MOKA SFX After Sales Guide iii1 c2/c4 | How to Replace Valves and Spool for Your Co2 Jet

00:16 Step 10.When there is air leakage at the nozzle of your co2 jet machine, this is generally divided into two situations. Situation 1: The valve core is clogged, and the valve core needs to be cleaned/replaced; Situation 2: The valve is damaged, and it is necessary to replace valve.
This video will teach you how to replace valves and spool for your co2 jet
▼To learn more about after-sales maintenance, please click here▼
• Aftermarket Parts Repl...
• Aftermarket Parts Replacement Guide •
Tools: wrenches (No. 34, No. 27, No. 7), screwdriver, small scissors
00:26 Replace the spool
Step 1. Unscrew the nozzle.
Step 2. Use wrench (#27) to remove elbow screws.
Step 3. Use wrench (#27) to remove fitting.
Step 4. Remove the 4 screws holding the panel in place.
Step 5. Remove the 4 screws securing the rear panel.
Step 6. Use a screwdriver to remove the bottom 6 screws (all except the two screws holding the valve bracket)
Step 7. Take the cover off.
Step 8. Use a wrench (#7) to hold the nut and then use a screwdriver to remove the screws holding the valve in place and remove the valve.
Step 9. Pry open the solenoid coil with a small pair of scissors and remove
Step 10. Unscrew the upper part of the valve with a wrench (#34) and take out the bad spool
Step 11. Replace the spool with a new one and use a wrench (#34) to screw the upper part of the valve back in (the upper part of the valve is tightened by keeping the thin line in line with the lower part of the valve)
Step 12. Use a wrench (#7) to hold the nut and then use a screwdriver to install the retaining valve screws.
Step 13. Put the solenoid coil on the valve
Step 14. Fix the cover plate cover first, then fix the motherboard bracket plate
Step 15. To fix the front panel first, then to fix the rear panel.
Step 16. Then use a #28 wrench to screw back into the connector.
Step 17. Use a wrench (#27) to tighten the elbow screws.
Step 18. Last, screw the nozzle back on.
00:26 Replace the valve
Step 1. Unscrew the nozzle.
Step 2. Use wrench (#27) to remove elbow screws.
Step 3. Use wrench (#27) to remove fitting.
Step 4. Remove the 4 screws holding the panel in place.
Step 5. Remove the 4 screws securing the rear panel.
Step 6. Use a screwdriver to remove the bottom 6 screws (all except the two screws holding the valve bracket).
Step 7. Take the cover off.
Step 8. Use a wrench (#7) to hold the nut and then use a screwdriver to remove the screws holding the valve in place and remove the valve.
Step 9. Pry open the solenoid coil with a small pair of scissors and remove the.
Step 10. Take the new valve and wrap the interface screws with thread tape (10-15 turns), use a wrench (#7) to hold the nut and then use a screwdriver to install the screws that hold the valve in place.
Step 11. Put the solenoid coil on the valve.
Step 12. Fix the cover plate cover first, then fix the motherboard bracket plate.
Step 13. Panel fixing first, then rear panel fixing.
Step 14. then use a #28 wrench to screw back into the fitting.
Step 15. Use a wrench (#27) to tighten the elbow screws.
Step 16. Just screw the nozzle back on.
#co2 #co2airgun #co2jets #co2jet #handle #how #howto #mokasfx
I Hope you enjoyed this video - please thumbs it up if you liked it and subscribe for more videos.
Want to get more information with our company, check the web site:
www.mokasfx.com/ www.mokalighti...
------------------------------SOCIAL-------------------------------
Instagram: / moka_stage_equipment
Linkedin: / mokastagefx
Facebook: / mokastageequipment
NEW HERE? Hi! My name is Jerry. I am an Expert with Stage Equipment, work at MOKASFX more than 4 years. I will keep posting new videos every month. Subscribe to my channel to get DJ Tips & Tricks, Tutorials, MOKA Stage Equipment Reviews, and some awesome SFX and Stage Lighting for your reference!
For Business Inquiries Contact to me at--
[e-mail]
Mobile/Whatsapp: [phone]