Bro I'm only a 12 years old boy who is trying to build his pc . Everything is done except inserting the SMP . Thank you for this video it really helped 🤗🤗
I have a question; I have a HP desktop MO1 and I’m going to install a EVGA - BA Series 500W but i don’t know if it will fit. If you might know, pls reply
Sir I brought my PC from relative and it was assembled by him only, from past few weeks it was shutting down automatically while working and PC was heating a lot, so I tried applying thermal paste and one additional fan, but it doesnt seemed differrence. I thought of removing all connections from the motherboard and re-assemble it, but It was very difficult to unplug the ATX 12 volts pin, it wasn't coming, I tried many ways to remove it but it was stuck very hard and Finally I decided to brake it off the pin which came from SMPS and put another, my mother board has 8-pin slot and the pin which was plugged to it was 4-pin and finally I broke the 4-pin and removed it from motherboard. And now my doubts are:- 1) Why wasn't the pin coming out, is it due to any burns? 2) Why was my PC heating a lot, is it due to less power from SMPS? 3) Now should I change whole SMPS or just a pin? 4) If I change pin should I use adapter? 5) What if the slot is burnt on motherboard? It would be so helpful if you have solutions for me...🙏🙏🙏, and I am not a gamer, I use my PC for editing and I use softwares such as after effects, premire pro etc. I have 8GB ram, Nvidea zotac 1GB Graphics, AM3+ processor, AMD motherboard, and zebronics SMPS. . . ANYONE Ping me if you can help me 7026655068 Or comment your phone no. I will contact you. Please, it would be so helpful if anyone gives solution. Thankyou so much.
What do you mean by break down? As in, can't turn on? If that's the case, then yes. A power supply provides power to the computer. If the power supply isn't functioning properly, then the computer probably won't turn on.
Mine just turns off, i mean there's no "shutting down" in the screen. The monitor and pc just shuts off instantly. Is the PSU the problem? I'm skeptical in spending money cause I might be wrong
mostly there are all atx but for older case style (psu is on top with a small rear fan while newer are at the bottom with a 120mm fan) you also have slim psu but this is quite specific
great info, but the back music is so annoying.
Bro I'm only a 12 years old boy who is trying to build his pc . Everything is done except inserting the SMP . Thank you for this video it really helped 🤗🤗
Finally a helpful guide... Thank you!
I know right
woah this looks really similar to my pc
thanks
your pc is an antiquity? 😂😂
@@Underpressure11My Pc looks same like this one but that guy is a monster
Jeez that music is....idk...90s.
wow thats identical to my pc what power supply are you installing on this might buy the same 1
Best video I found... thank you sir
Thx for the guide! Now that i know how to remove the power supply from the case i just need to replace it (power supply broke)
I let my PSU be replaced in a PC shop, but he took like an hour to do that. What was he doing for such a long time?
Probably the minimum time he can charge is an hour so he just took his time.
My psu got burnt so I gotta replace a new one, thank you for the tutorial
Same, mine burnt 7 months ago and now I found an unused pc in the attic I decided to replace the PSU od my current PC.
Fine got ruated somehow idk how and it burned
I have a question; I have a HP desktop MO1 and I’m going to install a EVGA - BA Series 500W but i don’t know if it will fit. If you might know, pls reply
I have the same problem😭
hey did it fit? if no what did you do
Sir yung bago kung biling PSU walang ATXPWR2 cord pwede ba magawan to ng paraan?
Sir I brought my PC from relative and it was assembled by him only, from past few weeks it was shutting down automatically while working and PC was heating a lot, so I tried applying thermal paste and one additional fan, but it doesnt seemed differrence. I thought of removing all connections from the motherboard and re-assemble it, but It was very difficult to unplug the ATX 12 volts pin, it wasn't coming, I tried many ways to remove it but it was stuck very hard and Finally I decided to brake it off the pin which came from SMPS and put another, my mother board has 8-pin slot and the pin which was plugged to it was 4-pin and finally I broke the 4-pin and removed it from motherboard. And now my doubts are:-
1) Why wasn't the pin coming out, is it due to any burns?
2) Why was my PC heating a lot, is it due to less power from SMPS?
3) Now should I change whole SMPS or just a pin?
4) If I change pin should I use adapter?
5) What if the slot is burnt on motherboard?
It would be so helpful if you have solutions for me...🙏🙏🙏, and I am not a gamer, I use my PC for editing and I use softwares such as after effects, premire pro etc. I have 8GB ram, Nvidea zotac 1GB Graphics, AM3+ processor, AMD motherboard, and zebronics SMPS.
.
.
ANYONE
Ping me if you can help me 7026655068
Or comment your phone no. I will contact you.
Please, it would be so helpful if anyone gives solution.
Thankyou so much.
Did you solve the problem? Im having a problem right now with this
Is it always a broken psu causes the computer to break down??thanks alot
#respectpost.
What do you mean by break down? As in, can't turn on? If that's the case, then yes. A power supply provides power to the computer. If the power supply isn't functioning properly, then the computer probably won't turn on.
Mine just turns off, i mean there's no "shutting down" in the screen. The monitor and pc just shuts off instantly. Is the PSU the problem? I'm skeptical in spending money cause I might be wrong
@@lambsauces It’s the psu for sure
@@etherious5957 for me also same problem what to do ? And how much cost
@@pravenudayakumar8192 take out the psu, replace the psu with a different one. Put the same wires in the same place.
I try to change capacitor gone wrong short now i already order new power box ATX type are all same how do right way install it please help
How do i know which power supply to buy
mostly there are all atx but for older case style (psu is on top with a small rear fan while newer are at the bottom with a 120mm fan) you also have slim psu but this is quite specific
The vocal at the beginning reminds me of kate bush
straight to the point
Thanks this helped alot
Nice song what's the name?
Thank You Very Much!
🙂🙏
good thing I watched this just incase, I was gonna do something wrong
song name ?
Bro how many ruppes is power
Awesome
Give me your smps link
Music needs a bassline
I thought the same thing too, it sounds very dry without it and it's kinda essential to have.
@@bakerhalt yeah it needs a deep sound
Tha music! Was crazzzyyyyy gayyyyy
So are you
Yed
The song 😮😮
My 8 pins is hard to remove! Ahahaha
What's the song
My music
Thanks.
Song to acha laga lodu
Okay tutorial, god awful music.
Background music is 🤮🤮🤮
both smps are waste
I hate when music is added to help videos......
A help video with only music? No narration as to what they are doing and helpful tips? Nonsense and useless!
Annoying background music
you are not watching the clip because of the music