Why is my 12V ne555 input light getting very hot even though I tested it with 1 Led? Change the test to ne555 drive mosfet, ne555 is still hot as before.
@@creativechannelpro371 I want to use it for this circuit on a motorbike. I used a 12V 8A battery to test it. I gave ne 555 to drive a mosfet irlb3034 ic 555, it's still hot, how do I fix it?
bro if you buy you save your time if you want some interesting try 1.5 volt joule theif it increase volatages but with mili amp to small current value Find on my channel joule theif thanks for comment friend 😊😊😊 i already try many times to make 555 ic step up booster but fail i don't know why
Sir please make a 12v input and 12v output 1 layer touch sensors for 12 v LED light using 555 ic sir only single touch wire not 2 wires only 1 wire to touch to on and touch to off led light please let make it sir Nhi ho tho Sir only you Sand me the circuit diagram 😑😑😥😥🇮🇳🇮🇳🇮🇳
So you copied the same circuit everyone done, Why not step it up with SMD resistor and capacitor. I would like to see a compact version of this circuitry and wrapped in a heat shrink tube.
Bro i not have smd pcbs and components bro Sorry Bro i try my best to make video explainable you can see my circuit diagram bro i make circuit diagram easy for beginners Professional peoples see circuit and convert it into smd pcb version Bro i hard work on every video uploaded on my channel My channel earning is not enough only 20usd per month bro
@@creativechannelpro371 what is with the bro? All I asked is to step it up. Are you not a pro, you claim you facilitate for beginners... $20 a month can increase if you take the same project and differ from others. There is about 20 led flip flop videos doing the same exact thing. I'm not calling you an amateur but if you want more than $20, spice it up🤑👍
Nice video with clear circuit diagram
🥰thank you so much
Hi💯💫
very good diagram.thanks👍🙏
from IRAN💗
O Thanks My Dear ☺
Доброго времени суток. Можно регулятор тока подсоединить?
Заранее спасибо за ответ.
Lk 17 nice
Thank you so much
Nice work bro .
Thanks My dear
funciono gracias desde Lima Peru va para las luces de mi tren a ESCALA
Very nice Sir very very thanks sir
Welcome bro😄😄😄😊😊😊
@@creativechannelpro371 Sir please let make a 12v input and 12v output LED cheser using only CD 4017 IC please sir make it
Kya hum pilter module TEC home per bana sakty ha kya
Nahi bro boht mushkil ha us maa kaafi types ka materials use hotay ha jo markets ma available nahi hotay
I was looking for an open garage door alarm. I think this is just the thing. ty
Bhai led ki speed badhane ke liye capacitor change karna padhega
Hello Brother, have you ever tried a 10-30v 600watt flasher 2 or 4 channel. How would you go about doing it.
Sir please can you make a thermoelectricooler TEC pilter module at home
Bhai buy kar lo apna time waste na karo iss na kaafi different types ka materials use hotay ha jo market ma available nahi hotay
OK sir
Sir please kan you make a sharpy beem rotating LED light with sky Ray RC control at home
need to so advance😊😊 sorry bhai
@@creativechannelpro371 Sir Please Make A 12v Input Or 12v Output 10 LEDs Chaser Using CD4017 ic Only.
@@creativechannelpro371 please please make sir 12v led chaser
Out put kitana aarha hai muze out put 6 volt chaye
Why is my 12V ne555 input light getting very hot even though I tested it with 1 Led?
Change the test to ne555 drive mosfet, ne555 is still hot as before.
Use low amp current
Your power Supply rating
@@creativechannelpro371 I want to use it for this circuit on a motorbike. I used a 12V 8A battery to test it.
I gave ne 555 to drive a mosfet irlb3034 ic 555, it's still hot, how do I fix it?
8 AMP Too much bro you need to reduce amp
You can Add Resistor on + positive point like led. And use at least 10K Resistor check if still too hot increase the resistor value.
Good good 👍☕
Thanks bro
hello does it work with a 9V battery and a 20 led strip on each strip?
No sir it's not enough
@@creativechannelpro371 If using 12v battery, would 12v be enough for two sequences of 20 LEDs?
Maybe bro If current amp output is good
V V V nice bro
Thanks bro and congratulations for 1000subs keep it up😊😊😊
Shall I use 12V ,7Ah battery
Excuse me, its okay to use 3v led?
Yes dear but input 5v check My other videos on this topic
👍👍
Blinking speed ko tez kaise kru??
Change the Value of Resistor
100 K resistor value change decrease or increase change flashing rate
Is nice
Thanks bro
Capacitor,register kitne VAT ke Lena chahie
Koi Bhi chalay ga any watts no issue Capacitor 10uf volts jitnay marzi ho
Sir
Can we use 24v for the same circuit
24 is too much IC may blown
How can use this circuit on 24 volt dc kindly explain
If i want low speed flashing how can
Teşekkürler
Dear can you comment in english
why when I try, doesn't work?
Dear check circuit again
Klo pake potensio gimna
Dear translate english
Sir please make a stepup boostr module at home 2v to 12v convert circuit using 555 ic please sir please make it 😥😥😥🇮🇳🇮🇳😑😑😑
Bro 555 ic need at least 3.7 volt to run you buy step up booster module
@@creativechannelpro371 OK per Kya bana nhi sakty Kya hum ager bana sakty ha tho please sir bana tho Sir
bro if you buy you save your time if you want some interesting try 1.5 volt joule theif it increase volatages but with mili amp to small current value Find on my channel joule theif thanks for comment friend 😊😊😊 i already try many times to make 555 ic step up booster but fail i don't know why
Kalo pake potensio gimna kak
Hi bro can you translate comment in English
II can not speak English
how do you use the potentiometer?
I from Indonesian
🙂no problem bro
Sir can you please make a 12v input and 12v output 10 LED cheser using CD 4017 only please sir make it sir please 😥😥😥👍👍👍🔄
Bro lockdown ki wajah sa available nahi haa cheezay jb milay ga components ma zroor try karo ga
@@creativechannelpro371 OK sir
Ok saya bisa makasih
Sir please make a 12v input and 12v output 1 layer touch sensors for 12 v LED light using 555 ic sir only single touch wire not 2 wires only 1 wire to touch to on and touch to off led light please let make it sir
Nhi ho tho Sir only you Sand me the circuit diagram 😑😑😥😥🇮🇳🇮🇳🇮🇳
Bro whatsapp me +601169439048
@@creativechannelpro371 sorry WhatsApp nhi Kar sakta aap project bana tho
So you copied the same circuit everyone done, Why not step it up with SMD resistor and capacitor. I would like to see a compact version of this circuitry and wrapped in a heat shrink tube.
Bro i not have smd pcbs and components bro
Sorry
Bro i try my best to make video explainable you can see my circuit diagram bro i make circuit diagram easy for beginners
Professional peoples see circuit and convert it into smd pcb version
Bro i hard work on every video uploaded on my channel
My channel earning is not enough only 20usd per month bro
Bro get circuit diagrams from google😄
Bro request please support me and watch my videos😄😊
@@creativechannelpro371 what is with the bro? All I asked is to step it up. Are you not a pro, you claim you facilitate for beginners... $20 a month can increase if you take the same project and differ from others. There is about 20 led flip flop videos doing the same exact thing. I'm not calling you an amateur but if you want more than $20, spice it up🤑👍
Thanks bro i try more better next time😊😊😊 You are right bro
I've seen your other videos as well as this one, if you want to see other great 12 volt videos please check out our page.
Brother i visit and sub you nice great content
Please reply
Loka da time waste krda pya j tainu kakh v ni aunda te tu ki samjhda lokan v ni kuj ni aunda teri bhul aa