous amount of understanding and effort put into it good for yall.
This is freaking awesome