BIG BROKEN BULLDOZER! HASN'T PUSHED Dirt since the 90's

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ธ.ค. 2024

ความคิดเห็น • 393

  • @HamiltonvilleFarm
    @HamiltonvilleFarm  ปีที่แล้ว +13

    ▶️Watch us crank a backhoe here:th-cam.com/video/7hK2kSgZud4/w-d-xo.html
    💰SCHOLARSHIP LINK: bold.org/funds/hamiltonville-farm-scholarship-fund/

    • @tommiedaniels6436
      @tommiedaniels6436 ปีที่แล้ว +1

      Biz Markie Hank.

    • @808gamer4
      @808gamer4 ปีที่แล้ว

      Thank you for the awesome video hank watching from Hawaii

    • @carlbarstow4597
      @carlbarstow4597 ปีที่แล้ว

      it's tireing watching bad battereys an starters . That you spend a hour on. and shut down hank singing thats getting old🤐

    • @482ddd
      @482ddd ปีที่แล้ว

      Donated to the fund.

    • @KurtRiese
      @KurtRiese 9 หลายเดือนก่อน

      Smooth operator was sung by sade shaday!

  • @ralfie8801
    @ralfie8801 ปีที่แล้ว +41

    Hey Hank,
    Instead of messing with those little batteries all the time, why don’t you make a set of heavy jumper cables about 25 ft long out of 1/0 or 2/0 welding lead. Put a quick disconnect on one end and heavy clamps on the other.
    Then build a jump pack out of two 4D size batteries and mount that in the bed or one of the side boxes on your truck. Run more cables on your truck to the front bumper with the corresponding quick connects for your jumper cables. Rig the truck cables one set each for 12 and 24 volts.
    Then use the truck’s charging system to keep the batteries charged when you’re going to and from your projects.
    The good part is all you need to carry around those machines is one end of a set of jumper cables.
    I worked at a construction job that had several mechanic trucks rigged up this way and they worked great.

    • @carrollfranklin9807
      @carrollfranklin9807 ปีที่แล้ว +1

      Thought same thing!!!!

    • @lwwarren
      @lwwarren ปีที่แล้ว +1

      That's exactly the setup I made for my receiver hitch mounted 12k winch. Ran 1/0 cable from the battery to the rear bumper with quick connects. Put quick connects on the winch.
      Then I installed a front bumper receiver hitch so I could mount the winch on the front with a quick connect in the bumper.
      Then I realized I could use this for jumper cables and I built 30' jumper leads with quick connects. Then I realized I could use it for my HV compressor so I added a quick connect to it. Every time I think of a new accessory I think about how I can convert it to use my quick connections.
      I'm looking at adding a DC Stick welder interface so I can do mobile repairs as well.
      I'll never have to open the hood on a recovery again.

    • @ralfie8801
      @ralfie8801 ปีที่แล้ว

      @@lwwarren
      So do you have the Warn winch that came set up with the receiver hitch cradle and the quick connect wiring? My Dad has all of that on his truck and the Warn front receiver hitch too.

    • @0l0dom40l0
      @0l0dom40l0 11 หลายเดือนก่อน +4

      Absolutely, I've stopped watching the channel because of all the messing around with the batteries. Every video is the same....20 minutes with them dicking about with vice grips and battery cables!

    • @bucktis9
      @bucktis9 11 หลายเดือนก่อน +1

      ​@@0l0dom40l0 he hehehehehe and marvel mystery oil lol!

  • @billbray5995
    @billbray5995 ปีที่แล้ว +11

    Just listening to Y'alls BSing each other is always worth the watch. This is the first dozer I ever got to operate and its still in the neighbors barn that recently passed away.

  • @richardedwards3354
    @richardedwards3354 ปีที่แล้ว +19

    I worked on these brand new,the blade is a bull blade with tilt assist ram.This model 16 did come out in the mid 60,s and they were about 3 tons heavier than their predecessors,they were a powerful and agile machine,here in they were used in forestry and general earth works
    I love your blog, its just me all over,wish I could be there.

  • @jtapper6109
    @jtapper6109 8 หลายเดือนก่อน +1

    Sometimes the injector pump can leak into the engine crank case through the shaft seals and cause the oil level to rise. At least it happened to my JD 350c (1978).

  • @williambradley8018
    @williambradley8018 ปีที่แล้ว +1

    I just love watching ya ll work on old machines. At the ripe ol age of five I got to help my dad get a dragline in a feild running, it wZ a old busyrus. At the age of 10 he put me on a international dozer pushin dirt at a landfill. Yall remind me of him.

  • @dougvanausdal3162
    @dougvanausdal3162 ปีที่แล้ว +3

    Hay guys it's fun going out and playing with this old equipment and getting them running again, and as long as you are having fun and talking about all the things you do and have done , maybe some of the young people will learn something, most of the young people today depend on their computer to tell them what to do, ( LOL)
    But for me it's just fun to listen and watch you guys do your best to get stuff running

    • @TysonWhite-r8n
      @TysonWhite-r8n 10 หลายเดือนก่อน

      you kinda need something to watch them on so you cant say much cause your depending on whatever your watching on to be able to watch them so shush

    • @barryedwards1336
      @barryedwards1336 4 หลายเดือนก่อน

      The only thing the young people will learn from these two is. Don't watch them!

  • @josephviste8065
    @josephviste8065 ปีที่แล้ว +9

    My grandpa owned a Allis Chalmers farm tractor and I think it was sitting for 20 years or so and it started up without any issues whatsoever which I was surprised about it but when I was a kid I use to sit on his lap to try driving it with him but now I'm 34 and he's long gone now due to Parkinson's that he had and I really miss him. God rest his soul.

    • @KurtRiese
      @KurtRiese 9 หลายเดือนก่อน

      Deedle dee and deedle dumb

  • @AJR1918
    @AJR1918 ปีที่แล้ว +3

    I like the fact that you take older equipment and get them up and running again. I want to do this eventually.

  • @rosedad4life688
    @rosedad4life688 ปีที่แล้ว +4

    Allis-Chalmers used and then purchased engines from Buda Engine Company, which started in Buda, Il. Which is where my family is from and we still have a farm there.

  • @raymondlabonte5089
    @raymondlabonte5089 ปีที่แล้ว +11

    Hey guys, for those tight spots get yourself some various length extensions and some swivel sockets they work great , also pick up a short handle ratchet

    • @jeeperzcreeperzz
      @jeeperzcreeperzz ปีที่แล้ว

      Duhhh

    • @matthewcaldwell8057
      @matthewcaldwell8057 ปีที่แล้ว

      I agree and might add that the swivle extensions can also be a trick up the sleeve

    • @anthonyking4387
      @anthonyking4387 11 หลายเดือนก่อน +1

      If he had used a pull handle & worked those bolts back & forth he wouldnt of rung any of them off like its a throw away! Plus he wouldnt of gotten any stuck in the sockets to take 15 mins getting them out! I want be watching many more of these!

  • @jameshowell7136
    @jameshowell7136 5 หลายเดือนก่อน

    I was born in Long Beach,California ...moved to the East coast and spent 3 wonderful years in Illinois.Moved back to California in 1968 & live in San Diego...great weather but high taxes + the worse Governor in all USA! Hank thank you for your service.

  • @RayCoats-vw7vo
    @RayCoats-vw7vo ปีที่แล้ว +4

    Thank you for your service to our country sir

  • @gordoncade2233
    @gordoncade2233 9 หลายเดือนก่อน

    That’s cool as heck. My dad bought one we had on the farm growing up. That machine was a beast digging big rocks and pushing trees over.

  • @wilmamcdermott3065
    @wilmamcdermott3065 ปีที่แล้ว +8

    I worked on one for my boss as a mechanic did final drives undercarriage torque converter steering pump motor rebuilds ! Then I used it on my property

  • @jamespevey4382
    @jamespevey4382 ปีที่แล้ว +2

    Back in the mid 90’s my grandfather and I completely restored a 1969 HD11 Allis Chalmer. It was cable driven.

    • @wes11bravo
      @wes11bravo ปีที่แล้ว +1

      I'll bet your granddad loved every minute of wrenching on that old beast with you, James. I'm certain he felt pride as you learned things he taught, doing them without him having to ask after awhile. And I also bet that whole project was the source of good memories that you have til this day. Thanks for sharing, brother.

  • @dennisthurston727
    @dennisthurston727 ปีที่แล้ว +4

    I'm here in California and worked in the woods logging and those that ran the dozers were called "Catskinners" , I assume because they were all caterpillar equipment

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว +2

    I’ve driven allis chalmers equipment and worked on it too. I did a lot of mobile service for the farmers around here but also done it on construction sites too

  • @paulastrickland2259
    @paulastrickland2259 ปีที่แล้ว

    Hey guys, my husband enjoys your videos. He is retired but was a heavy equipment operator and makes lots of suggestions while he's watching it. LOL.

  • @berniemarkley
    @berniemarkley ปีที่แล้ว +2

    Harvey, IL is a southern suburb of Chicago. The reason the tag says Harvey is that the engine was manufactured there. It was originally the Buda Engine Co which A/C purchased in 1953. Moline, the home of Deere, is in the Quad Cities on the opposite (west) side of IL and sits on the Mississippi River. Interestingly enough, Farmall tractors were made in Rock Island, IL which sits next to Moline and is another of the Quad Cities, Bettendorf and Davenport, IA being the other two. Thus, concludes today's history lesson, lol

  • @Damnitbobby257
    @Damnitbobby257 ปีที่แล้ว +2

    I’m glade to see Hank doing more work

  • @stevenicoson6670
    @stevenicoson6670 ปีที่แล้ว +3

    Thanks for another great video. It was interesting.
    Sorry you could not get it to run. You got it to just start but would not keep going.
    Try having that ether more accessible and give it big doses. The bigger the engine the more it needs.
    You and Wiley put your all into it. Wanted to go. I bet it had huge batteries in it to run the starter. Tough old machine to get started. Sorry guys. You gave it a great try.
    Thanks hank and Wiley for your efforts.
    The Iowa Farm Boy.

  • @Doodle-dm6qf
    @Doodle-dm6qf ปีที่แล้ว +3

    key should be on left side of seat on battery box 2. check oil while engine is running

  • @revving56
    @revving56 ปีที่แล้ว +2

    Make: Allis Chalmers Model: HD16 Years Made: 1955 - 1965
    Factory: Springfield, Illinois, USA Chassis: crawler Wheelbase: n/a
    Front tire: tracks Rear tire: tracks Weight: 31,500 lbs [14288 kg]
    Length: 178 inches [452 cm] Width: n/a Height: n/a
    Elec. Grounding: n/a Elec. Charging Amps: n/a Elec. Volts: n/a
    There is all the information on it

  • @matthewcaldwell8057
    @matthewcaldwell8057 ปีที่แล้ว +2

    Love all your videos buddy. Always been a fan of the older diesels with turbos. Nothing like hearing the diesel and its turbo make some noise again

  • @vanman4x4
    @vanman4x4 ปีที่แล้ว

    My landlord had one of those. It was parked for probably 20 years. Between a friend and myself, we got it running and back to work , it was a fun project

  • @JerryMcDowell-ex6rx
    @JerryMcDowell-ex6rx ปีที่แล้ว +2

    You guys are awesome together don't change how yall do anything 😊

  • @TestECull
    @TestECull ปีที่แล้ว +3

    9:40 That's setting huge warning klaxons off in my head. Oil floats atop water. You stick a dipstick into a sump that's got 3 gallons of water beneath 4 gallons of oil in an engine that hasn't rotated in years you'll get a dipstick looking exactly like that.
    My next step would be dropping the drain plug out of it and seeing how long it takes to get oil out. I'd bet dollars to donuts there's a LOT of water in that crankcase.,
    It could also have a lot of diesel in it, which would mix in well, still lift the level up. Your sign there would be it smelled dieselly and had zero viscosity. Still, I'd be draining and refilling the sump before I tried to start that engine.

  • @AndrewHCann
    @AndrewHCann ปีที่แล้ว +3

    Excellent video Hank :) & Wiley :) also you guys tried best on this dozer and hopefully in future trying to work again!

  • @JosephCarmichael-o6s
    @JosephCarmichael-o6s ปีที่แล้ว

    I have operated Alice Chalmers, Drexel, John Deer and my favorite CAT. Love some big yellow. Stay safe my friends.

  • @jsimm4587
    @jsimm4587 ปีที่แล้ว +3

    I think you proved it would start and I think Wily was in a better mood this time !

  • @jeffchattin4799
    @jeffchattin4799 ปีที่แล้ว +5

    Those out board final bearings were a weak point on Allis dozers. You need to check the wishbones and make sure they are tight also if they loosen up it will cause the axle to misalign

  • @mike-tl3is
    @mike-tl3is ปีที่แล้ว +4

    Thank you hank for your services i salute you sir🫡🫡

  • @Jacob_6420
    @Jacob_6420 ปีที่แล้ว +5

    Good video guys. Keep them coming

  • @fredrickugarner8278
    @fredrickugarner8278 ปีที่แล้ว

    Guys the last thing you do not want to do is hit a battery post with hammer or any thing there is a connection that that it breaks and I just learned that 2 years ago and I have been turning tools for over 50 years and probably broken over 4000 of them guys I love your show. God Bless you both and your family’s.

  • @stoptheirlies
    @stoptheirlies 8 หลายเดือนก่อน +1

    Hey guys, if you want to increase the Amps but not the Voltage then you put the batteries in parallel but you would need to parallel both of them so you would need 4 batteries

  • @robertaustinhamilton5487
    @robertaustinhamilton5487 ปีที่แล้ว

    It is a testament to the old geezers that work so hard to get those old relics up and running either take buy or take them home for someone.

  • @spencer-fatbike
    @spencer-fatbike ปีที่แล้ว +1

    When Hank was singing
    My neighbors called
    Wanted to know why I was beating the cat

  • @73DiamondReo
    @73DiamondReo ปีที่แล้ว +23

    It help if you pulled back on the throttle so it was getting fuel. For as many videos as you guys do you sure miss the basics to getting stuff running but maybe you do that on purpose for the comment generator effect.

    • @sueforrey9804
      @sueforrey9804 ปีที่แล้ว +1

      I had an hd 16 just like that one. For some reason the fuel shutoff was backwards,u push it in to shut down the fuel and pulled it out to run. Not sure if that was the way they were all set up or someone changed it.great pushing tractor,torque converted kept the tracks from breaking loose for max traction

    • @ralphchristian9273
      @ralphchristian9273 ปีที่แล้ว +1

      Time to feed wiley

    • @anthonyking4387
      @anthonyking4387 11 หลายเดือนก่อน

      I really dont think so! Anyone who can ring that many bolts off in a row, got all their tools for Christmas not many mechanics got all brand new tools

    • @hfdzl
      @hfdzl 11 หลายเดือนก่อน +1

      Looks more like a brush guard. A ROPS would be a lot more heavier built to support the tractor in a rollover. Keep up the good work, boys!

    • @stevenschoo5546
      @stevenschoo5546 9 หลายเดือนก่อน +1

      Did you guys drain the fuel out of the tank

  • @donparker8246
    @donparker8246 ปีที่แล้ว +2

    Puddin is a good guy. I love his videos.

  • @benjaminstockton3917
    @benjaminstockton3917 ปีที่แล้ว

    Thanks!

  • @tommyhall2768
    @tommyhall2768 ปีที่แล้ว +1

    Good luck guys. Be safe out there

  • @PuddinsFabShop
    @PuddinsFabShop ปีที่แล้ว

    Warning were just havin fun, if you take things too serious, this channel may not be for you buddy!
    I’ve actually had it off the intro for awhile. You may of just inspired me to put it back on! Keep up the good work gentlemen!

  • @RandyB1973
    @RandyB1973 ปีที่แล้ว +1

    I LOVE watching Puddins Fab Shop!

  • @ManCaveMotivation
    @ManCaveMotivation 3 หลายเดือนก่อน

    G’day lads from me in Australia!
    Love the channel.
    🍻🍻

  • @gbowne1
    @gbowne1 ปีที่แล้ว +1

    What my uncle said about "fuel oil" from the past is that back then they called Diesel "Fuel Oil". Diesel is a bit more modern term, although the Diesel mix back then probably had a little more of a lubricant in it as well, so it would have been fuel+oil.

    • @john2256
      @john2256 ปีที่แล้ว

      Diesel is a light oil.

  • @congaman100
    @congaman100 ปีที่แล้ว +1

    When Wiley sad you read my mind I immediately thiught: If you could read my mind, love
    What a tale my thoughts could tell
    Just like an old time movie
    'Bout a ghost from a wishing well

    • @jayjones6904
      @jayjones6904 ปีที่แล้ว +1

      Ole Gordon lightfoot excellent artist

  • @LeviSheets-s5j
    @LeviSheets-s5j ปีที่แล้ว +1

    I hope you can get it to start I would like to see it running 😊

  • @charlessingleman3725
    @charlessingleman3725 ปีที่แล้ว +1

    Hank, you are a much better mechanic than singer. 😵‍💫

  • @jaredthisdelle5617
    @jaredthisdelle5617 ปีที่แล้ว +1

    I'm here for the b.s 😂😂😂😂 and ya puddin rocks man .hope you get this thing going

  • @danswartwood4580
    @danswartwood4580 ปีที่แล้ว

    Thank you for sharing and your APPRECIATION to your subscribers Hank

  • @JosephRozum
    @JosephRozum ปีที่แล้ว

    Good Evening Gentlemen , I hope you are having a fantastic day today ! 😊

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว +2

    Hey yall it started we seen it run and yall gave it a hell of a fight we appreciate yall too for giving us someone to watch play with stuff we ain’t got time to ourselves. I appreciate y’all thank ya 👍🏻 JR..

  • @benjaminstockton3917
    @benjaminstockton3917 ปีที่แล้ว

    Awesome video, Hank and Wiley it ran for a little bit. I appreciate you guys 👍

  • @rockerpat1085
    @rockerpat1085 ปีที่แล้ว

    1, 2, Earnhardt, 4!!!! Love It Brother!!!
    Do It For Dale!!!

  • @johnniebellamy5912
    @johnniebellamy5912 ปีที่แล้ว

    Hank You Are A Really Good Singer

  • @texas_reaper197
    @texas_reaper197 ปีที่แล้ว +1

    😂😂😂
    Song:Smooth Operator
    Singer: Sade
    Pronounced: Shaa-day

  • @nelsonmattoon150
    @nelsonmattoon150 ปีที่แล้ว +1

    You guys find the coolest stuff

  • @twiin1987
    @twiin1987 11 หลายเดือนก่อน

    I can watch you two all day long. 😂😂. Great teamwork guys. 👍🏽. Saying hello from Phoenix Az.

  • @williamfrederick3849
    @williamfrederick3849 ปีที่แล้ว

    Wiley just remember SOS means Slower Older Smarter and then you found Hank...LOL 😊

  • @jayjones6904
    @jayjones6904 ปีที่แล้ว

    I loved ac started on 6 but operated buddy's pushing and clearing and pulling ole manual rd grader yrs ago good machines

  • @alvinstacy2282
    @alvinstacy2282 ปีที่แล้ว

    I ran the HD16 in Vietnam in 1966-1967 one tough dozer . Never once broke down.

  • @dale-o8c
    @dale-o8c 11 หลายเดือนก่อน

    My neighbor up the Street in Tupelo,Mississippi had alias Chalmers bulldozer I had to move it because he had a broken leg I had to park it in a different spot in his back yard that machine was fun to operate

  • @ronnieterry4916
    @ronnieterry4916 ปีที่แล้ว

    I saw several of these Dozers in South Vietnam in 1968 and 1969. I remember one at Conthein military Base just below the DMZ it had been on fire after the North Vietnamese had tried to come thru the perimeter.. The dozer was sitting on the perimeter. Actually the dozer may have been bigger than the one on your video. Then I saw another in 1998 at Fort Polk Louisiana in a military museum. It was military green in color and hadn't been used enough to wear the blade or the tracks. So that is two dozer stories both were U S Army Dozers.

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว

    Finally!!! 😃👍🏻👍🏻 you take our advice soak everything down with pb blaster sweet buddy👍🏻👍🏻👍🏻

  • @johnhicks735
    @johnhicks735 ปีที่แล้ว

    It's been setting for 32 years until y'all showed up to get it running again.

  • @kosh7911
    @kosh7911 ปีที่แล้ว

    I feel your email story as a retired Marine. Same type of situation. We had a field op go sideways because a boot 2nd Lt went off script. I was asked to write up my plan to correct all the issues the Lt had jacked up by my boss at the time who was a Lt.Col. I wrote it up and said something at the end to the effect “This should correct the goat rope that the 2nd Lt made. My recommendation is to keep this jack-wagon 2nd Lt in the admin department and let my NCO’s do what they’re trained to do.”
    End result was a good laugh and a bit of butt pucker when I found out the Lt Col had forwarded it to 3 E8’s, 3 O5’s, 1 O6 and the BGen….. the Lt Col flew cover for me and I survived. Only aftermath was the Lt Col reminding me that I should make sure I use a filter on my thoughts and he’ll proof read emails from now on.😊

  • @toddfrisch737
    @toddfrisch737 ปีที่แล้ว +1

    Love the videos guys. I enjoy watching you two. Hank how do you remember where all your tools and sprays are all the time? Lol

  • @cyclonusthewarrior7888
    @cyclonusthewarrior7888 ปีที่แล้ว

    I laughed pretty hard when Wiley said It takes Squidward to operate it.

  • @8978Marty
    @8978Marty ปีที่แล้ว

    I sure enjoy you and Wiley's videos. Keep em coming

  • @mhaltray
    @mhaltray ปีที่แล้ว

    Another great watch,thanks you two ...

  • @CharlesSober
    @CharlesSober 11 หลายเดือนก่อน

    You 2 definitely talk a lot 2 each other! It is all worth it!!

  • @coryweber6188
    @coryweber6188 ปีที่แล้ว

    I use to work on these old dozers the fuel shut off is under the tank in the back of the dozers

  • @jeffhiatt4000
    @jeffhiatt4000 ปีที่แล้ว

    Us old farmers were the mechanics like you guys

  • @davida.p.9911
    @davida.p.9911 ปีที่แล้ว

    Spark show!!! 😯😂😂 Some are more stubborn to start than others.....kinda like me in the morning. 😂😂 Good job fellas!!

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว

    Hank y’all need one them battery powered impact guns they help alot much better then hand tools plus the vibration from the impact helps to loosen rusty bolts and nuts

  • @victorrobinson7008
    @victorrobinson7008 5 หลายเดือนก่อน

    Yall boys need to start bringing some battery terminals to the job site !

  • @ralphriddle8864
    @ralphriddle8864 ปีที่แล้ว +1

    Good job and God bless y'all

  • @jesseperez3427
    @jesseperez3427 9 หลายเดือนก่อน

    Moline is close to Iowa border havey is about 5 miles south of Chicago harvey is where the first cut of the blues brothers wrecking the abandoned harvey mall .

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว

    Usually the toggle switch on right you turn to left for glow plugs and to right for power to starter button If it turns to left and the right that is.

  • @willwade1101
    @willwade1101 ปีที่แล้ว

    Fuel oil is a less refined form of diesel fuel. It usually burned a little sootier than agricultural diesel fuel.

  • @jesseperez3427
    @jesseperez3427 9 หลายเดือนก่อน

    Caterpillar was also based in Peoria il. 220 miles southwest of Chicago for 60 years

  • @robertthompson8759
    @robertthompson8759 ปีที่แล้ว

    On the old 530 if you were looking for parts for Black Betty it was in that junkyard does he want to get rid of it

  • @edwardjackowski771
    @edwardjackowski771 29 วันที่ผ่านมา

    Yes I have ,,,,and it caught on fire!

  • @bvr1962
    @bvr1962 ปีที่แล้ว

    OMG pudding rocks he is one of my top channels how do you like his free up frozen engine with vinegar and other stuff funny guy

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว

    I do notice every time tho you spray juice and as soon as it starts you stop spraying and it stalls when you know it won’t run without it.

  • @frankcopus686
    @frankcopus686 9 หลายเดือนก่อน

    Love your videos thank you for your service by the way keep up the good work

  • @dustanshields2815
    @dustanshields2815 ปีที่แล้ว

    The big batteries that was in there at the start I think are 4DLT batteries

  • @garymessina1609
    @garymessina1609 ปีที่แล้ว

    Great try thanks Hank and Wylie

  • @jacksonsteele1304
    @jacksonsteele1304 ปีที่แล้ว +1

    Every day that's all I use is Allis Chalmers

  • @dopeynightlifetv6859
    @dopeynightlifetv6859 ปีที่แล้ว

    Hank, i call ether the Sydney Crosby sauce it works wonders 💪

  • @louiestinson8979
    @louiestinson8979 ปีที่แล้ว

    well i'm from California and yes, the politics suck. love your videos.

  • @kevinblevins2612
    @kevinblevins2612 11 หลายเดือนก่อน

    Wiley is the best!! Keep on keeping on

  • @jasonmyers3847
    @jasonmyers3847 ปีที่แล้ว +1

    I always tell people something. "Come on out to Nazifornia to visit." DO NOT. I repeat DO NOT move out here. You'd be very sorry. Napa Valley is about 300 miles West, of me in Angels Camp. It's very beautiful, too.

  • @robertpeters9438
    @robertpeters9438 11 หลายเดือนก่อน

    Remember...back in the day, many farm boys went into the military. Were already familiar with mechanical farm machines, were used to repairs and in-field kluges. We're trained as mechanics or machine operators, and conditioned to work in teams! The engineers thus had in.the.field knowledge and insight into ease of repair and etc.
    If we put similar investment in our youth, THEY would become the next greatest generation!

  • @greggduplinski38
    @greggduplinski38 ปีที่แล้ว

    Ran one like that and also old crawler backhoe and bucket open closed was great for brush

  • @SteveBrock-c7c
    @SteveBrock-c7c 8 หลายเดือนก่อน

    The oil has removed itself from all the nooks and cranny's❤

  • @TopNotchSawRepair
    @TopNotchSawRepair ปีที่แล้ว

    I watch Puddin fab shop every Monday and he's a funny man. Sitting on your a$$ won't finish your project, he says that all the time. So darn true

  • @JRRott-mj5jq
    @JRRott-mj5jq ปีที่แล้ว

    Boiled chicken? 😂😂 what no leftovers from thanksgiving? Wiley dang buddy you better go to hanks house and get some 😂😂

  • @lifewithshyy1169
    @lifewithshyy1169 ปีที่แล้ว

    Love the longer videos great job