The new motor sounds really sharp. Those are capacitors connected to the motor which stores a tiny charge to help out the motor and also keeps the voltage more steady along with other benefits. Some good ESC have a big cap pack. Thanks for sharing. Worth the $20. 👍😀
Nice run. Those are disk capacitors. They are there to keep the arcing noise from the brushed out of the receiver. Brushed motors are pretty noisy and that could be part of your range issue. You could try installing ferrite beads on the motor wires. The disk capacitors reduce the amount of noise generated but if there is a little still there the motor wires act like antennas and transmit the noise. It’s like driving under power lines when you listen to an AM radio signal and the static drowns out the radio station. The ferrite beads suppress the noise so your receiver can hear your transmitter farther. Cap packs are a completely different thing and they go as close to the ESC as possible to help with voltage sag when you punch the throttle really fast.
Huh, a 3s lipo on a brushed motor? Is there a special ESC need for? Pleas tell me :-) nice video, it sounds it runs brushless! Nice car by the way, wich brand?
The RC is ECX and the ESC is the Dynamite 60 amp ESC and it is 3s compatible but in order to use 3s you need a 550 brushed motor not a 540 brushed motor or you will have problems but with a 550 your good to go.... Yes just as fast as my brushless RCs no joke
@@gideondroog1990 you could afford brushless bro just not at the moment but one day you have a brushless RC. But until then just buy a Dynamite 60amp ESC and you will be doing big things
@@epicstrengthinsanity1235 you can have a lot of fun with a RC car that is brushed as long as you make sure that your escs is 3s and 2s and you also need to make sure you're using a 550 motor if you are using a 3s battery
@@MightyistheRCGamer thank you that’s help me a lot. Lol. the stock esc I have in crawler can run 3s and motor is 540, do you think it’s will fit 550? Thank you
I think you mean flyshy... I don't care to much for their products don't get me wrong they work great but the antenna must be up very high for it to work
Never heard of flyshy lol but a bunch of people use them and the higher end models as well at the huge indoor carpet track we race at we run oval and road course. But I could see outside it is a problem. I use spectrum and will never go back I love spectrum in my rc race cars and pan cars and my big rc planes
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
The new motor sounds really sharp. Those are capacitors connected to the motor which stores a tiny charge to help out the motor and also keeps the voltage more steady along with other benefits. Some good ESC have a big cap pack. Thanks for sharing. Worth the $20. 👍😀
Nice that runs really good on 3s I hope to see more from this rc thanks for sharing 👍
It's not the Motor it's the Dynamite ESC works very Strong with all motors but the best on a 550 on 3s
YeA was thinking about getting one of them esc to run a 3s battery on my 550 124018
@@philiplibby7536 The ESC is kinda pricey but worth it to be able to use 3s
The dynamite esc is the way to go hands down love mine in my rc oancars that we got to run brushed motors in
I was wondering how the motor preformed. Thanks for sharing
Nice run. Those are disk capacitors. They are there to keep the arcing noise from the brushed out of the receiver.
Brushed motors are pretty noisy and that could be part of your range issue. You could try installing ferrite beads on the motor wires. The disk capacitors reduce the amount of noise generated but if there is a little still there the motor wires act like antennas and transmit the noise.
It’s like driving under power lines when you listen to an AM radio signal and the static drowns out the radio station. The ferrite beads suppress the noise so your receiver can hear your transmitter farther.
Cap packs are a completely different thing and they go as close to the ESC as possible to help with voltage sag when you punch the throttle really fast.
hey man hope you doing well, what esc is it exactly?
Huh, a 3s lipo on a brushed motor? Is there a special ESC need for? Pleas tell me :-) nice video, it sounds it runs brushless! Nice car by the way, wich brand?
The RC is ECX and the ESC is the Dynamite 60 amp ESC and it is 3s compatible but in order to use 3s you need a 550 brushed motor not a 540 brushed motor or you will have problems but with a 550 your good to go.... Yes just as fast as my brushless RCs no joke
@@MightyistheRCGamer So cool! I can't afford brushless so this will be perfect! Thanks buddy!👍🔥🔥🔥🔥🏎️🏎️🏎️🏎️🏎️
@@gideondroog1990 you could afford brushless bro just not at the moment but one day you have a brushless RC. But until then just buy a Dynamite 60amp ESC and you will be doing big things
what were the motor temps after running it?
ae wadap just here cheked out ur video perty koo
Of it for a brushed system done mine on 4s didn’t end to well
Sorry about that... it happens to the best of us
Niice Setup
Hello bro, do you think it’s safe on 40a esc? Thank you for reading this
It will be more than fine considering it can handle more power
@@MightyistheRCGamer thank you very much, I’m new to rc car hobby lol.
@@epicstrengthinsanity1235 you can have a lot of fun with a RC car that is brushed as long as you make sure that your escs is 3s and 2s and you also need to make sure you're using a 550 motor if you are using a 3s battery
@@MightyistheRCGamer thank you that’s help me a lot. Lol. the stock esc I have in crawler can run 3s and motor is 540, do you think it’s will fit 550? Thank you
@@epicstrengthinsanity1235 it should. I always change out my 540 motors for 550 always so I can use 3s
how long did the motor last
Still Running Strong
How did it hold up
It's still running bro
But if you want to use 3s I would suggest you get the Black 550 brushed motor because they are much stronger
@@MightyistheRCGamer yeah just looking for brushed replacement that can handle abit of abuse just on the 2s
Decent its just for my smallest 1/18
My stock burned out on 4000mah 2s
I don’t think it liked the hour run time
@@orangeorange9353 I will send you a link...
Man there is nothing wrong with frysky
I think you mean flyshy... I don't care to much for their products don't get me wrong they work great but the antenna must be up very high for it to work
Don't get all mad bro... because I am giving away a Flyshy Transmitter on my channel soon
Never heard of flyshy lol but a bunch of people use them and the higher end models as well at the huge indoor carpet track we race at we run oval and road course. But I could see outside it is a problem. I use spectrum and will never go back I love spectrum in my rc race cars and pan cars and my big rc planes