Great video - as a longtime bike mechanic, I'd add to give your new tube a couple of pumps of air so that it takes its donut shape - not too much. It keeps the tube from twisting in the tire.
Great video! Thanks a lot! I was able to change the tube with its help :) Some things I'd like to add from my side: 1. When removing the plastic cover, need pull the cover away from the center, in the plane of the frontal plane. I was pulling in the direction of the wheel axis, and broke two plastic bumps :( 2. You had to apply the tape on the wires because they got scratched while you pulled the shell from the motor. There is a really small gap between the metal bars and the shell, and the shell is scratching the wires. Need to do pull super gently. Another way is to disassemble the shell as well, but this requires much more time.
Since there was No source found from what caused the Flat, when feeling the inside the tire. That would be a Problem for me, No source of flat found?? I would Like to have seen the Old Inner tube Cut across the tube in half to show the thickness of the cross section of the inner tube. I am wonder if a Much Thicker inner tube would provide more protection from flats?? with that Bent Valve Stem on the OEM tube it makes it more difficult to use a Heavy duty Inner tube
Yesterday, I was heading to work. I felt I had to press more on my left foot to stay in balance after half an hour of cruising then I fall from the wheel. On second attempt, I was able to balance but I was unable to control the direction. Now thinking back, it was flat tire that led to that fall. I really hope I fix my flat tire. Because I had my iphone cracked and replaced it. Everything worked but home button wasn't working. I will watch this video carefully and hopefully my wheel works as I tried at first time.
You should check to make sure your valve stem is not leaking inside the core that goes inside the valve stem can leak. You should rub spit in the opening of it to make sure it doesn't make bubbles. Sometimes if it leaks you can put a new core inside of the valve stem. And then test it for bubbles
Thank you for the video.Need rg05005hd5 fan (3.7V 0.12A 50x50x5mm) cooling wheel electronics KS-16a.I will accept any help, at least in the form of advice, but it is better to offer a new cooler ). I'm writing here because it's some kind of connection with people who understand something in mono-wheels. It turned out that it is problematic to find a small cooler in the largest country of the world) or its equivalent.
PEOPLE, IT IS DEFINITELY NOT AS EASY AS IT'S SHOWED! IT'S A PAIN IN THE ASS! I SPEND 20 MINUTES TO GET ALL SCREWS OUT AND TO GET THE SIDE COVER OUT BUT NOW IT JUST WONT GO OUT AT ALL! I'M SO UPSET
Great video - as a longtime bike mechanic, I'd add to give your new tube a couple of pumps of air so that it takes its donut shape - not too much. It keeps the tube from twisting in the tire.
Wow that is a much easier replacement than if you had to do a tube on a Gotway! Nice job.
Cheers Dude!
thank you, the job is waiting for me soon
Thanks! Your video was a life saver. It only took me 2.5 hours, but I got it done ;)
Glad it helped!
Very quick and easy to understand guide.
Glad it helped.
Straight to the point and very informative. Thx for vid man
Glad you enjoyed it! dont forget to sign up to the community www.ElectricPeople.org!
Great video! Thanks a lot! I was able to change the tube with its help :)
Some things I'd like to add from my side:
1. When removing the plastic cover, need pull the cover away from the center, in the plane of the frontal plane. I was pulling in the direction of the wheel axis, and broke two plastic bumps :(
2. You had to apply the tape on the wires because they got scratched while you pulled the shell from the motor. There is a really small gap between the metal bars and the shell, and the shell is scratching the wires. Need to do pull super gently. Another way is to disassemble the shell as well, but this requires much more time.
Awesome! Thank you these are really helpful!
Great vid! Be sure to put Slime in the inner tube ...
Can you please do a tutorial how to put 2.5" tire on 16s?
Thanks for uploading and thanks for sharing.
Thanks for watching.
Could you show how to change the tube on the Gotway Tesla?
How can you quiet the high pitch sound comes off when charging and riding? Thank you
When riding you cant. But when charging a different noise. Does charger itself make a noise?
how do you know which way to ride if it's one direction. 2nd, how do you know which side the battery is on?
Since there was No source found from what caused the Flat, when feeling the inside the tire. That would be a Problem for me, No source of flat found?? I would Like to have seen the Old Inner tube Cut across the tube in half to show the thickness of the cross section of the inner tube. I am wonder if a Much Thicker inner tube would provide more protection from flats?? with that Bent Valve Stem on the OEM tube it makes it more difficult to use a Heavy duty Inner tube
Pinch flats and leaky valve stems can happen without an object puncturing the tire
Sometimes if your valve stem is leaking you can replace the core inside of it and that will fix it. You can test it with spit or soapy water
Did you notice where is lift sensor is located?
There is no lift sensor on this version.
Interesting. My 16S has. After rain, it seems, it was soaked a little by water falling handle rails and had to recalibrate it.
Wow I'm in USA ur so far I need maintenance Help!!!
Yesterday, I was heading to work. I felt I had to press more on my left foot to stay in balance after half an hour of cruising then I fall from the wheel. On second attempt, I was able to balance but I was unable to control the direction. Now thinking back, it was flat tire that led to that fall. I really hope I fix my flat tire. Because I had my iphone cracked and replaced it. Everything worked but home button wasn't working. I will watch this video carefully and hopefully my wheel works as I tried at first time.
You should check to make sure your valve stem is not leaking inside the core that goes inside the valve stem can leak. You should rub spit in the opening of it to make sure it doesn't make bubbles. Sometimes if it leaks you can put a new core inside of the valve stem. And then test it for bubbles
Thats also a good idea 👍
Thank you for the video.Need rg05005hd5 fan (3.7V 0.12A 50x50x5mm) cooling wheel electronics KS-16a.I will accept any help, at least in the form of advice, but it is better to offer a new cooler ). I'm writing here because it's some kind of connection with people who understand something in mono-wheels. It turned out that it is problematic to find a small cooler in the largest country of the world) or its equivalent.
Definetly replace Philips bolts to hex flat heads
I don't get it, where's the part when you loose your shit cuz the valve doesn't come out ?
Ha ha
PEOPLE, IT IS DEFINITELY NOT AS EASY AS IT'S SHOWED! IT'S A PAIN IN THE ASS! I SPEND 20 MINUTES TO GET ALL SCREWS OUT AND TO GET THE SIDE COVER OUT BUT NOW IT JUST WONT GO OUT AT ALL! I'M SO UPSET
Fuc*ing gently! It doesn't want go gently. You just must do it hard to get the shit out!