You know that sound old heavy wooden doors make when you open them? Loud creeking, moaning sound....that's the sound these guys back make after hours of being bent over like that, much respect to all Rodbusters.
Yes sir my daddy was a ironworker for 35 years he passed away in 2010 but growing up he'd give me $20 to give him rub down I charged him a dollar a minute 😂 he'd say damn girl you're tough... That's highway robbery😂😂 But he always paid up. Because I put in that work, I was wore out by the time I was done. He liked to be killed. He said come on girl you ain't going to hurt me😂😂 Damn I miss that man. They don't make them like that anymore 💯
Nah it's the brickies that truly have it rough, those blokes are on another level Besa block brickies usually btw, nothing too tough about your urban house brickies, watch the blokes throw massive cinder blocks around one handed all day and you'll learn a slice about life
@@dylanwood4164 Hmm how much does block weigh (55 pounds max for besser)? How much does a number 10 or 11 piece of rebar weigh (10 pounds per foot normally in 8 to 24 foot bars) so 80 to 240 pounds. Yes in residential the rod busters have it easier, BUT when placing rebar in the foundation of say a poured in place High Rise building or a Bridge, yeah it's not even close brother ;-)
@@whitey22222 i just finished a job that had about 60 6m cages with 8, 28 ml bars per cage, i know steel can be fucked and theres always a bigger and harder job somewhere out there, ill stick to playing in mud thanks haha
I would beat them using triple wired quad saddle 8s with my eyes closed. Lol. JK. 12 years of this and I developed carpal tunnel. Very painful. It was good while it lasted.
I cut and bend rebar, I always wondered what happened after the fact. I thought my job was hard until I saw this video. But we do sell re bar tying guns at our facility that can tie up a piece of rebar in half the time. I showed it off to some rod busters that came through and they've never looked back. Well worth the investment and less carpal tunnel.
Rebar tie guns make what kind of tie? A snap tie only as far as the ones I have seen, they are great when that is all you need but in many circumstances you need a different tie like a figure 8 or a saddle or either one of those with a wrap, or any of the above in double wire, hence unless the work your are doing is all snap ties they are useless, not to mention when many of the tie machines were brought out to demo on the job I was able to out run them! I will concede that is not the norm, but I am a 4th generation master iron worker with over 16 years in the rod patch and many more as supervision, building poured in place high rise buildings, tilt panel buildings and bridges among other things (-;
@@whitey22222 yes only snap ties, but I'd recommend the Max twin tier it doubles up but yes it only does snap ties, but a lot of youngins coming into the field don't have the experience you do, and they certainly will be slower without the guns. Much respect to you though, it's definitely not a job for everybody.
@@whitey22222 that’s what I thought too but if you watch the guy in the high vis shirt he only does a single loop tie. So the tie gun would work fine here. We always have to saddle tie though
Yeah, i prefer using knippers too. I like te leverage they give and the shape of the head which lets me easily tighten the knot if i need a sturdier connection.
I am a Hong Kong Ironworker It's very interesting to see a different way to tie to wire Coz, normally the wire are seperated from the wire round, and which is cut as 16 inches for each wire The other thing is, we dont use the pliers, we use a hook/goose to tie the iron Wanna try this way Once i get to Canada 🤞🏻
@@midwestoenr4905 if you have to ask your not a rodbuster your just a buster 🤣🤣 Commenting on every rod page two months in the patch. Noise up bud id fucking bury you.
@@dapro2524 yeah i know brother...i tried texas,wisconsin,,florida,south carolina but low pay i came back to cali here in 2 months i make more than what i was making in those states in the whole year plus not alot work during winter here in the bay area all yeah making 2500 hundred plus a week
Those are not snap ties, they're called Tabb Ties. I created that. My name. lol nobody tied rods from the left side intersection. I started that back in 1999. My company was called Unity 4 construction. I was thee fastest rod tier in Western PA. Nobody could touch me because of that tie. lol great work gentlemen.
Wait what, you renamed a tie after yourself because you had never seen someone make a snap tie from either side of the intersection before? There is an actual a reason to do this, and it was being done BEFORE I started in rebar in the early 90's, You snap from bothsides alternating to help stop the mat from racking just like using a saddle but for fill ins, like say when you are filling in ties on a wall mat tied on the ground and then flown by crane into position LOL! Hillarious!
@@whitey22222 Dude hold your damn shorts I was fuckin with you. I used to say that to the guys because I’d always out tie everybody with that reverse tie. lol I also started back in 89. And I agree, Ain't none of that shit new. Everything has been done the same way since rod-busting started. keep pushing bro
Double snap for what? So unnecessary if it holds the bar in place thats all the tie is there for it serves. The tie wire serves no purpose. Once concrete is poured
@@uranga1981 i wouldnt, you are totally right and im totally wrong. Im sorry i stepped into your world my gosh it must be so hard to be a rodbuster i cant even imagine having to punk bar all day and learn all these complex ties and oh my god the heights! I couldnt imagine
@@steeltown416 would love to race ya mate, be a good bit of fun seeing how y'all do everything differently Even screeding is done in a different way to what you guys do
Because thats for beginners and you have to learn to tie... we uave to tie saddle ties, figure 8 ties its a lot more than this plus the guns wont get in tight areas... but most importantly a real journeyman can toe faster and tighter than that gun
They would be faster if they took their index finger out from in between their pliers most of your strength in your hand is in that first finger and control
It's a hurry due to the bids. We get bad rates so we have to hurry the fuck up to meet are goals. Quality is still there we just need better rates. Some jobs want a single man to place tons of steel in a single day. Its stressful sometimes at the expense of our bodies.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | ครอบครัวสะท้านทุ่ง "นางบี & อ้ายสติ๊ก"](http://i.ytimg.com/vi/A1rhYcxxNtA/mqdefault.jpg)
You know that sound old heavy wooden doors make when you open them? Loud creeking, moaning sound....that's the sound these guys back make after hours of being bent over like that, much respect to all Rodbusters.
Certain way you bend over too keep your back straight
Yes sir my daddy was a ironworker for 35 years he passed away in 2010 but growing up he'd give me $20 to give him rub down I charged him a dollar a minute 😂 he'd say damn girl you're tough... That's highway robbery😂😂 But he always paid up. Because I put in that work, I was wore out by the time I was done. He liked to be killed. He said come on girl you ain't going to hurt me😂😂
Damn I miss that man. They don't make them like that anymore 💯
They say we concrete guys work the hardest but I have mad respect for rod busters. That’s a crazy amount of bar
Nah it's the brickies that truly have it rough, those blokes are on another level
Besa block brickies usually btw, nothing too tough about your urban house brickies, watch the blokes throw massive cinder blocks around one handed all day and you'll learn a slice about life
It's harder laying block all day especially when time to groud the walls
@@dylanwood4164 Hmm how much does block weigh (55 pounds max for besser)? How much does a number 10 or 11 piece of rebar weigh (10 pounds per foot normally in 8 to 24 foot bars) so 80 to 240 pounds. Yes in residential the rod busters have it easier, BUT when placing rebar in the foundation of say a poured in place High Rise building or a Bridge, yeah it's not even close brother ;-)
@@whitey22222 i just finished a job that had about 60 6m cages with 8, 28 ml bars per cage, i know steel can be fucked and theres always a bigger and harder job somewhere out there, ill stick to playing in mud thanks haha
@@dylanwood4164 It's all good I have respect for all the trades, we all bear some burden of making usefull things out of a pile of materials.
Forget who is faster... both are great workers..mass production with 2 hard working gentlemen 👏👏...
Watching this is giving me back pain memories of tying steel for a slab ... I can feel the needles in my spine
After a couple hours bent over tieing I can't wait to stand upright and tote steel
Just my favorite thing in life. Lmao
Chiropractor appointment needed after few months of this.
Yuup even for a lil 10 x 10 square back will be sore
On God! Bending over tieing rebar all day SUCKS
Gotta invest in kneepad’s best decision ever
It doesn’t matter when you have a passion for beaing a badass
Lol dude you are not lying 😂 but it pays the bills
My father was in Ironworkers Local 58 and New Orleans Louisiana 43 years
I would beat them using triple wired quad saddle 8s with my eyes closed. Lol. JK. 12 years of this and I developed carpal tunnel. Very painful. It was good while it lasted.
12 years? My respects.
@Ace deuce keep doing this type of work and youll see
@@obeycastle2547 I’m an estimator and have the same symptoms
@@takeoffready6218 stop intaking anything that forms yeast. Bread, beer, alcohol, sugar. For 2 weeks, and then reply back to me. See how things go
@@obeycastle2547 perfect thank you . I’m a sugar addict especially when I’m under stress
The only winner is the boss that pays u. U get paid by the hr lol
And my family who i support by doing something similar.
And boss man got a family to feed too
It's called Pride, work for your spot that's how you come back. Everyone wins, get to the next job.
@@viktorsubic2139not for much longer with that back!
@@lottsaquatics4385get out from under the table bud
Love the hard hat xD
You guys are bad ass , coming from Carpenters Union 409 Los Angeles California
Idky this is in my recommended but imagine these guys ONLY tying off sutures, they’d be the guys I need in my unit🥰
my back hurts from watching this
I love the shoe laces... Mason line
I now remember why respect this job so much, hard pressed to find a job harder then rob busting
I cut and bend rebar, I always wondered what happened after the fact. I thought my job was hard until I saw this video. But we do sell re bar tying guns at our facility that can tie up a piece of rebar in half the time. I showed it off to some rod busters that came through and they've never looked back. Well worth the investment and less carpal tunnel.
Rebar tie guns make what kind of tie? A snap tie only as far as the ones I have seen, they are great when that is all you need but in many circumstances you need a different tie like a figure 8 or a saddle or either one of those with a wrap, or any of the above in double wire, hence unless the work your are doing is all snap ties they are useless, not to mention when many of the tie machines were brought out to demo on the job I was able to out run them! I will concede that is not the norm, but I am a 4th generation master iron worker with over 16 years in the rod patch and many more as supervision, building poured in place high rise buildings, tilt panel buildings and bridges among other things (-;
@@whitey22222 yes only snap ties, but I'd recommend the Max twin tier it doubles up but yes it only does snap ties, but a lot of youngins coming into the field don't have the experience you do, and they certainly will be slower without the guns. Much respect to you though, it's definitely not a job for everybody.
@@whitey22222 that’s what I thought too but if you watch the guy in the high vis shirt he only does a single loop tie. So the tie gun would work fine here. We always have to saddle tie though
I did this for years in NYC. I used knippers not pliers though. I loved the job. Very sporadic though as far as job stability.
Yeah, i prefer using knippers too. I like te leverage they give and the shape of the head which lets me easily tighten the knot if i need a sturdier connection.
In California Local 416, we stay busy almost Year round, 100k a year. Kinppers? Pliers out here in the West. I've never seen anyone tie with Knippers.
I’m local 11 north jersey. Lacol 46 nyc uses the knippers. Most of us in jersey use pliers.
I am a Hong Kong Ironworker
It's very interesting to see a different way to tie to wire
Coz, normally the wire are seperated from the wire round, and which is cut as 16 inches for each wire
The other thing is, we dont use the pliers, we use a hook/goose to tie the iron
Wanna try this way Once i get to Canada 🤞🏻
Look up re bar tying guns, they are expensive but save you half the time when you have a big job like this.
my coworker and i talked about this, how the west uses pliers and the east uses hook goose.
Everyone uses pliers out here, youll get laughed off a site if you plan to use a gun lol
@@Wargy16 why
@@midwestoenr4905 if you have to ask your not a rodbuster your just a buster 🤣🤣
Commenting on every rod page two months in the patch. Noise up bud id fucking bury you.
You guys get away with only one loop? Luuucky!!
멋진영상잘보고 응원할게요
so solid they could have missed four or five in a pattern,
Respect
Those ties won’t hold
Hope those ties hold
W Polsce wiążemy cęgami i przyznam,że z podobna prędkością,ale jednak troszkę szybciej od 20 do 30 wiązań na minutę.
Brawo Ty o gratulacje
Tan bien pavas puros guangos
Lentooooooos
F me I thought bricklaying was hard on ya back
I do this with my cousins at work installing the carpet in the schools in las vegas
Cool story bro
@@discotrain173 thanks alot bro
The only jobs where a set or kleins and a lot of shitty days gets you $30/hour
in california 50+ an hr
@@octaviocali4697 its becuase cost of living is high in cali
@@dapro2524 yeah i know brother...i tried texas,wisconsin,,florida,south carolina but low pay i came back to cali here in 2 months i make more than what i was making in those states in the whole year plus not alot work during winter here in the bay area all yeah making 2500 hundred plus a week
@@octaviocali4697 not right off the bat, I know Cali union but how much do they pay rod busters starting
@@chevyboyzz4996 first period 21.73 hr anf 8th period 39.43 and hr as an apprentice
Those are not snap ties, they're called Tabb Ties. I created that. My name. lol nobody tied rods from the left side intersection. I started that back in 1999. My company was called Unity 4 construction. I was thee fastest rod tier in Western PA. Nobody could touch me because of that tie. lol great work gentlemen.
Wait what, you renamed a tie after yourself because you had never seen someone make a snap tie from either side of the intersection before? There is an actual a reason to do this, and it was being done BEFORE I started in rebar in the early 90's, You snap from bothsides alternating to help stop the mat from racking just like using a saddle but for fill ins, like say when you are filling in ties on a wall mat tied on the ground and then flown by crane into position LOL! Hillarious!
@@whitey22222 Dude hold your damn shorts I was fuckin with you. I used to say that to the guys because I’d always out tie everybody with that reverse tie. lol I also started back in 89. And I agree, Ain't none of that shit new. Everything has been done the same way since rod-busting started. keep pushing bro
I own a Red Bridge in Frisco and have a ox named Blue!! Great story brother, how big was that fish you caught again?
@@whitey22222 u can go from left side then from right side on every other to help rocking too.
I never heard of tabb ties. I just started from the left because it feels like i can tie the rebar faster that way
Muy lentos los compas
Siempre ahi un enviedoso vales verga tu
What they are slow i tie an make hook with you noticing
Saludos a todos los enfierradores desde chile
good job friends
It would suck if your tools fell 😂 ain’t getting them back lol
There is a Drill bit looking tool that ties wire now.
Always faster when you don’t heel your shit.😂
Jajaja jajaja
What pliers are those?
Ayy brohh quick question was this the sasol job in Westlake LA ? I'm just seeing this
There is a special tool for this
When we were tying a slab my old Foreman told us all he wanted to see were asses and elbows! No standing up until you got to the end of your row.
My goal is to be in the union as a ROD BUSTER
It should have been a double wire snap tie at least👍🏽
Andy it’s held by gravity you idiot, double snaps are for bitches
Kent Lawrence you’re an idiot lol...I was a rodbuster for 10 years haha I know what I’m talking about
Double snap for what? So unnecessary if it holds the bar in place thats all the tie is there for it serves. The tie wire serves no purpose. Once concrete is poured
nik c you wouldn’t understand a Rodbuster competing in a tie race
@@uranga1981 i wouldnt, you are totally right and im totally wrong. Im sorry i stepped into your world my gosh it must be so hard to be a rodbuster i cant even imagine having to punk bar all day and learn all these complex ties and oh my god the heights! I couldnt imagine
What rod was use for this project
Is it 16mm?
30mm
Was that in slomo weak and slow 🐌
Ahhhhh I don’t miss it!
Broh is that Juan trejo
Me puede decir alguien la marca de los alicates con los que atan la ferralla?
Klein tools
You’re gonna work yourselves right out of a job, boys lol
😂😂😂😂
La increase corraann
日本の鉄筋屋が使っている「ハッカー」と言う道具を教えてあげたい。
Wtf are those tools they're using? Couldn't imagine anything other than a good long set of nips being good for tying steel
Klein pliers, that's the only thing we use in Sunny California, making 100k tying Rods!! Local 416 Ironworkers!!
@@steeltown416 would love to race ya mate, be a good bit of fun seeing how y'all do everything differently
Even screeding is done in a different way to what you guys do
@@dylanwood4164 that would be cool, well it's Friday cheers 🍻!!
Such quick ties are loose as fuck
Single tie extra slow..
Westlake?
Ganó la compañía..
1/4 twist?
Try tying more than one bar...
Should be doubles
How much an hour?
Pero atan como la gente o queda todo flojo y con sobrantes de alambre.
ЗА ОДИН МИНУТ Я С КУСАЧКА 26 РАЗ ПРИВЯЗВАЛ ВАМ ИЩО СЛАБО РЕБЯТА
결속선 뺑뺑이가 없내요
If you drop your pliers I guess your fired
I thought bricklaying was back breaking work but this is worse
😂
Everybody pray for their backs
4 pulgadas de cuadro ,demasiado amarre ,
Epa muy lento ? En Colombia nos nosotros amaramos con bichiro y pura pate gallina k da muy bueno y más rápido están muy lentos?!
Just use a rebar tying machine that does that job in 0.25 seconds.... Jesus christ this is third world stuff
Money ?
If you think thats tied than you are not for this business :D
Demaciado lentos y llevan sólo una línea, si es posible agarren 6 líneas y amarran 50 %
I counted 19 ties blue face 20 ties guero
Empinensen mas chicos, muy lento
Thats weak!! Youre only tying one bar. Its more complex having to tie fifty percent or even thirty
It’s really not that hard to tie 50 or 30 percent bud
100% tie on anything is more of a pain in the ass, you cover more sq ft doing 50%
Это же не так быстро
T
Why so fast? All they going to do is give u another job. I’m sure this is hourly lol
I ain't no real rodbuster but single snap tie is garbage, I've use a saddle tie or a figure 8 tie for shit small than that size diameter bar.
Yep you aint a rodbuster, that's for sure. Saddles and fig8's are for walls and columns, not top steel.
@user-fd4es4sv7c and yur work is most likely garbage lol
@user-fd4es4sv7c yur one dimensional buddy there more to life than sniffing assholes I'm more than likely be able beat at yur job buddy...
Why don’t they have the Milwaukee tool that does this in seconds?
They do have tools that tie automatically and really fast for a few grand
Because thats for beginners and you have to learn to tie... we uave to tie saddle ties, figure 8 ties its a lot more than this plus the guns wont get in tight areas... but most importantly a real journeyman can toe faster and tighter than that gun
Mexicans tie 3 by the time he’s done w one
Stay in school.
If there recoil is broken then i understand why they holding the pliers wrong if not these guys are noobs
🙏🙏🙏👍👍👍
what a nice way to waste his lifetime...
This is why we don't hire rod Buster's. We do our own rebar before we pour concrete. Double tie or nothing
You and your crew just need to learn how to walk on rebar fool. Always the top bar you’ll never break ties
And that's all ther going to do for the whole day .thats y they take years to finish a small section.🤣🤣🤣
Están lentos esos amaradores
They would be faster if they took their index finger out from in between their pliers most of your strength in your hand is in that first finger and control
Is this trye
Hate rebar
America has no quality anymore always just a hurry and cost more🤔
It's a hurry due to the bids. We get bad rates so we have to hurry the fuck up to meet are goals. Quality is still there we just need better rates. Some jobs want a single man to place tons of steel in a single day. Its stressful sometimes at the expense of our bodies.
No fast
jeieluis Flow you slow 2 homie. I’ve seen your videos. U ain’t fast at all.
Too slow
Slow as fuck bro
Очень медленно, Я в два раза быстрее вяжут арматурру
Disgusting
Vaya mierda de amarres
Too Fucking Slow