i have two 1/15 scale new brights that hhas the internal battery which is a 2 cell 6.4 volt . it charges with a usb port. when i plug it in theres a red light on the bottom of the vehicle that light red when charging , when its done it goes out . but now when i plug it in the light blinks red would you know the problem?
its too much voltage. Just get a new pack and cut the wires to replace the connector with yours. Many batteries on ebay www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR3.TRC2.A0.H0.X4.8v+battery+pack.TRS0&_nkw=4.8v+battery+pack&_sacat=0
Cicha Vlogs yes on the green new bright batteries but it has a notch at the top that needs to be filled down to fit. Then you will risk the motor overheating.
hi i just bought a 4.8v 700mAh Nicd rechargeable battery but i intend to use only maybe 2 to 3 months later can i just leave it as it is then only charge it after 2 to 3 month later. will the battery spoilt? And can i used a handphone usb charger to charge example samsung charger ? thanks
NiCd batteries don't spoil if completely drained only LiPo batteries spoil. I would not charge it with phone charger because the phone charger will not stop when the battery is full and it might explode.
i recently got a 12.8 volt newbright battery and charger from Ebay. when i charged it the battery got very hot and i burned my finger when unplugging it.
sorry to hear! I had defective new bright truck and they wanted me to mail it to them at my cost so instead i just bought a new one at walmart and returned the defective one to walmart for full refund.
Uncle Gus I got it as a Christmas present a few years ago from my Dad, but since he bought it before Christmas, and it stopped working at the end of January, it was technically over the 1 month warranty, so nobody did anything, and we just ended up getting rid of it. (Nobody as in New Bright, or Walmart)
Hey I got a RC truck and when I try to charge the battery tru a small usb adaptor, it lights a red light, than it turns off and nothing happens anymore.. any idea?
Hi one of my RC cars just stops randomly and I have to switch it off and the on but it keeps happening the RC is a terra climber sorry I and posting this 6 years later but I really need your help please respond!!!
I have a tyco tantrum, I bought an original tyco battery off of Ebay and charged it and it's still dead. I even charged it overnight and still the same, how do I revive it.
If it fits in a new bright 9.6v charger or a Tyco terrain twister charger it may jump start the charging for 5 minutes then charge in tantrum charger for the rest of time but be warned it may explode when charging in higher voltage charger.
That charger is a 7.2 V charger you need at least 9.6 to fully charge it and I have that thank you if I did not know to call new bright they offered a replacement battery and charger free of charge I really have to thank you I called new bright offered me in replacement battery and charger free of charge !!
Maybe the orginal 4.8v pack is old and weak? if you get a new one it may run better? You can't run a LiPo because it doesn't have a low voltage cut off. You have to run NiMh you could try 6v NiMh but may fry the board or motor.
I shaved a lot of the 9.6v nipple off to fit into the 12.8v lithium ion battery pack charger . When I put the 9.6v lithium ion battery pack into to 12.8v lithium ion battery pack charger it blinked red. Is it supposed to do that?
It also made this sound like a timer but when I put my 12.8v lithium ion battery pack into the 12.8v lithium ion battery pack charger to charge my grave digger it doesn't do that
I believe you are giving it a type of a jump start effect with the stronger charger. awesome dude
some nice tips my friend have fun RCing
Nice it worked for me
i have two 1/15 scale new brights that hhas the internal battery which is a 2 cell 6.4 volt . it charges with a usb port. when i plug it in theres a red light on the bottom of the vehicle that light red when charging , when its done it goes out . but now when i plug it in the light blinks red would you know the problem?
Luther Hite sorry I don't have one with internal battery and can't think of a way to fix. Did you contact new bright?
newbright.com/contact/
They're fixed lithium cells soldered to the receiver board, take them out and run a 7.4v 400mah 2s lipo, this will require soldering...
Does the light on the new bright turn off when it’s fully charged??
Yes
@@UncleGus the light on my 12v new bright charger isn't even turning on, pop it in a new bright truck.. Nothing
I need one charger same like what is their in our video where can I get it in vizag please say!
I got a question how do I charge a fastlane RC 9.6v rechargeable ni-mh battery pack
Hi I have a my toys rc car battery but the battery charging plug is loose and won’t charge how should I fix it or change it
If it's the new USB charging type it's probably worn out connection plug.
I have a new bright rc that charges and works but when it goes off the chargerbit doesn't work at all? Is there anyway to fix?
Is there a way I could tell how much voltage it can handle on the board somewhere
Sorry I don't know.
how can i use a 7.2v battery pack in place of a 4.8v battery pack for a rc excavator?
its too much voltage. Just get a new pack and cut the wires to replace the connector with yours. Many batteries on ebay
www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR3.TRC2.A0.H0.X4.8v+battery+pack.TRS0&_nkw=4.8v+battery+pack&_sacat=0
Will the 12.8v go into a 9.6v rc
Cicha Vlogs yes on the green new bright batteries but it has a notch at the top that needs to be filled down to fit. Then you will risk the motor overheating.
How long can you charge the new bright 6.4 v
smart chargers don't charge batteries below a certain voltage cuz they don't want them 2explodde
Thanks for the info and thanks for watching!
explode
Some do. It's called a soft start
hi i just bought a 4.8v 700mAh Nicd rechargeable battery but i intend to use only maybe 2 to 3 months later can i just leave it as it is then only charge it after 2 to 3 month later. will the battery spoilt? And can i used a handphone usb charger to charge example samsung charger ? thanks
NiCd batteries don't spoil if completely drained only LiPo batteries spoil. I would not charge it with phone charger because the phone charger will not stop when the battery is full and it might explode.
thank you
Were did you get the new charger
i recently got a 12.8 volt newbright battery and charger from Ebay. when i charged it the battery got very hot and i burned my finger when unplugging it.
I had a Scorpion that quit working just under 1 month. I contacted NB about it, and they did nothing.
😐
sorry to hear! I had defective new bright truck and they wanted me to mail it to them at my cost so instead i just bought a new one at walmart and returned the defective one to walmart for full refund.
Uncle Gus I got it as a Christmas present a few years ago from my Dad, but since he bought it before Christmas, and it stopped working at the end of January, it was technically over the 1 month warranty, so nobody did anything, and we just ended up getting rid of it.
(Nobody as in New Bright, or Walmart)
I wonder if the 9.6v charger will charge a 12.8 battery?
I have a new bright 9.6v battery and lost the adapter. HELP!
Try to buy used one off ebay.
thank you for sharing this with us.
Thanks for watching!
Hey
I got a RC truck and when I try to charge the battery tru a small usb adaptor, it lights a red light, than it turns off and nothing happens anymore.. any idea?
U shorted ur outlet or battery
Same thing is happening to me
If a popping sound was there u shorted something
@@bigmac6303 the idea is that it's charging.. just not showing it.. that's akward
@@HightLink if the light popped that means it overcharged enough to break the LED
i have 4.8V battery pack with rock crawler.i had to charge it by mobile phone charger.how to know the fully charging time for it gone??
Hi one of my RC cars just stops randomly and I have to switch it off and the on but it keeps happening the RC is a terra climber sorry I and posting this 6 years later but I really need your help please respond!!!
I have a tyco tantrum, I bought an original tyco battery off of Ebay and charged it and it's still dead. I even charged it overnight and still the same, how do I revive it.
If it fits in a new bright 9.6v charger or a Tyco terrain twister charger it may jump start the charging for 5 minutes then charge in tantrum charger for the rest of time but be warned it may explode when charging in higher voltage charger.
@@UncleGus I did that now my 9.6 got fried and it won't change the battery. Idk I'm gonna have to get a new one.
Where can I get those green batteries??
Daisy ChaveZ try to contact new bright for warranty replacement otherwise search on eBay.
Well he Answerd my question
no
Hey I have a 6.4 and I don't know how to take it ourlt of the charger
That charger is a 7.2 V charger you need at least 9.6 to fully charge it and I have that thank you if I did not know to call new bright they offered a replacement battery and charger free of charge I really have to thank you I called new bright offered me in replacement battery and charger free of charge !!
If we take out the green chip of lithium lion battery then do it work
RUKMAN PURI what green chip?
In some remote control car lithium lion battery is used and that battery contains a green chio attached in it
Hello sir i have 1000mah and 8.4v battery. But i don't have charger. So you will Please prepare a Video on this. My content. Sir
I have the opposite situation I have the 12.9v doing the same thing
Ok thank you
Thx
Mine terns red and buzzes
if the new bright charger is buzzing I think its defective. you should call their customer service.
can you give me a new bright please
TV remote mobile ka battery Kaise thik karte hai
What?
I got a new bright and my charger and battery stop working
4100 edgewood f 89
how long should i charge the 6v battery for my rc car?? pls answer
arkielle macayanan once the batter is on fire it should be fully charged.
@@heroicuser8520 that's only 99% it only reaches 100% after you throw water on it to put it out whilst still plugged in.
if the charger doesn't have a charge light on it maybe only 6 hours is good enough.
Ok
Get a new battery pack? Cut the wires for what? The connector is right I just think the 4.8 ain’t enough power
Maybe the orginal 4.8v pack is old and weak? if you get a new one it may run better? You can't run a LiPo because it doesn't have a low voltage cut off. You have to run NiMh you could try 6v NiMh but may fry the board or motor.
Cell charger ko buy kese kare
where can you buy tonka xd
david savelyev you can't but any 9.6v charger with tamiya connector can charge it
ok
thanks
I shaved a lot of the 9.6v nipple off to fit into the 12.8v lithium ion battery pack charger . When I put the 9.6v lithium ion battery pack into to 12.8v lithium ion battery pack charger it blinked red. Is it supposed to do that?
yes it blinks red while its charging then should go green when its charged.
It also made this sound like a timer but when I put my 12.8v lithium ion battery pack into the 12.8v lithium ion battery pack charger to charge my grave digger it doesn't do that
When I charge my 1/8 scale grave digger it doesn't blink red it's solid red and when it's done it blinks green and it doesn't sound like a timer
maybe your 9.6v pack is no good anymore. Does it charge at all in the 9.6 charger?
I've had the 9.6v lithium ion battery pack for 3 years and I don't have a 9.6v lithium ion battery pack charger
I want some
charger
Please reply early
Porfa
Buy kese kare
Give me battery
I lost it
My adress
Soy un niño
fake
what is?