Woodworking Angles Building A Chair - Geometry Tip (Part 2)

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ธ.ค. 2018
  • Beginner woodworkers trying to make a chair can get confused with all the angles and how to drill the holes for the legs. Chad Stanton breaks it all down for you and in this video shows the second half of how to find the angles for the legs and drill them into the seat. Make sure to watch part ONE before watching this video. (See the link below)
    Chad Stanton shows two ways to drill the seat resulting in precision and precise holes for the legs of the chair.
    Visit Us at www.woodchoppintime.com
    Like Us on Facebook: / woodchoppintime
    Follow Us on Twitter: / woodchoppintime
    Instagram- wood_choppi...
    Woodworking Angles Building A Chair - Geometry Tip (Part 1)
    • Woodworking Angles Bui...
    Starrett Protractor
    www.woodcraft.com/products/st...
    Forstner Extension Bit www.woodcraft.com/products/wo...
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 39

  • @ibaunited
    @ibaunited 3 ปีที่แล้ว +2

    Chad God bless you for this. I've been reading blogs and watching video for the longest time and no one has explained it in a better and simpler way. This is the first video that makes complete sense and removes all confusion. I'm working on my first windsor chair and after doing doing the tricky bending, spindles and legs - my project was halted because I was stuck here. Thank you so much. Keep shining my friend!!

  • @pamtnman1515
    @pamtnman1515 8 หลายเดือนก่อน

    I stank at geometry and math fifty years ago and I still stink at geometry and math today. This is a helpful video, thank you. However, like a lot of the woodworking content on YT, this is heavy on sophistication and calculation. Wood butchers like me just want basic know-how so we can have fun. Not looking to win any awards, just make gifts for people. The angle jig at the end was over the top, but if I just make one that is basic, it will work for the two-handed high torque, high power, slow rpm drill my forstner bits are in

  • @bakemore32
    @bakemore32 ปีที่แล้ว +1

    Your demonstration is an excellent guide for understanding the mathematical derivations of each angle and how the angles are used for correctly drilling the holes in the seat.

  • @shahbazking9628
    @shahbazking9628 8 หลายเดือนก่อน

    Thank you❤

  • @ronaldkirchoff938
    @ronaldkirchoff938 5 ปีที่แล้ว

    Chad, thanks for breaking down this complicated subject into easy and understandable steps. Great Job!!

  • @saulpenilla778
    @saulpenilla778 5 ปีที่แล้ว +3

    Hi Chad thanks with this video and rewatching part 1 I understand it better. I think I'll have to actually make a chair to hopefully learn this. Next year I'll send my plans to "What are you doing" 😀

  • @texsox
    @texsox 5 ปีที่แล้ว +1

    Thank you. I bookmarked this for a future project.

  • @fernandorivera5436
    @fernandorivera5436 5 ปีที่แล้ว

    I love this video. Actually I love all your videos with geometry. I love to learn new things and I had no idea of what’s involved in this technique. I’ve been intimidated with making a chair. I’m more confident now and I hope to build my first chair this year!

  • @chrischurch4551
    @chrischurch4551 5 ปีที่แล้ว

    Previous video makes a whole lot more sense to me, now. Thank, brother.

  • @robertbrunston5406
    @robertbrunston5406 5 ปีที่แล้ว

    Good video! Thank you.

  • @peterfitzpatrick7032
    @peterfitzpatrick7032 5 ปีที่แล้ว

    Professor Stanton strikes again !!
    My education continues...
    👍😎☘

  • @adrianluica6960
    @adrianluica6960 5 ปีที่แล้ว

    Thanks. Great video. Really helps allot. I had no idea how to calculate those angles. I was always wondering how on earth a job like this is done. Looks simple but when you start is clear that knoledge is needed.

  • @dahljerald2934
    @dahljerald2934 4 ปีที่แล้ว

    Video is well done. Very good explanation

  • @thomashakonsen3778
    @thomashakonsen3778 5 ปีที่แล้ว +2

    A very educational 2 part video. You made it very understandable. Thanks a lot. And just keep on dancing

  • @philippboetcher9959
    @philippboetcher9959 3 ปีที่แล้ว

    Brilliant!

  • @dominicauclair4026
    @dominicauclair4026 4 ปีที่แล้ว

    Love this 2 part demo! Kind of wish you also showed us some leg stretchers. I'll figure it out with what you showed.

  • @cobberpete1
    @cobberpete1 5 ปีที่แล้ว +1

    I think I will just invite you over to set up a Jig for me LOL. Thanks Chad.

  • @wb_finewoodworking
    @wb_finewoodworking 5 ปีที่แล้ว +1

    Chad, this video is outstanding. Now I can see how it all comes together. You worried me when you used the drill press because my cheap table top model would never work for a project like this BUT that jig is fantastic. It looks easy to make and use. Thanks as always. Now I just have to see when I can schedule making a bench into my plans for the upcoming year. It’s going to be a busy one.
    Merry Christmas and Happy New Year. Don Bullock, WB Fine Woodworking

  • @mardakworkshop4450
    @mardakworkshop4450 5 ปีที่แล้ว

    thanks man 👌👌👍🏻👍🏻😍😍

  • @shortliner68
    @shortliner68 2 ปีที่แล้ว

    I have never used my cheapy drill press much, but after watching this video realized the bed on it has a degree indicator for tilting. Just have to loosen a bolt underneath and tilt the zero point on the bed until it's inline with the degree of tilt needed. I was really surprised to see that feature on it.

  • @brucelouden8405
    @brucelouden8405 3 ปีที่แล้ว +1

    Very informative and thanks so much for posting this. Is there a written formula for the geometry equation?
    I've been trying to do symmetrical legs in the bottom of half round logs and it's a challenge.

  • @R2d2koko
    @R2d2koko 3 ปีที่แล้ว

    Thank you thank you thank you 💖💖 but what is that about the drawing in part 1 ? Just to find the angles ?

  • @frankroberts3868
    @frankroberts3868 6 หลายเดือนก่อน

    How did you arrive at rake and splay angle? Are they particular for the height of the project? And the what is the math for resultant line? Thanks.

  • @tazblink
    @tazblink 4 ปีที่แล้ว

    Thanks so much for sharing this video. Is there a formula that gives the length deferents for the front and rear legs? I am assuming that the rear legs are longer because of the 16 degree rake to get a level platform or chair seat?
    Also to get the leg to fit flat on the floor I would just cut the bottoms to the same splay and rake as the top right? This is my first woodworking project in 30 years just got a new saw and wanted to build a stand for it. Thanks again for sharing.

  • @scottlouis7785
    @scottlouis7785 5 ปีที่แล้ว

    good to know my way would have been trial & error, thanks

  • @albertoroman5124
    @albertoroman5124 2 ปีที่แล้ว

    Hola! Me encanta la geometría en carpintería.. aunque casi no entiendo el inglés me gusta ver tus vídeos.. te costaría mucho colocar sub títulos en español?

  • @majidalamri5328
    @majidalamri5328 4 ปีที่แล้ว

    Hi Chad,
    First of all, I’m a big fan of yours. But I have a comment and a question. Isn’t this a compound angle. I did it so many times before when I build stools. What I usually do it I tilt the drill press bed and the I use a sacrificial wood block to raise the piece then I have my compound. angel with no geometry and measurements.
    What do you think?!

  • @markcallahan3605
    @markcallahan3605 3 ปีที่แล้ว +2

    Hi Chad - Using the $1.00 protractor, I believe the correct sight angle to use for the rear legs (from your reference line) would be 90 - 34 = 56 degrees.

    • @shortliner68
      @shortliner68 2 ปีที่แล้ว +2

      Glad someone else noticed that, too! I was starting to get confused, especially looking at his front and rear sight lines drawn that are only a couple degrees different. I was planning on making a small chair that is only one degree different in the rake, resultant, and SL angles as his rear legs, and the sight lines on my sketch angled up more than his. Thought I was figuring the SL angle wrong.

  • @ahoramudanzas4265
    @ahoramudanzas4265 4 ปีที่แล้ว

    Que pena , no speack English, trate de entender al hacer , gracias muy útil.

  • @HippyRandallRev
    @HippyRandallRev 5 ปีที่แล้ว +1

    Have you broken your index finger on your right hand? Looks bent.
    Thanks for the video. Very informative.

    • @ChadStanton
      @ChadStanton  5 ปีที่แล้ว +5

      I cut my finger off in a car accident when i was 17. Doctor said i would lose 80% use of my whole hand. I only lost 50% of my one finger. NOTHING will hold me back.

    • @peterfitzpatrick7032
      @peterfitzpatrick7032 5 ปีที่แล้ว

      Chad... my girlfriend was with me 3 months before she noticed half of my left thumb was gone ! 😅
      I'm not sure what to make of that... 😔

  • @qerenyahu371
    @qerenyahu371 3 ปีที่แล้ว

    Its a process

  • @twoweary
    @twoweary 5 ปีที่แล้ว +1

    Great video Chad . Thanks for sharing that very interesting and useful information. Psst, hope Starrett didn't hear that a dollar protractor will work just fine . :-)

    • @ChadStanton
      @ChadStanton  5 ปีที่แล้ว +1

      Hahaha well i'm just being honest with folks. YOu don't need to spend a ton of money to do woodworking. Thanks for watching

  • @whatthefunction9140
    @whatthefunction9140 5 ปีที่แล้ว +2

    nice protractor chaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaad

    • @peterfitzpatrick7032
      @peterfitzpatrick7032 5 ปีที่แล้ว

      Santa has a nice nu keyboard in his sack for you Dylan.... I hope.. 😩