Tekla Structures 2020 - Working with Base points

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ธ.ค. 2024
  • Let’s take a look at how to work more efficiently with base points in Tekla Structures. We’ll demonstrate the importing and exporting of a reference model in an IFC format, learn how to refresh an inaccurate reference model sitting far away from the origin and how to find base points coordinates in the IFC file.
    Learn more about base points: bit.ly/3vcDAPS
    Subscribe to our channel:
    www.youtube.co...
    Follow us on social media:
    LinkedIn: / trimble-tekla-uk
    Facebook: / tekla.structures.uk
    Twitter: / trimble_teklauk

ความคิดเห็น • 10

  • @richardkelsey3956
    @richardkelsey3956 2 ปีที่แล้ว

    As a company we don't use Tekla but to coordinate IFC's using Navis or Solibri the Tekla IFC output very rarely aligns and it wastes a lot of time trying to get this to work, are there any tips to make sure alignment is achieved. We cannot Clash detect unless they align. Any Help would be appreciated.

  • @frankberns3532
    @frankberns3532 3 ปีที่แล้ว +2

    In order not to do this kind of action, the client will have to share the correct information. so that the Tekla user can easily and unambiguously export his model. Nowadays you do not bring the steel profiles by horse and carriage. Don't make things difficult for each other and share the RIGHT information. this also makes it easy to coordinate.
    Om dit soort acties niet te doen, moet de opdrachtgever de juiste informatie delen. zodat de Tekla-gebruiker zijn model gemakkelijk en ondubbelzinnig kan exporteren. Tegenwoordig brengt u de staalprofielen niet meer met paard en wagen. Maak het elkaar niet moeilijk en deel de JUISTE informatie. dit maakt het ook gemakkelijk om te coördineren.

  • @petrcervinka2738
    @petrcervinka2738 2 ปีที่แล้ว

    Hi, thanks for useful information in the webinar. One question - is possible to influence also agles around next axis? Now I see taht anoly angle around Z-axis is possible to set. What about X- and Y- axis? We are using Tekla for modeling of steel bridges and this wouldb be very helpful.

  • @oldplayer8025
    @oldplayer8025 3 ปีที่แล้ว

    so you're actually moving the grids to the IFC coordinates?

  • @JA-uf5rb
    @JA-uf5rb 3 ปีที่แล้ว

    how can I move tekla basepoint to my model origin instead of changing the model coordinates?

  • @gianlucatodeschini7091
    @gianlucatodeschini7091 3 ปีที่แล้ว

    Good presentation. Only one thing: it seems the the angle respect to the North that Tekla is asking should be the complementary respect to the one picked and not iterative (I think iterative could be x,y or North East coords). Perhaps, in order to avoid iteration, in the IFC files opened should be clear the logic of creation of the base plate in order to pick exactly the coordinates of the base plate itself.

    • @thatguythattalksabouttekla680
      @thatguythattalksabouttekla680 3 ปีที่แล้ว +1

      You are absolutely right Gianluca! I realized it later on and debated it live during the Q&A which is not posted here.

  • @biri308
    @biri308 3 ปีที่แล้ว

    Muy buen tema, bravo! U xplain very well, although i don't speak much english.

  • @tgcmlm
    @tgcmlm 3 ปีที่แล้ว

    You don't have to iterate the angle. You just measured the wrong one.

    • @thatguythattalksabouttekla680
      @thatguythattalksabouttekla680 3 ปีที่แล้ว

      Absolutely right you are George! Realized that later on and acknowledged it during the live session. Hope you found the video interesting!