Peugeot 508 2019 noise in doorpanel - remove doorpanel

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.ย. 2024
  • I started getting irritated by a noise coming out of the left doors. Found the issue by removed the doorpanels.

ความคิดเห็น • 8

  • @AndreGomes-zp1ce
    @AndreGomes-zp1ce 8 หลายเดือนก่อน

    Hi did you have any Problem with your clips from amazon? On a peugeot dealership they are so expensive im thinking about getting some from amazon as well! Like the door rigity is the same or are they weak?

    • @tvp5985
      @tvp5985  8 หลายเดือนก่อน +1

      No problems, my thoughts are that they are the same. There is no reason (in my eyes) for such kind of item to buy original.

    • @AndreGomes-zp1ce
      @AndreGomes-zp1ce 8 หลายเดือนก่อน

      @@tvp5985 Thanks, in this case it’s for a 308 sw, but the clips are the same! I’m about to put sound insulation on the doors and I want to replace all the clips! I found them on AliExpress for around 22euros for 140clips where on a peugeot dealership here in Portugal 140 would be about 120euros! Thanks for the answer, and great video! Are you satisfied with your 508, I’m thinking about getting one for a second car!

  • @CupraBBD
    @CupraBBD 10 หลายเดือนก่อน +1

    How the car, can you review it

    • @tvp5985
      @tvp5985  10 หลายเดือนก่อน

      Not gonna give a full review, but in big lines a wonderful reliable car! 8speed automatic, average of 6.6 liters of fuel on 100km (1:15) drives very nice, low noise and rpm’s when driving on the highway. Automatic steering works also very well. Only downside for me is that the lane assist is quite heavy reacting. There is a button to turn it of but it’s not a permanent off. Nexttime you start the car the lane assist is on again. Had me a few situations cursing the system while overtaking.. again overall, I’m happy 👌😉

  • @charlesjones2014
    @charlesjones2014 ปีที่แล้ว

    How did you safely remove the window switch?

    • @tvp5985
      @tvp5985  ปีที่แล้ว

      Tools like you use for changing out a Smartphone screen. Plastic thin material would do the job. You could use something else if you like.

    • @charlesjones2014
      @charlesjones2014 ปีที่แล้ว +1

      @@tvp5985 I had tried those tools but wasn’t able to get anything plastic under the seam of the switch. If it worked for you, I’ll persevere! Cheers for getting back to me 🙏🏻