Какая потрясающе красивая игра древесной структуры. Как шелк переливается после шлифования! И это на видео. За таким столом можно заниматься релаксом любуясь переливами. ☝️😁👌
Just read all the comments and not one person noticed that the platform is completely fixed across all three boards...these large boards need room to expand and contract. Open up the holes with your Dremel tool on either side of the screws (approx 5mm). Tighten just enough to be firm so the boards can still move with the change in humidity and not blow out the screws. The wood will always win my man. 😎
@@mokongtv123 Movement in wood caused by humidity changes is not a theory. It's a scientifically proven fact. Wide boards like that are even more susceptible than narrow boards and especially that board that has been forced in to plane with the rest. If you want to take the risk that the top will crack and split over time then fair enough. Personally, I would have used threaded inserts and M6 or M8 bolts just short of being tight to allow for movement. Not sure edge jointing boards counts as lamination either.
I am new to wood working, I see you force to bent the curve board to be straight and joint to the other two straight boards. I wonder will that curve board break or it will make the other two straight boards become curved after a period of time
I have been doing custom wood working for years and I don't believe they will stay I didn't see how the grain was so I can't tell for sure... on a project like that it should be fine but I wouldn't use that on a high-end piece
@10:40 The incredibly rare sight of a Korean removing the blue plastic protective film. People who have lived in Korea will understand how rare this is.
Very well done! Never thought that boards with such blemishes could be useful. I'm sort of curious, what resin was used and what grinding wheel was used to grind down the uneven edges? Good craftsman ship! Keep up the good works. Thanks.
I’ve seen the tape method of damming epoxy fail a few times. Maybe this is better, even if it’s more time consuming. BUT if you’re using epoxy you MUST fill in the holes and gaps fully. No cracks left of any kind like I think I saw here. It separates the 8/10 from the 10/10.
Потрясающий стол! Изумительный цвет! Фактура! Работа мастера выше всяких похвал! Спасибо за видео! Удачи вам!
Какая потрясающе красивая игра древесной структуры. Как шелк переливается после шлифования! И это на видео. За таким столом можно заниматься релаксом любуясь переливами. ☝️😁👌
파이팅 즐거운 하루 되세요행복한하루되세용
나무풍경 아주멋져요
나무책상도 잘어울려요
직접만든 나무책상라서 짱 멋져요
Nice to see the Ronco company branching out from Veg-A-Matics to table hardware.
Lots of tips and hints to learn from this professional workmanship.
Even with an imperfection on one of the planks, it still looks so beautiful!
You are a true master. I wish I live in South Korea. I would've applied to be your apprentice.
Just read all the comments and not one person noticed that the platform is completely fixed across all three boards...these large boards need room to expand and contract.
Open up the holes with your Dremel tool on either side of the screws (approx 5mm). Tighten just enough to be firm so the boards can still move with the change in humidity and not blow out the screws.
The wood will always win my man. 😎
Just your theory
@@mokongtv123 Movement in wood caused by humidity changes is not a theory. It's a scientifically proven fact. Wide boards like that are even more susceptible than narrow boards and especially that board that has been forced in to plane with the rest. If you want to take the risk that the top will crack and split over time then fair enough. Personally, I would have used threaded inserts and M6 or M8 bolts just short of being tight to allow for movement.
Not sure edge jointing boards counts as lamination either.
Делаешь дело! Уважение! Продолжай работать, выкладывай видео. 👍
I think there's a special place in hell for people who kill the live edge on beautiful peices of walnut. 🤣
역시 싱글샌딩이 최고임~!!
모션 데스크 보려고 판매사이트 들어갔다가 이 영상 있길래 멍하니 첨부터 끝까지 다 봤네요
저희 세차쪽에서도 꼭 필요한 싱글 폴리셔도 쓰기고 여러모로 재밋게 보고 갑니다! 감사해요~
제 영상을 보고 그쪽으로 가야 하는데 그쪽에서 이리 오셨네요^^ 저 싱글 폴리셔를 처음 써 봤는데 꽤 괜찮네요. 시청 감사드립니다^^
@@mokongtv123 나무토막
Masuk pak dengan alat ini kerjaan bisa cepat terselesaikan,,,, hadir ya pak,,,
I really liked this video - you are a true craftsman
I'm not a true craftman. But I love this video, Too!
Excelente trabajo. valió la pena cada minuto y cada segundo del vídeo.suerte en el Canal.💪👍
Ellerine sağlık harika bir masa oldu
Super Arbeit sehr schönes Tisch
Danke schöne!
Nice idea 👍👍👍
Excellent work 👍 I love it.
Very beautiful as always, I am really glad I discovered your channel.
Muy..bien Exelente trabajo..Saludos desde Argentina..Mnes.!! Sigue publicando Gracias
I am new to wood working, I see you force to bent the curve board to be straight and joint to the other two straight boards. I wonder will that curve board break or it will make the other two straight boards become curved after a period of time
I have been doing custom wood working for years and I don't believe they will stay I didn't see how the grain was so I can't tell for sure... on a project like that it should be fine but I wouldn't use that on a high-end piece
It looks great
And I have been a good boy my whole life, painstakingly jointing everything. If I would have known that I could just dowel it all and close my eyes
what wood? it looks very sturdy
Nice job kaibigan 👍✌️🙏
thanks for sharing your talent on tv
SUPER WELL DONE /magic CARPET===
Algún día, ojalá más temprano que tarde, aspiro a alcanzar este nivel de prolijidad y simpleza. Mientras tanto, solo Mokong supera a Mokong
Very inspiring, amazing my friend? 👍👍🤝🇲🇨
Beatiful
Muito legal....Mesa que sobe e desce. Nunca tinha visto. Muito legal....Sucesso no canal.
Wow verry nice 😍😍😍
Very good job ! 👏
Respect ! 😉
Very impressive! Good job bro!
Beautiful
높이조절 책상에 관심 있었는데 참고가 되네요. 원목 작업하는데 오래 걸리 셨을 텐데, 얼마나 오래 걸려 작업 완료 하셨나요?
실제 작업한 날로는 3일 걸렸고요, 레진 굳는 시간이 있어 완성되는 데에는 넉넉히 5일 정도 걸립니다. 시청 감사합니다.
Idol ang galing mo naman
Beautiful work sir
@10:40 The incredibly rare sight of a Korean removing the blue plastic protective film. People who have lived in Korea will understand how rare this is.
Wow good job mr
Hadir nyimak om
Bagus, inspiratif ..
Отличная работа!
very nice unique
Very well done! Never thought that boards with such blemishes could be useful. I'm sort of curious, what resin was used and what grinding wheel was used to grind down the uneven edges? Good craftsman ship! Keep up the good works. Thanks.
Keren bos 👍
Looks great! Did you finish the underside of the top?
Awesome 🤩
perfect!
Nice works👍🏻👍🏻👍🏻💪🏻
O trabalho foi excelente, mas o sistema de elevação dos pés e muita coisa para você colocar em uma altura e nunca mais mexer.
Belíssimo trabalho. Parabéns.
Well done 🎉
Nice work
작업 잘 봤습니다.
현재 모션데스크 쓰고 있는데 MDF 필름 책상이라
원목을 가공해서 붙여보려고 하는데
원목 집성한곳에 띠열장없이 바로 피스 박으면 잘 버텨줄까요? 익스텐션 와셔도 아니라서
불안해서 아직 시도해보지 못하고 있습니다. ㅎㅎ
Nice.
Wonder if hot melt glue would have been easier than CA for the epoxy blockers.
Good job, still final touches reqd in the area where resin was poured into. 👏
Yes like black tail
Nice.
Интересно!!доски расширяясь и сжимаясь оторвутся от шурупов?
Вот тот же вопрос. Средняя доска совсем горбом. Со временем сорвет шпунты?
러시아 사람들의 태도가 매우 흥미롭습니다 왜 이러는 걸까요?
Nice work ,what finish you used ,looks great ! Id like to use it on my kids desks .thanks
varnish
Thank you
harikasınız süper işler yapıyorsunuz
Good🎉🎉🎉🎉🎉works🎉🎉
Con ése tipo de mecanismo elevador eléctrico, creo que hubiera sido un mucho mejor terminado de la superficie de la mesa!!!🤔🤔
Precision.
정성이 많이 들어가네요.👍관심있어서요. 상판 가로*세로*두께 알 수 있을까요?
1440x720x25 입니다 감사합니다
Гений.
По фактуре это похоже на дуб. Или нет ? У меня такой же стол уже 22 года ,только из сосны .Твой тоже отличный супер.. Удачи тебе.
Написано орех )
@@vne-seti нихрена себе орешек. Где же интересно растут такие гиганты ? У меня максимум хватило ореха это на одну табуретку.
That middle board, with the warp and those holes, were no match for you! Another great work of beauty!
God job
Ortadaki dönme yapmayacakmı ? zamanla açılır bence
Very good gênio Brasil
Ok
Very nice ! Wish I lived in your area, I'd purchase from you.
رائع🇲🇦👍
Конечно всё отлично, но думал, что ножки сделаешь деревянные.
우와 1년넘게만에 들어왔는데 엄청난 변화내요^^
페스툴 도미노에 샌딩기에 수압대 자동대패에.. 예전에는 목다보로 하시고 그러셨는데
신기해서 글남기고 갑니다~!
혹시 쓰시는 오일의 종류는 어떤 오일이실까요? 글자보이는거보니 국내꺼같아서 여쭤봅니다
그린우르 옻바니쉬골드를 사용했던 것 같습니다. 감사합니다.
@@mokongtv123 답글정말감시드립니다.
혹시 바니쉬바르고 닦아내실때사용하시는건 광택기이신가요.
@@disignback7532 폴리셔입니다. 번역하면 광택기가 되겠네요.
You've got to get some tape for making the resin barrier. It seems like a real waste of time to stick squares of wood and have to sand them off.
I’ve seen the tape method of damming epoxy fail a few times. Maybe this is better, even if it’s more time consuming. BUT if you’re using epoxy you MUST fill in the holes and gaps fully. No cracks left of any kind like I think I saw here. It separates the 8/10 from the 10/10.
Có bán máy đục đó kg chú ơi
Muito bom show
Great!!
Amazon Sells that box ( components) ?
와 ^^~~
Интересно, для чего такой подъёмный стол? И не вырвет ли со временем средняя доска то, на чем она держится, ведь она в постоянном напряжении?
Where you buy hydrolic?
Quien no con todas las herramientas así asta mi mamá
En México conocemos esta madera como Tzalam
Congrats. 👏👏👏 Can you write the table dimensions?
Ficou muito bom 👍
good job R u korian?
I'm Korean
@@mokongtv123 I'm your FC from Thai.
Gostei! Gostaria de adquirir um par de pernas de mesa elevadíssima ! Qual ê discriminação ou fornecedor amigo?
안녕하세요 혹시 샌딩기랑 원형톱가이드? 정보 알수있을까요
안녕하세요. 샌딩하는 데 3가지 기계를 사용한 것 같습니다. 페스툴 샌더, es산전 폴리셔, 교세라 폴리셔. 원형톱 가이드는 보라 가이드입니다. ▶보라 WTX 가이드 클램프 : bit.ly/3AXa9WT
@@mokongtv123 헐 댓글 달아주실줄은 몰랏어요 감사합니;다!!
What is the name of that guide bar you're using ?
Please give me information and address to buy this set of table legs.
Dumb question: why u put there this one cracked wooden board ? Is not better replace it with good one?
May I ask what did you spray the ca glue with?
thank you!
water! Thanks.
Hello! Is a beutiful work! Can you translate me te name of the finish you use? thanks
Ott Varnish from sumac(lacquer tree) extract. Thanks.
제품 구매처 링크가 저게 맞나요??
링크에 오류가 있어 수정했습니다.
bit.ly/3z2TqR7
top
Qual nome desse máquina fura peça quero comprar um