I agree with Ajit -- you are awesome. Really enjoy all your videos. So great to see people doing this hobby the ole fashion way -- building goodies at home. Take THAT Banna-rama hobby
@provideotube 4500Kv with the 64mm EDF is not suitable for 4S lipo. it will most likely to burn the motor. 3S lipo is more than enough. It will probably draw around 40 plus ampere so make sure the ESC is rated to handle at least 50 ampere. Cheers
Simple idea, but great, compact thrust vectoring device - thanks for uploading! Looking up the 'jet pipe', you have two turbo-props, but are these counter rotating, also, or do they both spin in the same direction?
Very Cool! Do you think that a quad copter using Coanda Thrusters at the corners would be a good way to get read of the props on a high powered U.A.V. ?
Dude, can you tell me what materials you used to build your plane? what did you use to control the thrust vector? what kind of remote controler was that? I want to try to build my own but don't know where to start...any help will help lol...thanks.
Great sense of humor Daniel---"I haven't named Deees Jet, Jet"!!! Brilliant, (and CHEAP) idea my friend, now if the US Govt. would design things this simple----, Ha! Gb bg
You can buy a "Grey-Type" of foam sheating in a LARGE bundle (40 sheets) for about $40.00 at a siding installation/supply Co. It's called "Underlayment", dims. are .226 X 24" x 48", A lot of "Foamies" for us "Homies" there!!
a 4s lipo will be more than enough, just make sure the motor and ESC are able to withstand the power of a 4s lipo battery and let it pick up speed on the runway before pulling up elevator Remember that sweepback wings (like on your MIG-15) do not like to fly at to low speeds.......... good luck. I hope you can make your plane fly.
I have a jet on 4500 KV 64MM, 9.6v NiMih at only 520 Grams. Problem is it doesn't pick up my jet due to its weight. Is the problem the battery I'm using or is it the EDF itself! Please Help, Thanks
Estimado Daniel Madrigal, eres lo máximo, que imaginación para construir, que padre, espero conocerte algún día. Yo soy el que quiere hacer la colección de oldies DC-3, DC-6 etc. saludos.
balsa is a nice material to build planes with ( I like balsa a lot) but it takes a lot more time and tools to build a plane and if you crash it is not as simple as putting a little hot glue to fix it : ) I know from experience : / I have some balsa planes but I only do scale flight with them : ) 2 electric and 1 nitro witch tomorrow will be the firs flight in 4 years I will try to get a video and post it here
Carnal si que les ganaste a todos los que e visto , siempre supe de estas aviones namas que nunca pense que asi se hacian, me voy aventar hacer uno aver como me sale, y si la ago enseñarle alos niños de mexico para que les guste las aviones y sea su paseon,
las maquinitas que mueven los alerones se llaman servos y los puedes conseguir en muchas tiendas en linea yo los compro en hobbypartz punto com o graysonhobby punto com los que yo uso son de 9 gramos a 22gramos
una pregunta como se llama el yeso que se usa para hacer las aviones , esque regrese a mexico y la verdad no se ni endonde comprrlo eske no quiero comprar el modelo de avión si no hacer lo de scratsh
I agree with Ajit -- you are awesome. Really enjoy all your videos. So great to see people doing this hobby the ole fashion way -- building goodies at home. Take THAT Banna-rama hobby
Maybe I need to stop thinking that my ideas are useless before trying them out. Great idea, great build.
There you GO!!!
Looks good Daniel nice job on the thrust vectoring unit you amaze me over and over with your builds great job!!
I love the flyboys theme! Thanks for this amazing idea!
Yessssssssss another homebuilder who uses peanut butter jar lids! I salute you! :D
Thanks for sharing Daniel. That's a clever set-up using common materials. :)
Great job, a little ingenuity goes a long way! Keep living LIFE to its fullest!
Great idea for thrust vectoring. I’m going to incorporate it into my Edf rocket.👍🏼
Dude, you are awesome. You jus inspired me to do away with the complicated control surfaces in my design. Thankyou.
Great piece of work! Thanx for explaining how you did it.
This video alone caught my attention!
Nice Job!!! Very creative.
It is great man! I'm going to make a TVC, and i was thinking if you considered the distance between the EDF and the tube edge, and then the nozzle.
Really great job! 👍
Nice idean Daniel. I'll have to find the flight video. Once again, nice build!!
great work. very good designe ..i cant wait to see it fly
10/10 for inginuity!
pro trick : watch series on Flixzone. I've been using it for watching loads of movies during the lockdown.
@Major Rudy yup, been watching on Flixzone for since december myself :D
@provideotube
4500Kv with the 64mm EDF is not suitable for 4S lipo. it will most likely to burn the motor.
3S lipo is more than enough. It will probably draw around 40 plus ampere so make sure the ESC is rated to handle at least 50 ampere.
Cheers
Muy original esa idea te felicito por tanta iniciativa
@DanielMadrigalC Its a kit version Mig 15 - with my own electronics? Do you think a 4s 14.8v lipo would be able to get this thing flying.
Holy Moly dude, you are crazy smart. How do you come up with this stuff?
Sweet design!
So simple.
Simple idea, but great, compact thrust vectoring device - thanks for uploading! Looking up the 'jet pipe', you have two turbo-props, but are these counter rotating, also, or do they both spin in the same direction?
Very Cool! Do you think that a quad copter using Coanda Thrusters at the corners would be a good way to get read of the props on a high powered U.A.V. ?
Dude,
can you tell me what materials you used to build your plane? what did you use to control the thrust vector? what kind of remote controler was that? I want to try to build my own but don't know where to start...any help will help lol...thanks.
You are an expert man
Great sense of humor Daniel---"I haven't named Deees Jet, Jet"!!! Brilliant, (and CHEAP) idea my friend, now if the US Govt. would design things this simple----, Ha! Gb bg
You can buy a "Grey-Type" of foam sheating in a LARGE bundle (40 sheets) for about $40.00 at a siding installation/supply Co. It's called "Underlayment", dims. are .226 X 24" x 48", A lot of "Foamies" for us "Homies" there!!
it's easy to fly you can adjust the travel on the trhust vectoring to low till you get used to it, I never put gyros on this one
Is that hard to keep under control? Have you tried gyroscopes in it?
that s genius man .great job.
You deserve waaaay more than 3,000 subs, you and your planes are awesome! :)
Thats awesome. I think I'm going to do this to my jet "jet" 😂😂😂
nice work!!!! can't wait for the flight! What types of flight times do u get with the 4s lipo?
most 64mm EDF need 11v a lipo battery will help with the weight ( what plane is it? the wing load will make a big difference too)
oye bro donde compras tu foam??eh andado buscando y solo no encuentro
Btw how does it look now sense you've had over a year to work on i bet you've improved it well.
Muy bien Daniel espero a ver que tal funciona en el campo de vuelo.
saludos
Great work!!!
Good job
Nice work...But now I want to see you fly it.
Brilliant - nice work!
really surerb idea thank you
Where do you get the materials for building the body parts ?
Pzl waiting for your response
The foam was purchased at a local hardware store and you can also try a School Supply store they have foam there with paper on it.
Sweet! Great build man.
You should put the screw heads on the inside, even grind them down for better flow...
great build............
Que tipo de insulation es esa?? La pregunta viene por lo flexible para hacer la sección donde alojas el motor
very nice
Cool plane dude!
a 4s lipo will be more than enough, just make sure the motor and ESC are able to withstand the power of a 4s lipo battery and let it pick up speed on the runway before pulling up elevator Remember that sweepback wings (like on your MIG-15) do not like to fly at to low speeds.......... good luck.
I hope you can make your plane fly.
Great video, great hack!
muy buen videos,, bueno estoy pensando en hacer uno, pensó en acerlo en depron de 3mm pero todavía no me lo he atrevido a empezarlo,,,
Thank you for this idea
Hey man are you making any new videos or you changed your hobby? I don't remember seeing any latest videos, what's up?
QUE BONITOS AVIONES TE FELICITO
Bravo hermano
todo es de unicel ??
Daniel, I thought Falcon should be the name of your jet just before you said it in your video! jb
I have a jet on 4500 KV 64MM, 9.6v NiMih at only 520 Grams. Problem is it doesn't pick up my jet due to its weight.
Is the problem the battery I'm using or is it the EDF itself! Please Help, Thanks
good job
sir how did you mount that motor inside a duct
around minute 4:04 you will se that it screwe in place on wood rails.
I meant a flat surface because that looks like it might add to much wind resistance and make it fly improperly.
Estimado Daniel Madrigal, eres lo máximo, que imaginación para construir, que padre, espero conocerte algún día. Yo soy el que quiere hacer la colección de oldies DC-3, DC-6 etc. saludos.
balsa is a nice material to build planes with ( I like balsa a lot) but it takes a lot more time and tools to build a plane and if you crash it is not as simple as putting a little hot glue to fix it : ) I know from experience : / I have some balsa planes but I only do scale flight with them : ) 2 electric and 1 nitro witch tomorrow will be the firs flight in 4 years I will try to get a video and post it here
@menteausente battery is from Hobby lobby they are $89.00 dollars on there website but I bought mine in the past SEFF for only $15.00 I bought two : )
Carnal si que les ganaste a todos los que e visto , siempre supe de estas aviones namas que nunca pense que asi se hacian, me voy aventar hacer uno aver como me sale, y si la ago enseñarle alos niños de mexico para que les guste las aviones y sea su paseon,
Muchas gracias por la respuesta, buscare el material. Saludos
Great Vid!!!
U R. Great guy
sure you will just have to let me know what plane so I can have an idea of building time and what power set up for it
me gusta tu idea
9years old OMG 😱
Can u make a video on reviewing your new f-15???please!!!
That f 18 tiger stripes ooooh man
dude your awesome,
great job!!
como hace para obtener el mecamismo de mover los alerones
where the f**k you bought that awesome battery??
Very nice job!!!
To bad it would mess up the foam if you put them in the side of the plane to have a level surface
las maquinitas que mueven los alerones se llaman servos y los puedes conseguir en muchas tiendas en linea yo los compro en hobbypartz punto com o graysonhobby punto com los que yo uso son de 9 gramos a 22gramos
would you sell the plane if you are how much would you sell it for
thank you:)
una pregunta como se llama el yeso que se usa para hacer las aviones , esque regrese a mexico y la verdad no se ni endonde comprrlo
eske no quiero comprar el modelo de avión si no hacer lo de scratsh
Nice!
Which servos did you use for this?
great!!
sorry not for sale
el avion es echo de un unicel llamado blue core echo por DOW
Daniel - can you build a plane for me if I pay for all the components and your time to do it ?
TurnerHuntOcean
wow
so how much you selling it for?
Trhust! lol