Hornady Rifle Bullet Feeder Loading 223 w/Lock-N-Load AP
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Please consider supporting Ultimate Reloader on Patreon: / ultimatereloader
-------------------------------------------
Important: See disclaimer at end of video description.
-------------------------------------------
In this video I demonstrate loading 5.56 NATO / .223 Remington with the new Hornady Lock-N-Load Rifle Bullet Feed system on the Hornady Lock-N-Load AP 5-station progressive reloading press. Full story on ultimatereloader.com
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving posessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this TH-cam channel (gavintoobe).
Any reloading data supplied on this TH-cam channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition relaoding data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this TH-cam channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to to activities, procedures, techniques, or practices described in whole or part on this TH-cam channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this TH-cam channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Hornady
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] ฟุตบอลชาย ฝรั่งเศส vs อเมริกา รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/oZ9aSS0NEEg/mqdefault.jpg)
It's sickening to see such a clean reload shop.
Kudos.
Hahahaha. I'll admit it gets messy some times. :)
Thanks so much for making videos about this press. I was on the fence about buying one, but you made up my mind, I went ahead and ordered it last night!
Great reloading videos! keep up the great work!!
sweet setup
Good video. This looks like a good system. I ended up buying a RCBS .22 bullet feed back a few years ago since Hornaday did not have theirs ready at the time. I have it on my LNL-AP. It works pretty well but I think this new Hornady setup looks better. A case feed and bullet feed is the way to go IMO. I have loaded thousands of 5.56 on mine all the way from 55 grn up to 77 grn. For the most part it is about 98% hassle free once set up.
I thought I was the only one on earth the uses Varget with a LNL-AP. I have grown tired of people saying it can't be done because of the larger Varget powder size!
Nice. Waiting to see the .30 cal kit. My Dillon may have some competition.
Hey, my bench is set up similar with the sliding grooves. How do you mount up the reloader to a board or something???
Now the ultimate challenge for me is to get mine Hornady set up properly like this.
Where did you get the bullet feeder for the 223 I would like to buy one let me know thanks
I told my wife I was gonna loose a finger or two if I didn’t get all those bullets and brass feeding gadgets, and guess what I got!!!
The only thing I'd add is a powder check. Just to make sure. Seen one rifle barrel turn to banana peels from an accidental double load.
Hello Gavin, is your bullet feeder a newer version? I ask because I've seen other video's that show the bullet feeder with out the "micro" shut off switch.
By the way Love the video's... Thanks Mike
I love my LNL pistol bullet feeder (and case collator) but am thinking this wouldn't work well with the majority of boat tail bullets; especially small caliber stuff. With enough fine tuning, I'm sure anything is possible. But then again, spending more $ on boat tails and sending them through a progressive maybe somewhat pointless. I dunno but the earlier vids of throwing extruded powder through a volumetric powder measure are what I ran into. Binding of the thrower smashes the case mouths. If I we could get volumetric metering to work well with extruded powders, maybe this would be a more attractive option to persue. I'm considering running some sort of funnel dump in station #2 and then running the Chargemaster but this is going to be almost as time consuming as a single stage.
Gavin, I searched your channel for the correct video to ask this question on but could not find a recent Dillon XL650 loading 223 video. I am having an issue with powder drops. I have to give a full 3 second count while dropping powder to avoid spilling powder all over my case holder plate. I am using Hodgdon BL-C(2) powder (ball, should drop faster than stick or flake) in the standard dillon XL650 powder measure. I did have an issue where my powder die was set too close and barely compressing the case necks about .001-.002", but I have since adjusted it. Is this issue something you are familiar with? I watched you laod .223 on this LnL press as well as the Lee Loadmaster with barely a pause as the powder dropped. You were even using stick powder on the Lee. Surely something is wrong. I know it doesn't sound like much, but having to wait an extra 2 seconds with every stroke really adds up when you are loading 5000rds. Could you give me some pointers?
Whats the height of the entire system?
can this be put on a lee loadmaster?
The track system on your bench how do I get one
Can the LNL Rifle Bullet Feeder adjustable support bracket be used with the LNL Pistol Bullet Feeder?
Hornady's FAQ states the rifle bullet feeder requires a taller and adjustable bracket and that the pistol feeder bracket will not work. But they don't say if the rifle feeder bracket will work with the pistol feeder.
Thank-you!
I sorry but I'm new to this but what is the setup cost for a unit like this
What parts do i need to make 308 match, 223 match and 9mm Luger?
The technical support isnt aible to give me the specific parts numbers i need, the keep talking around 😑
Are you decapping and resizing here too? He has the decapping and resizing die in the press but can't tell from the brass.
I’m looking at getting this press “loaded” as you have here, I load precision 6.5 Grendel and precision 5.56, as well as .45 auto, Is it really precise enough for the 6.5 Grendel and 556, when I’m shooting for under .5 moa? I’ve been loading on a single stage press for a couple years, and a
Would like to speed up the process and Take an all day event down to a couple hours.
I would like to know this as well.
Gavin do you use an ex pander in the powder measure to expand the part were the bullet will seat.
Terry LeGrand Flaring doesn't work to well with small caliber rifle case mouths. It causes them to drop into the case and requires another resizing that would cut brass life 1/2.
So should I get the Ammo Plant or the RCBS Pro Chucker 7? Or a Dillon 1050?
Looking to mass load 9mm and .223 and maybe some .45ACP and .308
+YuanMizzle Ive got the full hornady ammo plant and I like it but I wish I had a 1050 no shit!!! the ammo plant is temperamental and still clinky. the 1050 is solid as a rock.
Seats and feeds - does it crimp also ? are you planning videos on the new Hornady feeder tubes?
Darren Fincher Yes it crimps too.
How many rounds of 9mm could you load in one hour with this machine?
Have you heard of & what do you know of "the poor man's L-N-L mechanical 3-d case feeder " . Does it work & where can it be bought or do you have to 3-d print it yourself ? Thanks for your input .
Printed it myself, built it, fought it for days, threw it away, bought the hornady. It’s not good
I'm having trouble deciding which progressive press to purchase it's between Hornady lock N load AP vs. Dillon XL650 I do plan on purchasing a bullet feeder and case feeder eventually.
Are you going to be doing lots of caliber changeovers? Or sitting cranking out 1000s of rounds at a time?
I mostly plan on reloading 9 mm with occasional 45 ACP. My main concern is accuracy so I'm looking for a progressive press that is very consistent . I currently reload on a Lee single stage press Averaging 50 rounds an hour.
If accuracy is your concern, then I would steer towards the Lock-N-Load AP because of the float you get (for dies) with the lock-n-load bushing system.
Thank you for that info.
Are you full length sizing in the process ? or just loading already sized brass?
I've often wondered how many people do that- they just clean rifle brass and disregard the trimming/chamfer/deburring to save time, not realizing the brass has grown beyond max length when resized.
My hornady setup resizes the brass, as I use once fired brass in my
reloads. Always turns out great
curious do u lube ur rifle cases before dropping into case loader
Yes, absolutely. You can also use something like the RCBS lube die instead of pre-lubing.
can this automatically deprime the brass?
+efg abc forgive me if im wrong but i believe you would want to deprime it first, then clean and tumble it, check for shell stretching, etc.
in most cases when you pick up your range brass and its still relatively clean you dont need to tumble it, but if you want to tumble it before hand you can as well, but this will deprime and reshape the brass with the right die
Seems to me this is a tremendous cost to make standard ammo. If one wants precise ammo, one should load each one individually.
Hornady 095345
Does this remove military crimp?
Military crimp has to be done seperately. Hornady make a machine for that also
I wonder if hornady would use their own product or a Dillon
that last round was 0.002 check your eyes... Gary
Could be I'm using 1/2 of total needle swing (when I say +/-, instead of net swing)
I see...thanks...
Is anyone from Utah?
...no... no one is from Utah. Not even Mormons.
lol
Dont buy the story
Need more proof
Would like to send thousand rounds of brass to see how it runs. If its stays with in thousand loading
That many then sure its worth time and money. Dont save on money just shoot more papper.
Two hundred yards
Is flat shooting
500 yards is loading skills to stay the same on papper
Have been reloading with this system for 5 years never had any
problems. I use once fired brass and concentricity is always good.