After using your bolt cutters for a while they get misaligned and don't cut as well. This video will show you how to adjust the alignment to have them cutting like new.
I bought a 12 inch cutter from Harbor Freight. I used it like a maniac for two days. Then, well, it lost its chopping power. But this video explains how to fix it. It's a great help.
The bolt under the adjuster should be loosened before you turn the adjuster bolt, because it locks in the adjustment when it is tight. Then tighten it up after your adjustment. It will keep you from having to twist the adjustment so hard.
hola muy bueno el video tengo el problema que se desalinea las punta o cuchilla y si lo dejo medio flojo para poder abrir se desalinea y si lo apretó mucho no puedo abrirlo no encuentro la solución
I have a vintage pair of HK Porter number zero, and number 14 cutters I’m going to restore. And how exactly do I adjust the colors on those older ones?
I know this is an old video but I have to tell you, you are using the wrong tool, to cut your spoons. You need a sheet metal shear. The spoons are a little thicker than what you may consider sheet metal but that is what it is. Bolt cutters are not made to cut sheet metal, that is why you are having problems, with them. Specifically, you want a bench mounted, long arm, sheet metal shear. 😁✌🖖
People bad mouth social media but I have learned to do and fix so many things on TH-cam. Saved money and a lot of frustration!!! Thank you!!
Thank you so much for helping me adjust my bolt cutter.
Was searching all over for a video and found you. Thank you for helping me fix my gap problem
Thank you....Buying bolt cutter few days ago, and just saw your video....
Bought a pair of bolt croppers with 5 points of adjustment, and you just saved my sanity.
Thanks for putting this online!
Thank you. I have an Anvil 14" that wasn't cutting as cleanly as it used to, this fixed it.
i have the same cutters and needed that exact info today. Many thanks for helping me out.
Exactly what I'm looking for. Thank you!
I bought a 12 inch cutter from Harbor Freight. I used it like a maniac for two days. Then, well, it lost its chopping power. But this video explains how to fix it. It's a great help.
The bolt under the adjuster should be loosened before you turn the adjuster bolt, because it locks in the adjustment when it is tight. Then tighten it up after your adjustment. It will keep you from having to twist the adjustment so hard.
I was wondering about that bolt. thank you
Do you mean the bolt that is next to the bulging bolt on the side?
THANK YOU! Just bought my first of the exact same cutter and it was totally Greek to me!
Thank you!
Thank you for sharing, greetings from Ecuador
This was incredibly helpful, thank you!
Nice instructional video-thank you.
Great information! Thank you!
Thank you! You showed me how to remove gap.
Tegnap vásároltam egy Extol craft 600 24" szerszámot. Sajnos nem értem az angol beszédet, de talán segített így is.
Thank'u! 👋😁
Thank you so much.
Awesome! Thanks!
thanks for showing.
Thankyou
Thank you.
Im planning to buy 12 inch bolt cutter.thanks for info🎉
Thank.you.both.of.you
Is there any way to get the cutter to open wider ? To cut a thicker spoon for example. Asking for a friend
Get a larger set for larger locks.
Excelente muchas gracias.
Sweet 👍🏻 👍🏻
Thanks very useful
thank you
I'm glad you didn't see any air. lol
😂
Thank you very much ! Very helpful.. easy to understand for the beginner like me.
Thanks
hola muy bueno el video tengo el problema que se desalinea las punta o cuchilla y si lo dejo medio flojo para poder abrir se desalinea y si lo apretó mucho no puedo abrirlo no encuentro la solución
I have a vintage pair of HK Porter number zero, and number 14 cutters I’m going to restore. And how exactly do I adjust the colors on those older ones?
Sorry I do not know
Noooo! My beautiful world war II spoons!!
You can learn,be able too,,..... .
Space between the blades is normal not to damage them
What is the inch of this bolt cutter?
18” harbor freight bolt cutters
Can u adjust how fair they open up or not
No you can't. It is fixed by the manufacturer of the bolt cutter. It may vary from one manufacturer to another.
Those are nice spoons that you were wasting
Big ass help
I’m here to try and find out why your cutting the ends of spoons off in the first place 😂
🤣😂 The video was really made to help out people in a jewelry group I belong to. We made angel pendants out of those little ends.
Рахмет хоть кто-то обьяснил доступно
How many inch
The ones in the video are 18”
I know this is an old video but I have to tell you, you
are using the wrong tool, to cut your spoons.
You need a sheet metal shear. The spoons are a little thicker
than what you may consider sheet metal but that is what it is.
Bolt cutters are not made to cut sheet metal, that is why you
are having problems, with them. Specifically, you want a bench
mounted, long arm, sheet metal shear. 😁✌🖖
name ki😊
At first I thought those hands belonged to a lady😬😬 Loll
🤣